Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016 (2016), Article ID 1593849, 13 pages
http://dx.doi.org/10.1155/2016/1593849
Research Article

Simulation of Partial and Supercavitating Flows around Axisymmetric and Quasi-3D Bodies by Boundary Element Method Using Simple and Reentrant Jet Models at the Closure Zone of Cavity

Ferdowsi University of Mashhad, P.O. Box 91775-1111, Mashhad, Iran

Received 3 February 2016; Accepted 10 April 2016

Academic Editor: Song Cen

Copyright © 2016 M. Nouroozi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. A. Euteneuer, Further studies into the dynamics of a supercavitating torpedo [Ph.D. thesis], Department of Aerospace Engineering and Mechanics, University of Minnesota, Minneapolis, Minn, USA, 2003.
  2. J. P. Franc and J. M. Michel, Fundamental of Cavitation, Kluwer Academic, Amsterdam, Netherlands, 2004.
  3. K. R. Labertaux and S. L. Ceccio, “Partial cavity flows (part 1), cavities forming on models without span wise variation,” Journal of Fluid Mechanics, vol. 431, pp. 1–41, 2001. View at Google Scholar
  4. S. A. Kinnas and N. E. Fine, “A numerical nonlinear analysis of the flow around two- and three-dimensional partially cavitating hydrofoils,” Journal of Fluid Mechanics, vol. 254, pp. 151–181, 1993. View at Publisher · View at Google Scholar · View at Scopus
  5. A. G. Efros, “Hydrodynamic theory of two-dimensional flow with cavitation,” Doklady Akademii Nauk SSSR, vol. 51, pp. 267–270, 1946. View at Google Scholar
  6. D. Gilbarg and J. Serrin, “Free boundaries and jets in the theory of cavitation,” Journal of Mathematics and Physics, vol. 29, no. 1–4, pp. 1–12, 1950. View at Publisher · View at Google Scholar
  7. M. P. Tulin, “Steady two-dimensional cavity flows about slender bodies,” Tech. Rep. DTMB 834, Navy Department, Washington, DC, USA, 1953. View at Google Scholar
  8. M. P. Tulin, “Supercavitating flows—small perturbation theory,” Journal of Ship Research, vol. 7, no. 3, pp. 16–37, 1963. View at Google Scholar
  9. J. A. Guerst, Linearized theory of two-dimensional cavity flows [Ph.D. thesis], Delft University of Technology, Delft, Netherlands, 1961.
  10. J. L. Hess and A. M. O. Smith, “Calculation of potential flow about arbitrary three-dimensional bodies,” Progress in Aeronautical Science, vol. 8, pp. 1–138, 1966. View at Google Scholar
  11. J. S. Uhlman, “The surface singularity method applied to partially cavitating hydrofoils,” Journal of Ship Research, vol. 31, no. 2, pp. 107–124, 1987. View at Google Scholar
  12. J. S. Uhlman, “The surface singularity or boundary integral method applied to supercavitating hydrofoils,” Journal of Ship Research, vol. 33, no. 1, pp. 16–20, 1989. View at Google Scholar
  13. S. A. Kinnas and N. E. Fine, “Non-linear analysis of the flow around partially or super-cavitating hydrofoils by a potential based panel method,” in Boundary Integral Methods: Theory and Applications Proceedings of the IABEM Symposium Rome, Italy, October 15–19, 1990, pp. 289–300, Springer, Berlin, Germany, 1991. View at Publisher · View at Google Scholar
  14. G. Birkhoff and E. H. Zarantonello, Jets, Wakes and Cavities, Academic Press, New York, NY, USA, 1957.
  15. D. Gilbarg, “Jets and cavities,” in Handbuch der Physik, vol. 9, Springer, Berlin, Germany, 1960. View at Google Scholar
  16. C. Pellone and A. Rowe, “Supercavitating hydrofoils in non-linear theory,” in Proceedings of the 3rd International Conference on Numerical Ship Hydrodynamics, Paris, France, 1981.
  17. N. E. Fine and S. A. Kinnas, “A boundary element method for the analysis of the flow around 3-D cavitating hydrofoils,” Journal of Ship Research, vol. 37, no. 3, pp. 213–224, 1993. View at Google Scholar
  18. V. B. Vaz, Modelling of sheet cavitation on hydrofoils and marine propellers using boundary element methods [Ph.D. thesis], Universidade T’ecnica de Lisboa, Lisbon, Portugal, 2005.
  19. J. S. Uhlman, “A note on the development of a nonlinear axisymmetric reentrant jet cavitation model,” Journal of Ship Research, vol. 50, no. 3, pp. 259–267, 2006. View at Google Scholar · View at Scopus
  20. N. M. Nouri, M. Moghimi, and S. M. H. Mirsaeedi, “Numerical simulation of unsteady cavitating flow over a disc,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 224, no. 6, pp. 1245–1253, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. I. Rashidi, M. Passandideh-Fard, and M. Pasandideh-Fard, “The optimum design of a cavitator for high-speed axisymmetric bodies in partially cavitating flows,” Journal of Fluids Engineering, Transactions of the ASME, vol. 135, no. 1, Article ID 011301, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Callenaere, J.-P. Franc, J.-M. Michel, and M. Riondet, “The cavitation instability induced by the development of a re-entrant jet,” Journal of Fluid Mechanics, vol. 444, pp. 223–256, 2001. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Washio, S. Takashashi, and S. Yoshimori, “Study on cavitation starting at the point of separation on a smooth wall in hydraulic oil flow,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 217, no. 6, pp. 619–630, 2003. View at Publisher · View at Google Scholar · View at Scopus
  24. H.-F. Peng, M. Cui, and X.-W. Gao, “A boundary element method without internal cells for solving viscous flow problems,” Engineering Analysis with Boundary Elements, vol. 37, no. 2, pp. 293–300, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  25. M. Manninen, V. Taivassalo, and S. Kallio, On the Mixture Model for Multiphase Flow, Technical Research Centre of Finland, VTT Publications 288. 67, 1996.
  26. H. Rouse and J. S. Mc Nown, “Cavitation and pressure distribution,” in Head Forms at Zero angle of Yaw, vol. 32 of Studies in Engineering, State University of Iowa, 1948. View at Google Scholar
  27. M. L. Billet and D. S. Weir, “The effect of gas diffusion on the flow coefficient for a ventilated cavity,” Journal of Fluids Engineering, vol. 97, no. 4, pp. 501–505, 1975. View at Publisher · View at Google Scholar