Research Article
Modeling of the Feed-Motor Transient Current in End Milling by Using Varying-Coefficient Model
Table 3
The result of VCM method.
| Spindle speed | Total | 500 | 600 | 700 | 800 | 1000 | 1200 |
| VCM | | 0.9806 | 0.9910 | 0.9900 | 0.9876 | 0.9763 | 0.9768 | 0.9647 | MRE | 5.99% | 6.19% | 4.64% | 5.91% | 6.63% | 5.41% | 7.14% |
| Fourier series | | ā | 0.9690 | 0.9641 | 0.9548 | 0.9348 | 0.9378 | 0.8924 | MRE | ā | 5.36% | 5.21% | 5.80% | 6.76% | 6.71% | 8.56% |
|
|