Research Article
CO2 Permeability Analysis of Caprock Containing a Single Fracture Subject to Coupled Thermal-Hydromechanical Effects
Table 2
Parameters used in 2D THM coupled model.
| Parameter | Value | Note |
| Density, kg/m3 | 2500 | Rock matrix | Young’s modulus, GPa | 100 | Poisson’s ratio | 0.3 | Heat conductivity, W/(m × K) | 2.57 | Specific heat capacity, J/(m × K) | 710 | Thermal expansion, 1/K | 6.0 × 10−7 |
| Initial normal stiffness of fracture closure, GPa/m | 60 | Fracture | Normal stiffness of fracture opening, GPa/m | 100 | Initial aperture, m | | Residual aperture, m | 1 × 10−6 | Maximum aperture, m | 0.002 | Fluid pressure at the lower side, MPa | | Fluid pressure at the upper side, MPa | |
| Density, kg/m3 | Figure 6(a) | Supercritical CO2 | Dynamic viscosity, Pa⋅s | Figure 6(b) | Compression coefficient, 1/Pa | Calculated with Figure 6(a) | Thermal expansion, 1/K | Calculated with Figure 6(b) |
|
|