Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015 (2015), Article ID 103507, 9 pages
http://dx.doi.org/10.1155/2015/103507
Research Article

Modeling of the Feed-Motor Transient Current in End Milling by Using Varying-Coefficient Model

1State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
2School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

Received 4 July 2014; Accepted 16 October 2014

Academic Editor: Ivanka Stamova

Copyright © 2015 Mi Xiao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Mi Xiao, Long Wen, Xi Li, and Liang Gao, “Modeling of the Feed-Motor Transient Current in End Milling by Using Varying-Coefficient Model,” Mathematical Problems in Engineering, vol. 2015, Article ID 103507, 9 pages, 2015. doi:10.1155/2015/103507