Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 6274509, 13 pages
http://dx.doi.org/10.1155/2016/6274509
Research Article

Steady-State Thermoelastic Analytical Solutions for Insulated Pipelines

1Department of Structures for Engineering and Architecture, University of Napoli Federico II, Napoli, Italy
2Interdisciplinary Research Center for Biomaterials, University of Napoli Federico II, Napoli, Italy
3Department of Fire Watch, Public Rescue and Civil Protection, Italian Ministry of Interior, Roma, Italy
4Department of Chemical, Materials and Production Engineering, University of Napoli Federico II, Napoli, Italy

Received 3 May 2016; Revised 9 August 2016; Accepted 18 September 2016

Academic Editor: Francesco Pellicano

Copyright © 2016 M. Fraldi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. A. Boley and J. H. Weiner, Theory of Thermal Stresses, Dover, Mineola, NY, USA, 1997.
  2. F. Alavi, D. Karimi, and A. Bagri, “An investigation on thermo-elastic behaviour of functionally graded thick spherical vessels under combined thermal and mechanical loads,” Journal of Achievements in Materials and Manufacturing Engineering, vol. 31, no. 2, pp. 422–428, 2008. View at Google Scholar
  3. A. N. Eraslan and T. Akis, “Plane strain analytical solutions for a functionally graded elastic-plastic pressurized tube,” International Journal of Pressure Vessels and Piping, vol. 83, no. 9, pp. 635–644, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Obata and N. Noda, “Steady thermal stresses in a hollow circular cylinder and a hollow sphere of a functionally gradient material,” Journal of Thermal Stresses, vol. 17, no. 3, pp. 471–487, 1994. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Ootao and Y. Tanigawa, “Three-dimensional transient thermal stresses of functionally graded rectangular plate due to partial heating,” Journal of Thermal Stresses, vol. 22, no. 1, pp. 35–55, 1999. View at Publisher · View at Google Scholar · View at Scopus
  6. K.-S. Kim and N. Noda, “Green's function approach to unsteady thermal stresses in an infinite hollow cylinder of functionally graded material,” Acta Mechanica, vol. 156, no. 3-4, pp. 145–161, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Jabbari, S. Sohrabpour, and M. R. Eslami, “Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads,” International Journal of Pressure Vessels and Piping, vol. 79, no. 7, pp. 493–497, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. A. N. Eraslan, “Thermally induced deformations of composite tubes subjected to a nonuniform heat source,” Journal of Thermal Stresses, vol. 26, no. 2, pp. 167–193, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. S. Shao, “Mechanical and thermal stresses of a functionally graded circular hollow cylinder with finite length,” International Journal of Pressure Vessels and Piping, vol. 82, no. 3, pp. 155–163, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Fraldi, F. Carannante, and L. Nunziante, “Analytical solutions for n-phase functionally graded material cylinders under de saint venant load conditions: homogenization and effects of poisson ratios on the overall stiffness,” Composites Part B: Engineering, vol. 45, no. 1, pp. 1310–1324, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Fraldi, L. Nunziante, and F. Carannante, “Axis-symmetrical solutions for n-plies functionally graded material cylinders under strain no-decaying conditions,” Mechanics of Advanced Materials and Structures, vol. 14, no. 3, pp. 151–174, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. K. M. Liew, S. Kitipornchai, X. Z. Zhang, and C. W. Lim, “Analysis of the thermal stress behaviour of functionally graded hollow circular cylinders,” International Journal of Solids and Structures, vol. 40, no. 10, pp. 2355–2380, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. N. Bouchonneau, V. Sauvant-Moynot, D. Choqueuse, F. Grosjean, E. Poncet, and D. Perreux, “Experimental testing and modelling of an industrial insulated pipeline for deep sea application,” Journal of Petroleum Science and Engineering, vol. 73, no. 1-2, pp. 1–12, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. Y.-S. Choi, M.-K. Chung, and J.-G. Kim, “Effects of cyclic stress and insulation on the corrosion fatigue properties of thermally insulated pipeline,” Materials Science and Engineering A, vol. 384, no. 1-2, pp. 47–56, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. D. Deng and H. Murakawa, “Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements,” Computational Materials Science, vol. 37, no. 3, pp. 269–277, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Yaghi, T. H. Hyde, A. A. Becker, W. Sun, and J. A. Williams, “Residual stress simulation in thin and thick-walled stainless steel pipe welds including pipe diameter effects,” International Journal of Pressure Vessels and Piping, vol. 83, no. 11-12, pp. 864–874, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. H. F. Nied and F. Erdogan, “Transient thermal stress problem for a circumferentially cracked hollow cylinder,” NASA Contractor Report 165989, 1982. View at Google Scholar
  18. M. Nemat-Alla, K. I. E. Ahmed, and I. Hassab-Allah, “Elastic-plastic analysis of two-dimensional functionally graded materials under thermal loading,” International Journal of Solids and Structures, vol. 46, no. 14-15, pp. 2774–2786, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. T. Akis, “Elastoplastic analysis of functionally graded spherical pressure vessels,” Computational Materials Science, vol. 46, no. 2, pp. 545–554, 2009. View at Publisher · View at Google Scholar · View at Scopus