Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017 (2017), Article ID 1864321, 17 pages
https://doi.org/10.1155/2017/1864321
Research Article

A Self-Tuning Proportional-Integral-Derivative-Based Temperature Control Method for Draw-Texturing-Yarn Machine

1Wenzhou Vocational & Technical College, Wenzhou 325035, China
2Hangzhou Medical College, Hangzhou 310053, China

Correspondence should be addressed to Shuting Chen; moc.361@nernituhs

Received 1 October 2017; Accepted 12 November 2017; Published 6 December 2017

Academic Editor: Marco Spadini

Copyright © 2017 Rong Song and Shuting Chen. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. A. Kim and S. J. Kim, “Moisture and thermal permeability of the hollow textured PET imbedded woven fabrics for high emotional garments,” Fibers and Polymers, vol. 17, no. 3, pp. 427–438, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. M. H. Shim, J. Kim, and C. H. Park, “Development of superhydrophobic fabrics by surface fluorination and formation of CNT-induced roughness,” Medziagotyra, vol. 21, no. 1, pp. 68–73, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. X. Yan, L. Xu, and Y. Wang, “The Loading Control Strategy of the Mobile Dynamometer Vehicle Based on Neural Network PID,” Mathematical Problems in Engineering, vol. 2017, Article ID 5658983, 7 pages, 2017. View at Publisher · View at Google Scholar
  4. W. Belhaj and O. Boubaker, “MIMO PI controllers for LTI systems with multiple time delays based on ILMIs and sensitivity functions,” Mathematical Problems in Engineering, vol. 2017, Article ID 1241545, 25 pages, 2017. View at Publisher · View at Google Scholar
  5. D. Tan, S. Ji, P. Li, and X. Pan, “Development of vibration style ladle slag detection methods and the key technologies,” Science China Technological Sciences, vol. 53, no. 9, pp. 2378–2387, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. D. P. Tan and L. B. Zhang, “A WP-based nonlinear vibration sensing method for invisible liquid steel slag detection,” Sensors and Actuators B: Chemical, vol. 202, pp. 1257–1269, 2014. View at Publisher · View at Google Scholar
  7. L. Zhang, J. Wang, D. Tan, and Z. Yuan, “Gas compensation-based abrasive flow processing method for complex titanium alloy surfaces,” The International Journal of Advanced Manufacturing Technology, vol. 92, no. 9-12, pp. 3385–3397, 2017. View at Publisher · View at Google Scholar
  8. S. M. Attaran, R. Yusof, and H. Selamat, “A novel optimization algorithm based on epsilon constraint-RBF neural network for tuning PID controller in decoupled HVAC system,” Applied Thermal Engineering, vol. 99, pp. 613–624, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Trafczynski, M. Markowski, S. Alabrudzinski, and K. Urbaniec, “The influence of fouling on the dynamic behavior of PID-controlled heat exchangers,” Applied Thermal Engineering, vol. 109, pp. 727–738, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Moradi, H. Setayesh, and A. Alasty, “PID-Fuzzy control of air handling units in the presence of uncertainty,” International Journal of Thermal Sciences, vol. 109, pp. 123–135, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Li, X. Li, and Y. Yang, “Intelligent model building and GPC-PID based temperature curve control strategy for metallurgical industry,” Mathematical Problems in Engineering, vol. 2016, Article ID 7454805, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Kanagalakshmi, D. Manamalli, and M. Mohamedrafiq, “Implementation of multimodel-based PID and intelligent controller for simulated and real-time temperature control of injection molding machine,” Chemical Engineering Communications, vol. 203, no. 4, pp. 452–462, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Zhang, C. Ma, and R. Zhu, “Self-tuning fully-connected PID neural network system for distributed temperature sensing and control of instrument with multi-modules,” Sensors, vol. 16, no. 10, article 1709, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Pamela and M. S. Godwin Premi, “Wireless Control and Automation of Hot Air Temperature in Oven for Sterilization using Fuzzy PID Controller and Adaptive Smith Predictor,” Wireless Personal Communications, vol. 94, no. 4, pp. 2055–2064, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Zhang, “Design of a new PID controller using predictive functional control optimization for chamber pressure in a coke furnace,” ISA Transactions®, vol. 67, pp. 208–214, 2017. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Chen, F. Xu, D. Tan, Z. Shen, L. Zhang, and Q. Ai, “A control method for agricultural greenhouses heating based on computational fluid dynamics and energy prediction model,” Applied Energy, vol. 141, no. 1, pp. 106–118, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Tan, Y. Ni, and L. Zhang, “Two-phase sink vortex suction mechanism and penetration dynamic characteristics in ladle teeming process,” Journal of Iron and Steel Research, International, vol. 24, no. 7, pp. 669–677, 2017. View at Publisher · View at Google Scholar
  18. S. Chiriţă, M. Ciarletta, and V. Tibullo, “On the thermomechanical consistency of the time differential dual-phase-lag models of heat conduction,” International Journal of Heat and Mass Transfer, vol. 114, pp. 277–285, 2017. View at Publisher · View at Google Scholar
  19. D.-P. Tan, S.-T. Chen, G.-J. Bao, and L.-B. Zhang, “An embedded lightweight GUI component library and the ergonomics optimization method for industry process monitoring,” Frontiers of Information Technology & Electronic Engineering, vol. 1, no. 1, 1998. View at Publisher · View at Google Scholar
  20. X. Zeng, S.-M. Ji, M.-S. Jin, D.-P. Tan, J.-H. Li, and W.-T. Zeng, “Investigation on machining characteristic of pneumatic wheel based on softness consolidation abrasives,” International Journal of Precision Engineering and Manufacturing, vol. 15, no. 10, pp. 2031–2039, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. X. Zeng, S.-M. Ji, D.-P. Tan, M.-S. Jin, D.-H. Wen, and L. Zhang, “Softness consolidation abrasives material removal characteristic oriented to laser hardening surface,” The International Journal of Advanced Manufacturing Technology, vol. 69, no. 9-12, pp. 2323–2332, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. D.-P. Tan, T. Yang, J. Zhao, and S.-M. Ji, “Free sink vortex Ekman suction-extraction evolution mechanism,” Acta Physica Sinica, vol. 65, no. 5, Article ID 054701, 2016. View at Google Scholar
  23. W. Mingge, L. Congda, T. Dapeng, H. Tao, C. Guohai, and W. Donghui, “Effects of metal buffer layer for amorphous carbon film of 304 stainless steel bipolar plate,” Thin Solid Films, vol. 616, pp. 507–514, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Ge, S. Ji, and D. Tan, “A gas-liquid-solid three-phase abrasive flow processing method based on bubble collapsing,” The International Journal of Advanced Manufacturing Technology, pp. 1–17, 2017. View at Publisher · View at Google Scholar
  25. H. Zhan, F. Xu, and Z. Ni, “Fluid dynamic modeling and fuzzy proportional–integral–derivative–based ink-supply method for piezoelectric ink-jet printing,” Advances in Mechanical Engineering, vol. 9, no. 7, pp. 1–7, 2017. View at Publisher · View at Google Scholar
  26. C. Li, S.-M. Ji, and D.-P. Tan, “Multiple-loop digital control method for a 400-hz inverter system based on phase feedback,” IEEE Transactions on Power Electronics, vol. 28, no. 1, pp. 408–417, 2013. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Li, D. Tan, D. Wen, S. Ji, and D. Cai, “Parameters optimization of a novel 5-DOF gasbag polishing machine tool,” Chinese Journal of Mechanical Engineering, vol. 26, no. 4, pp. 680–688, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. D.-P. Tan, S.-M. Ji, and M.-S. Jin, “Intelligent computer-aided instruction modeling and a method to optimize study strategies for parallel robot instruction,” IEEE Transactions on Education, vol. 56, no. 3, pp. 268–273, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. J. Li, S.-M. Ji, and D.-P. Tan, “Improved soft abrasive flow finishing method based on turbulent kinetic energy enhancing,” Chinese Journal of Mechanical Engineering, vol. 30, no. 2, pp. 301–309, 2017. View at Google Scholar
  30. D.-P. Tan, S.-M. Ji, and Y.-Z. Fu, “An improved soft abrasive flow finishing method based on fluid collision theory,” The International Journal of Advanced Manufacturing Technology, vol. 85, no. 5-8, pp. 1261–1274, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. S.-M. Ji, J.-Q. Ge, and D.-P. Tan, “Wall contact effects of particle-wall collision process in two-phase particle fluid,” Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017. View at Publisher · View at Google Scholar
  32. D.-P. TAN, P.-Y. LI, and X.-H. PAN, “Application of Improved HMM Algorithm in Slag Detection System,” Journal of Iron and Steel Research, International, vol. 16, no. 1, pp. 1–6, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. C. Li, S.-M. Ji, and D.-P. Tan, “Study on machinability and the wall region of solid-liquid two phase softness abrasive flow,” International Journal of Advanced Manufacturing Technology, vol. 61, no. 9-12, pp. 975–987, 2012. View at Google Scholar
  34. S.-M. Ji, X.-X. Weng, and D.-P. Tan, “Analytical method of softness abrasive two-phase flow field based on 2D model of LSM,” ACTA Physica Sinica, vol. 61, no. 1, Article ID 010205, 2012. View at Google Scholar
  35. R. Sivashanmugam and S. Arumugam, “Robust Adaptive algorithm by an adaptive zero attractor controller of ZA-LMS algorithm,” Mathematical Problems in Engineering, vol. 2016, Article ID 3945895, 7 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  36. S.-T. Chen and D.-P. Tan, “A SA-ANN-based modeling method for human cognition mechanism and the PSACO cognition algorithm,” Complexity, In Press.
  37. N. Zheng, L. Su, D. Zhang, L. Gao, M. Yao, and Z. Wu, “A computational model for ratbot locomotion based on cyborg intelligence,” Neurocomputing, vol. 170, pp. 92–97, 2015. View at Publisher · View at Google Scholar · View at Scopus
  38. D. Tan, P. Li, and X. Pan, “Intelligent industry monitoring network architecture UPnP based,” Journal of Electronics, vol. 17, no. 4, pp. 607–610, 2008. View at Google Scholar · View at Scopus
  39. D. Tan, L. Zhang, and Q. Ai, “An embedded self-adapting network service framework for networked manufacturing system,” Journal of Intelligent Manufacturing, pp. 1–18, 2016. View at Publisher · View at Google Scholar · View at Scopus
  40. X. Zeng, S.-M. Ji, M.-S. Jin, D.-P. Tan, and J.-Q. Ge, “Research on dynamic characteristic of softness consolidation abrasives in machining process,” The International Journal of Advanced Manufacturing Technology, vol. 82, no. 5-8, pp. 1115–1125, 2016. View at Publisher · View at Google Scholar · View at Scopus
  41. I. Herrera-Leandro, P. Moreno-Villalobos, S. Ortega-Cisneros, J. Rivera, and F. Sandoval-Ibarra, “Implementation of SoC Based Real-Time Electromagnetic Transient Simulator,” Mathematical Problems in Engineering, vol. 2017, Article ID 5274517, 2017. View at Publisher · View at Google Scholar · View at Scopus
  42. S. Ji, F. Xiao, and D. Tan, “Analytical method for softness abrasive flow field based on discrete phase model,” Science China Technological Sciences, vol. 53, no. 10, pp. 2867–2877, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. D.-P. Tan, P.-Y. Li, Y.-X. Ji, D.-H. Wen, and C. Li, “SA-ANN-based slag carry-over detection method and the embedded WME platform,” IEEE Transactions on Industrial Electronics, vol. 60, no. 10, pp. 4702–4713, 2013. View at Publisher · View at Google Scholar · View at Scopus
  44. N. Zheng, M. Jin, H. Hong, L. Huang, Z. Gu, and H. Li, “Real-time and precise insect flight control system based on virtual reality,” IEEE Electronics Letters, vol. 53, no. 6, pp. 387–389, 2017. View at Publisher · View at Google Scholar · View at Scopus
  45. Z. Wu, N. Zheng, S. Zhang, X. Zheng, L. Gao, and L. Su, “Maze learning by a hybrid brain-computer system,” Scientific Reports, vol. 6, no. 1, 2016. View at Publisher · View at Google Scholar