Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 897257, 13 pages
http://dx.doi.org/10.1155/2015/897257
Research Article

Research on the Design and Modification of Asymmetric Spur Gear

School of Automotive Engineering, Hubei Key Laboratory of Advanced Technology of Automotive Parts, Wuhan University of Technology, Wuhan 430070, China

Received 9 June 2014; Accepted 17 October 2014

Academic Editor: Davide Spinello

Copyright © 2015 Xiaohe Deng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. D. Smith, Gear Noise and Vibration, Marcel Dekker, New York, NY, USA, 2003.
  2. F. L. Litvin, Gear Geometry and Applied Theory, Cambridge University Press, Cambridge, UK, 2nd edition, 2004.
  3. F. L. Litvin, Q. Lian, and A. L. Kapelevich, “Asymmetric modified spur gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis,” Computer Methods in Applied Mechanics and Engineering, vol. 188, no. 1, pp. 363–390, 2000. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Song, C. Zhu, T. C. Lim, and T. Peng, “Parametric analysis of gear mesh and dynamic response of loaded helical beveloid transmission with small shaft angle,” Journal of Mechanical Design, vol. 134, no. 8, Article ID 084501, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Y. Tang, Z. H. Hu, L. J. Wu, and S. Y. Chen, “Effect of static transmission error on dynamic responses of spiral bevel gears,” Journal of Central South University, vol. 20, no. 3, pp. 640–647, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. C. Huang, J.-X. Wang, K. Xiao, M. Li, and J.-Y. Li, “Dynamic characteristics analysis and experimental research on a new type planetary gear apparatus with small tooth number difference,” Journal of Mechanical Science and Technology, vol. 27, no. 5, pp. 1233–1244, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. F. L. Litvin, A. Fuentes, I. Gonzalez-Perez, L. Carvenali, K. Kawasaki, and R. F. Handschuh, “Modified involute helical gears: computerized design, simulation of meshing and stress analysis,” Computer Methods in Applied Mechanics and Engineering, vol. 192, no. 33-34, pp. 3619–3655, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Faggioni, F. S. Samani, G. Bertacchi, and F. Pellicano, “Dynamic optimization of spur gears,” Mechanism and Machine Theory, vol. 46, no. 4, pp. 544–557, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Barbieri, G. Bonori, and F. Pellicano, “Optimum profile modifications of spur gears by means of genetic algorithms,” Journal of Sound and Vibration, vol. 331, no. 21, pp. 4825–4829, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Zhang, L. Hua, and X. H. Han, “Computerized design and simulation of meshing of modified double circular-arc helical gears by tooth end relief with helix,” Mechanism and Machine Theory, vol. 45, no. 1, pp. 46–64, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. I. Gonzalez-Perez, J. L. Iserte, and A. Fuentes, “Implementation of Hertz theory and validation of a finite element model for stress analysis of gear drives with localized bearing contact,” Mechanism and Machine Theory, vol. 46, no. 6, pp. 765–783, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. K. J. Huang and H. W. Su, “Approaches to parametric element constructions and dynamic analyses of spur/helical gears including modifications and undercutting,” Finite Elements in Analysis and Design, vol. 46, no. 12, pp. 1106–1113, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Hu, Y. Shao, Z. Chen, and M. J. Zuo, “Transient meshing performance of gears with different modification coefficients and helical angles using explicit dynamic FEA,” Mechanical Systems and Signal Processing, vol. 25, no. 5, pp. 1786–1802, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Wei, W. Sun, and L. Wang, “Effects of flank deviation on load distributions for helical gear,” Journal of Mechanical Science and Technology, vol. 25, no. 7, pp. 1781–1789, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. Y.-J. Wu, J.-J. Wang, and Q.-K. Han, “Static/dynamic contact FEA and experimental study for tooth profile modification of helical gears,” Journal of Mechanical Science and Technology, vol. 26, no. 5, pp. 1409–1417, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. S. T. Li, “Finite element analyses for contact strength and bending strength of a pair of spur gears with machining errors, assembly errors and tooth modifications,” Mechanism and Machine Theory, vol. 42, no. 1, pp. 88–114, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. V. V. Simon, “Influence of tooth modifications on tooth contact in face-hobbed spiral bevel gears,” Mechanism and Machine Theory, vol. 46, no. 12, pp. 1980–1998, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. Z. Chen and Y. Shao, “Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack,” Mechanism and Machine Theory, vol. 62, pp. 63–74, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Sankar and M. Nataraj, “Profile modification-a design approach for increasing the tooth strength in spur gear,” International Journal of Advanced Manufacturing Technology, vol. 55, no. 1–4, pp. 1–10, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Wang, Y. Wang, and Z. Huo, “Finite element residual stress analysis of planetary gear tooth,” Advances in Mechanical Engineering, vol. 2013, Article ID 761957, 12 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Li and A. Kahraman, “A tribo-dynamic model of a spur gear pair,” Journal of Sound and Vibration, vol. 332, no. 20, pp. 4963–4978, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Kolivand and A. Kahraman, “A general approach to locate instantaneous contact lines of gears using surface of roll angle,” Journal of Mechanical Design, vol. 133, no. 1, Article ID 014503, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. T. Eritenel and R. G. Parker, “Nonlinear vibration of gears with tooth surface modifications,” Journal of Vibration and Acoustics, vol. 135, no. 5, Article ID 051005, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. O. Alipiev, “Geometric design of involute spur gear drives with symmetric and asymmetric teeth using the Realized Potential Method,” Mechanism and Machine Theory, vol. 46, no. 1, pp. 10–32, 2011. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  25. N. L. Pedersen, “Improving bending stress in spur gears using asymmetric gears and shape optimization,” Mechanism and Machine Theory, vol. 45, no. 11, pp. 1707–1720, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. S.-C. Hwang, J.-H. Lee, D.-H. Lee, S.-H. Han, and K.-H. Lee, “Contact stress analysis for a pair of mating gears,” Mathematical and Computer Modelling, vol. 57, no. 1-2, pp. 40–49, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus