Mathematical Problems in Engineering / 2016 / Article / Proc 3

Research Article

Sectorization and Configuration Transition in Airspace Design

Procedure 3

Procedures of the CHAM.
() For
()   Get path(s) on , set as (See Definition 4 in Section 4.3.2)
()   For each path ,
()    Define vertices along as and corresponding
      (note that when corresponding cross-sector edge has not been designed)
()    Set , .
()    While
()     If cross-sector edges referred by and are both designed
()      If line segment is infeasible (See Definition 5 in Section 4.3.2)
()        Execute the OABD to (See Explain in Section 4.3.2)
()    End
()    , go to line ()
()   End
()   While line segment is feasible (See Definition 5 in Section 4.3.2)
()    
()    If cross-sector edges referred by and are both designed
()     break
()    End
()   End
()   If
()    Execute the OABD to (See Explain in Section 4.3.2).
()    Set the cross-sector edge referred by as designed, remain
()    , go to line ()
()   End
()   Else
()    
()    Draw line segment ,
()    Set cross-sector edges referred by as designed
()    Set as the intersections of related cross-sector edges
      and line segment
()    , reset , go to line ()
()   End
()  End
() End
() End

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.