Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 982785, 12 pages
http://dx.doi.org/10.1155/2015/982785
Research Article

Thermomechanical-Phase Transformation Simulation of High-Strength Steel in Hot Stamping

State Key Laboratory of Structural Analysis for Industrial Equipment, Faculty of Vehicle and Mechanics, Dalian University of Technology, Dalian 116024, China

Received 18 September 2014; Accepted 1 December 2014

Academic Editor: Chenfeng Li

Copyright © 2015 Wenhua Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Wenhua Wu, Ping Hu, and Guozhe Shen, “Thermomechanical-Phase Transformation Simulation of High-Strength Steel in Hot Stamping,” Mathematical Problems in Engineering, vol. 2015, Article ID 982785, 12 pages, 2015. https://doi.org/10.1155/2015/982785.