Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 1409872, 13 pages
http://dx.doi.org/10.1155/2016/1409872
Research Article

High-Speed X-Ray Transmission and Numerical Study of Melt Flows inside the Molten Pool during Laser Welding of Aluminum Alloy

1State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China
2Harbin Welding Institute, Harbin, Heilongjiang 150080, China
3Joining and Welding Research Institute (JWRI), Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 567-0047, Japan

Received 27 February 2016; Revised 9 June 2016; Accepted 15 June 2016

Academic Editor: Mohsen Asle Zaeem

Copyright © 2016 Jin Peng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [5 citations]

The following is the list of published articles that have cited the current article.

  • Qihao Chen, Sanbao Lin, Chunli Yang, Chenglei Fan, and Hongliang Ge, “Grain fragmentation in ultrasonic-assisted TIG weld of pure aluminum,” Ultrasonics Sonochemistry, vol. 39, pp. 403–413, 2017. View at Publisher · View at Google Scholar
  • Xiaohu Wang, Jin Peng, Xingxing Wang, Gang Li, and Datian Cui, “Effect of Laser Welding with Filler Wire on Molten Pool Dynamic Behavior and Weld Formation,” Zhongguo Jiguang/Chinese Journal of Lasers, vol. 44, no. 11, 2017. View at Publisher · View at Google Scholar
  • Mingqi Tang, Jin Peng, Xingxing Wang, and Liqun Li, “Characteristics of Laser Welding with Pre-Melted Liquid Filler by Arc,” Xiyou Jinshu/Chinese Journal of Rare Metals, vol. 42, no. 9, pp. 937–942, 2018. View at Publisher · View at Google Scholar
  • Jin Peng, Xingxing Wang, Wenjie Zhang, Guoquan Guo, and Furong Zhang, “Numerical simulation of effect of filler wire melting and filling mode on molten pool in laser welding,” Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering, vol. 47, no. 3, 2018. View at Publisher · View at Google Scholar
  • Jiansheng Wang, Furong Zhang, Jin Peng, Sumeng Hu, and Xingxing Wang, “Effect of Filler Metal on Three-Dimensional Transient Behavior of Keyholes and Molten Pools in Laser Welding,” Zhongguo Jiguang/Chinese Journal of Lasers, vol. 45, no. 1, 2018. View at Publisher · View at Google Scholar