Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 425689, 14 pages
http://dx.doi.org/10.1155/2015/425689
Research Article

Parameter Determination of Milling Process Using a Novel Teaching-Learning-Based Optimization Algorithm

School of Mechanical and Instrument Engineering, Xi’an University of Technology, 5 South Jinhua Road, Xi’an, Shaanxi 710048, China

Received 24 July 2015; Revised 29 September 2015; Accepted 7 October 2015

Academic Editor: Anna Vila

Copyright © 2015 Zhibo Zhai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Zhibo Zhai, Shujuan Li, and Yong Liu, “Parameter Determination of Milling Process Using a Novel Teaching-Learning-Based Optimization Algorithm,” Mathematical Problems in Engineering, vol. 2015, Article ID 425689, 14 pages, 2015. https://doi.org/10.1155/2015/425689.