Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 4368680, 16 pages
http://dx.doi.org/10.1155/2016/4368680
Research Article

Nonlinear Modeling and Dynamic Simulation Using Bifurcation and Stability Analyses of Regenerative Chatter of Ball-End Milling Process

School of Mechanical Engineering, College of Engineering, Chung-Ang University, 84 HeukSeok-Ro, DongJak-Gu, Seoul 156-756, Republic of Korea

Received 10 November 2015; Revised 15 January 2016; Accepted 18 January 2016

Academic Editor: Gen Qi Xu

Copyright © 2016 Jeehyun Jung et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H.-Y. Feng and C.-H. Menq, “The prediction of cutting forces in the ball-end milling process—I. Model formulation and model building procedure,” International Journal of Machine Tools and Manufacture, vol. 34, no. 5, pp. 697–710, 1994. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Azeem, H.-Y. Feng, and L. Wang, “Simplified and efficient calibration of a mechanistic cutting force model for ball-end milling,” International Journal of Machine Tools and Manufacture, vol. 44, no. 2-3, pp. 291–298, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. H.-Y. Feng and N. Su, “A mechanistic cutting force model for 3D ball-end milling,” Journal of Manufacturing Science and Engineering, vol. 123, no. 1, pp. 23–29, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Azeem and H.-Y. Feng, “Cutting force prediction for ball-end mills with non-horizontal and rotational cutting motions,” The International Journal of Advanced Manufacturing Technology, vol. 67, no. 5–8, pp. 1833–1845, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. P. Lee and Y. Altıntaş, “Prediction of ball-end milling forces from orthogonal cutting data,” International Journal of Machine Tools and Manufacture, vol. 36, no. 9, pp. 1059–1072, 1996. View at Publisher · View at Google Scholar · View at Scopus
  6. Y.-H. Jung, J.-S. Kim, and S.-M. Hwang, “Chip load prediction in ball-end milling,” Journal of Materials Processing Technology, vol. 111, no. 1–3, pp. 250–255, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Sun, F. Ren, D. Guo, and Z. Jia, “Estimation and experimental validation of cutting forces in ball-end milling of sculptured surfaces,” International Journal of Machine Tools and Manufacture, vol. 49, no. 15, pp. 1238–1244, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. Z. C. Wei, M. J. Wang, J. N. Zhu, and L. Y. Gu, “Cutting force prediction in ball end milling of sculptured surface with Z-level contouring tool path,” International Journal of Machine Tools and Manufacture, vol. 51, no. 5, pp. 428–432, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. C. Wei, M. J. Wang, Y. J. Cai, and S. F. Wang, “Prediction of cutting force in ball-end milling of sculptured surface using improved Z-map,” International Journal of Advanced Manufacturing Technology, vol. 68, no. 5-8, pp. 1167–1177, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. S. N. Melkote and W. J. Endres, “The importance of including size effect when modeling slot milling,” Journal of Manufacturing Science and Engineering, vol. 120, no. 1, pp. 68–75, 1998. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Stepan and T. Kalmar-Nagy, “Nonlinear regenerative machine tool vibrations,” in Proceedings of the 16th ASME Biennial Conference on Mechanical Vibration and Noise, DETC97/VIB-4021, pp. 1–11, Sacramento, Calif, USA, September 1997.
  12. T. Kalmár-Nagy, G. Stépán, and F. C. Moon, “Subcritical Hopf bifurcation in the delay equation model for machine tool vibrations,” Nonlinear Dynamics, vol. 26, no. 2, pp. 121–142, 2001. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  13. Z. Dombovari, R. E. Wilson, and G. Stepan, “Estimates of the bistable region in metal cutting,” Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol. 464, no. 2100, pp. 3255–3271, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. Z. Dombovari and G. Stepan, “On the bistable zone of milling processes,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 373, no. 2051, Article ID 20140409, 2015. View at Publisher · View at Google Scholar
  15. Y. Altıntaş and P. Lee, “Mechanics and dynamics of ball end milling,” Journal of Manufacturing Science and Engineering—Transactions of the ASME, vol. 120, no. 4, pp. 684–691, 1998. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. Altıntaş and E. Budak, “Analytical prediction of stability lobes in milling,” CIRP Annals—Manufacturing Technology, vol. 44, no. 1, pp. 357–362, 1995. View at Publisher · View at Google Scholar · View at Scopus
  17. F. Abrari and M. A. Elbestawi, “Closed form formulation of cutting forces for ball and flat end mills,” International Journal of Machine Tools and Manufacture, vol. 37, no. 1, pp. 17–27, 1997. View at Publisher · View at Google Scholar · View at Scopus
  18. F. Abrari, M. A. Elbestawi, and A. D. Spence, “On the dynamics of ball end milling: modeling of cutting forces and stability analysis,” International Journal of Machine Tools and Manufacture, vol. 38, no. 3, pp. 215–237, 1998. View at Publisher · View at Google Scholar · View at Scopus
  19. E. Ozturk and E. Budak, “Dynamics and stability of five-axis ball-end milling,” Journal of Manufacturing Science and Engineering, vol. 132, no. 2, Article ID 021003, 13 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Altıntaş, G. Stepan, D. Merdol, and Z. Dombovari, “Chatter stability of milling in frequency and discrete time domain,” CIRP Journal of Manufacturing Science and Technology, vol. 1, no. 1, pp. 35–44, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. A. H. Nayfeh and D. T. Mook, Nonlinear Oscillations, John Wiley & Sons, Hoboken, NJ, USA, 2008.
  22. Y. Altıntaş, E. Shamoto, P. Lee, and E. Budak, “Analytical prediction of stability lobes in ball end milling,” Journal of Manufacturing Science and Engineering, vol. 121, no. 4, pp. 586–592, 1999. View at Publisher · View at Google Scholar · View at Scopus
  23. E. Budak and Y. Altıntaş, “Analytical prediction of chatter stability in milling—part I: general formulation,” Journal of Dynamic Systems, Measurement and Control—Transactions of the ASME, vol. 120, no. 1, pp. 22–30, 1998. View at Publisher · View at Google Scholar · View at Scopus
  24. E. Budak and Y. Altıntaş, “Analytical prediction of chatter stability in milling—part II: application of the general formulation to common milling systems,” Journal of Dynamic Systems, Measurement, and Control, vol. 120, no. 1, pp. 31–36, 1998. View at Publisher · View at Google Scholar · View at Scopus
  25. E. Ozturk and E. Budak, “Chatter stability of 5-axis milling using multi-frequency solution,” in Proceedings of the 3rd International Conference on High Performance Cutting, HPC-P-066, pp. 429–444, Dublin, Ireland, June 2008.
  26. T. Insperger and G. Stépán, Semi-Discretization for Time-Delay Systems: Stability and Engineering Applications, vol. 178 of Applied Mathematical Sciences, Springer Science & Business Media, New York, NY, USA, 2011. View at Publisher · View at Google Scholar
  27. Y. Altıntaş, “Analytical prediction of three dimensional chatter stability in milling,” JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing, vol. 44, no. 3, pp. 717–723, 2001. View at Publisher · View at Google Scholar · View at Scopus
  28. P. Kim and J. Seok, “Bifurcation analyses on the chatter vibrations of a turning process with state-dependent delay,” Nonlinear Dynamics, vol. 69, no. 3, pp. 891–912, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. Maplesoft, Maple 14. 2010, Maplesoft.
  30. G. Stépán, “Modelling nonlinear regenerative effects in metal cutting,” Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol. 359, no. 1781, pp. 739–757, 2001. View at Publisher · View at Google Scholar · View at Scopus
  31. Z. Dombovari, R. E. Wilson, and G. Stepan, “Estimates of the bistable region in metal cutting,” Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 464, no. 2100, pp. 3255–3271, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  32. L. F. Shampine and S. Thompson, “Solving DDEs in matlab,” Applied Numerical Mathematics, vol. 37, no. 4, pp. 441–458, 2001. View at Publisher · View at Google Scholar · View at Scopus
  33. Mathworks, Matlab Version 8.2, Mathworks Inc, 2013.
  34. E. Budak, Y. Altıntaş, and E. J. A. Armarego, “Prediction of milling force coefficients from orthogonal cutting data,” Journal of Manufacturing Science and Engineering, vol. 118, no. 2, pp. 216–224, 1996. View at Publisher · View at Google Scholar · View at Scopus
  35. J. H. Ko and D.-W. Cho, “3D ball-end milling force model using instantaneous cutting force coefficients,” Journal of Manufacturing Science and Engineering, vol. 127, no. 1, pp. 1–12, 2005. View at Publisher · View at Google Scholar · View at Scopus
  36. R. Salami, M. H. Sadeghi, and B. Motakef, “Feed rate optimization for 3-axis ball-end milling of sculptured surfaces,” International Journal of Machine Tools and Manufacture, vol. 47, no. 5, pp. 760–767, 2007. View at Publisher · View at Google Scholar · View at Scopus