Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 3728397, 15 pages
http://dx.doi.org/10.1155/2016/3728397
Research Article

An Ultra-Low Frequency Two DOFs’ Vibration Isolator Using Positive and Negative Stiffness in Parallel

The State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei, China

Received 26 July 2016; Revised 27 October 2016; Accepted 3 November 2016

Academic Editor: Roland Hildebrand

Copyright © 2016 Min Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. G. Gordon, “Generic vibration vriteria for vibration-sensitive equipment,” in Proceedings of the International Society for Optical Engineering (SPIE) Conference on Current Developments in Vibration Control for Optomechanical Systems, E. A. Derby, Ed., International Society for Optics and Photonics, pp. 22–33, Denver, Colo, USA, July 1999.
  2. E. H. Anderson and B. Houghton, “ELITE-3 active vibration isolation workstation,” in Proceedings of the 8th Annual International Symposium on Smart Structures and Materials, pp. 183–196, International Society for Optics and Photonics, March 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. Y.-H. Shin and K.-J. Kim, “Performance enhancement of pneumatic vibration isolation tables in low frequency range by time delay control,” Journal of Sound and Vibration, vol. 321, no. 3–5, pp. 537–553, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Julai and M. Tokhi, “Active vibration control of flexible plate structures with distributed disturbances,” Journal of Low Frequency Noise Vibration and Active Control, vol. 31, no. 2, pp. 123–150, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Yan, M. J. Brennan, S. J. Elliott, and N. S. Ferguson, “Active vibration isolation of a system with a distributed parameter isolator using absolute velocity feedback control,” Journal of Sound and Vibration, vol. 329, no. 10, pp. 1601–1614, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Yasuda, T. Osaka, and M. Ikeda, “Feedforward control of a vibration isolation system for disturbance suppression,” in Proceedings of the 35th IEEE Conference on Decision and Control, pp. 1229–1233, Kobe, Japan, December 1996. View at Publisher · View at Google Scholar · View at Scopus
  7. T. H. Yan, H. Y. Pu, X. D. Chen, Q. Li, and C. Xu, “Integrated hybrid vibration isolator with feedforward compensation for fast high-precision positioning X/Y tables,” Measurement Science and Technology, vol. 21, no. 6, Article ID 065901, 10 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. D. L. Platus, “Negative-stiffness-mechanism Vibration Isolation Systems,” in Proceedings of the SPIE's International Symposium on Optical Science, Engineering, and Instrumentation, International Society for Optics and Photonics, pp. 98–105, 1999.
  9. B. A. Fulcher, D. W. Shahan, M. R. Haberman, C. C. Seepersad, and P. S. Wilson, “Analytical and experimental investigation of buckled beams as negative stiffness elements for passive vibration and shock isolation systems,” Journal of Vibration and Acoustics, vol. 136, no. 3, Article ID 031009, 12 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. M. E. Hoque, T. Mizuno, Y. Ishino, and M. Takasaki, “A three-axis vibration isolation system using modified zero-power controller with parallel mechanism technique,” Mechatronics, vol. 21, no. 6, pp. 1055–1062, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. T. Mizuno, M. Takasaki, D. Kishita, and K. Hirakawa, “Vibration isolation system combining zero-power magnetic suspension with springs,” Control Engineering Practice, vol. 15, no. 2, pp. 187–196, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. W. S. Robertson, M. R. F. Kidner, B. S. Cazzolato, and A. C. Zander, “Theoretical design parameters for a quasi-zero stiffness magnetic spring for vibration isolation,” Journal of Sound and Vibration, vol. 326, no. 1-2, pp. 88–103, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Valeev, A. Zotov, and S. Kharisov, “Designing of compact low frequency vibration isolator with quasi-zero-stiffness,” Journal of Low Frequency Noise Vibration and Active Control, vol. 34, no. 4, pp. 459–474, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Carrella, M. J. Brennan, and T. P. Waters, “Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic,” Journal of Sound and Vibration, vol. 301, no. 3, pp. 678–689, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. P. Alabuzhev, A. Gritchin, L. Kim, G. Migirenko, V. Chon, and P. Stepanov, Vibration Protecting and Measuring Systems with Quasi-Zero Stiffness, CRC Press Hemisphere, New York, NY, USA, 1989.
  16. A. Carrella, M. J. Brennan, T. P. Waters, and K. Shin, “On the design of a high-static-low-dynamic stiffness isolator using linear mechanical springs and magnets,” Journal of Sound and Vibration, vol. 315, no. 3, pp. 712–720, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. A. D. Shaw, S. A. Neild, and D. J. Wagg, “Dynamic analysis of high static low dynamic stiffness vibration isolation mounts,” Journal of Sound and Vibration, vol. 332, no. 6, pp. 1437–1455, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. W. Wu, X. Chen, and Y. Shan, “Analysis and experiment of a vibration isolator using a novel magnetic spring with negative stiffness,” Journal of Sound and Vibration, vol. 333, no. 13, pp. 2958–2970, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Akoun and J.-P. Yonnet, “3D analytical calculation of the forces exerted between two cuboidal magnets,” IEEE Transactions on Magnetics, vol. 20, no. 5, pp. 1962–1964, 1984. View at Publisher · View at Google Scholar · View at Scopus
  20. T. H. Lee, K. K. Tan, S. N. Huang, and H. F. Dou, “Intelligent control of precision linear actuators,” Engineering Applications of Artificial Intelligence, vol. 13, no. 6, pp. 671–684, 2000. View at Publisher · View at Google Scholar · View at Scopus