Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017 (2017), Article ID 5853423, 17 pages
https://doi.org/10.1155/2017/5853423
Research Article

Decoupling Control for Dual-Winding Bearingless Switched Reluctance Motor Based on Improved Inverse System Method

1School of Electric Power Engineering, Nanjing Institute of Technology, Nanjing 211167, China
2School of Electrical and Information Engineering, Jiangsu University, Zhenjiang 212013, China

Correspondence should be addressed to Zhiying Zhu; nc.ude.tijn@uhzyz

Received 12 October 2016; Revised 4 January 2017; Accepted 11 January 2017; Published 16 February 2017

Academic Editor: Luis J. Yebra

Copyright © 2017 Zhiying Zhu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D.-H. Lee, T. H. Pham, and J.-W. Ahn, “Design and operation characteristics of four-two pole high-speed SRM for torque ripple reduction,” IEEE Transactions on Industrial Electronics, vol. 60, no. 9, pp. 3637–3643, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. S.-M. Yang and J.-Y. Chen, “Controlled dynamic braking for switched reluctance motor drives with a rectifier front end,” IEEE Transactions on Industrial Electronics, vol. 60, no. 11, pp. 4913–4919, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. H.-Y. Yang, Y.-C. Lim, and H.-C. Kim, “Acoustic noise/vibration reduction of a single-phase SRM using skewed stator and rotor,” IEEE Transactions on Industrial Electronics, vol. 60, no. 10, pp. 4292–4300, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. F. L. M. dos Santos, J. Anthonis, F. Naclerio, J. J. C. Gyselinck, H. Van der Auweraer, and L. C. S. Góes, “Multiphysics NVH modeling: simulation of a switched reluctance motor for an electric vehicle,” IEEE Transactions on Industrial Electronics, vol. 61, no. 1, pp. 469–476, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. B. B. Choi and M. Siebert, “A bearingless switched reluctance motor for high specific power applications,” in Proceedings of the 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Sacramento, Calif, USA, July 2006.
  6. M. Takemoto, K. Shimada, and A. Chiba, “A design and characteristics of switched reluctance type bearingless motors,” in Proceedings of the 4th International Symposium on Magnetic Suspension Technology, pp. 49–63, 1998.
  7. F.-C. Lin and S.-M. Yang, “An approach to producing controlled radial force in a switched reluctance motor,” IEEE Transactions on Industrial Electronics, vol. 54, no. 4, pp. 2137–2146, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. L. Chen and W. Hofmann, “Speed regulation technique of one bearingless 8/6 switched reluctance motor with simpler single winding structure,” IEEE Transactions on Industrial Electronics, vol. 59, no. 6, pp. 2592–2600, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. C. R. Morrison, M. W. Siebert, and E. J. Ho, “Electromagnetic forces in a hybrid magnetic-bearing switched-reluctance motor,” IEEE Transactions on Magnetics, vol. 44, no. 12, pp. 4626–4638, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. Z. Xu, D. H. Lee, and J. W. Ahn, “Control characteristics of 8/10 and 12/14 bearingless switched reluctance motor,” in Proceedings of the International Power Electronics Conference, pp. 994–999, Hiroshima, Japan, October 2014.
  11. W. Peng, F. Zhang, and J.-W. Ahn, “Design and control of a novel bearingless SRM with double stator,” in Proceedings of the 21st IEEE International Symposium on Industrial Electronics (ISIE '12), pp. 1928–1933, IEEE, Hangzhou, China, May 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Wang, J. Liu, J. Bao, and B. Xue, “A novel bearingless switched reluctance motor with biased permanent magnet,” IEEE Transactions on Industrial Electronics, vol. 61, no. 12, pp. 6947–6955, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Wang, J. Bao, B. Xue, and J. Liu, “Control of suspending force in novel permanent-magnet-biased bearingless switched reluctance motor,” IEEE Transactions on Industrial Electronics, vol. 62, no. 7, pp. 4298–4306, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Takemoto, A. Chiba, and T. Fukao, “A new control method of bearingless switched reluctance motors using square-wave currents,” in Proceedings of the IEEE Power Engineering Society Winter Meeting, vol. 1, pp. 375–380, Singapore, June 2000. View at Publisher · View at Google Scholar
  15. M. Takemoto, A. Chiba, and T. Fukao, “A method of determining the advanced angle of square-wave currents in a bearingless switched reluctance motor,” IEEE Transactions on Industry Applications, vol. 37, no. 6, pp. 1702–1709, 2001. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Takemoto, A. Chiba, H. Akagi, and T. Fukao, “Radial force and torque of a bearingless switched reluctance motor operating in a region of magnetic saturation,” IEEE Transactions on Industry Applications, vol. 40, no. 1, pp. 103–112, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Takemoto, H. Suzuki, A. Chiba, T. Fukao, and M. A. Rahman, “Improved analysis of a bearingless switched reluctance motor,” IEEE Transactions on Industry Applications, vol. 37, no. 1, pp. 26–34, 2001. View at Publisher · View at Google Scholar
  18. X. Cao, Z. Deng, G. Yang, and X. Wang, “Independent control of average torque and radial force in bearingless switched-reluctance motors with hybrid excitations,” IEEE Transactions on Power Electronics, vol. 24, no. 5, pp. 1376–1385, 2009. View at Publisher · View at Google Scholar
  19. Y. Yang, Z. Deng, G. Yang, X. Cao, and Q. Zhang, “A control strategy for bearingless switched-reluctance motors,” IEEE Transactions on Power Electronics, vol. 25, no. 11, pp. 2807–2819, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. L. Zhang and Y.-K. Sun, “Variable-structure control of bearingless switched reluctance motors based on differential geometry,” Proceedings of the Chinese Society of Electrical Engineering, vol. 26, no. 19, pp. 121–126, 2006 (Chinese). View at Google Scholar · View at Scopus
  21. Y. Ren and J. Fang, “High-precision and strong-robustness control for an MSCMG based on modal separation and rotation motion decoupling strategy,” IEEE Transactions on Industrial Electronics, vol. 61, no. 3, pp. 1539–1551, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Wu, Y. Sun, X. Liu, L. Zhang, G. Liu, and J. Chen, “Decoupling control of radial force in bearingless switched reluctance motors based on inverse system,” in Proceedings of the 6th World Congress on Intelligent Control and Automation (WCICA '06), pp. 1100–1104, June 2006. View at Publisher · View at Google Scholar · View at Scopus
  23. Z. Zhu and Y. Sun, “Modified inverse decoupling control for bearingless switched reluctance motors operating in irreversible domain,” in Proceedings of the 17th International Conference on Electrical Machines and Systems (ICEMS '14), pp. 1245–1250, IEEE, Hangzhou, China, October 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Sun, Y. Zhou, and X. Ji, “Decoupling control of bearingless switched reluctance motor with neural network inverse system method,” Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, vol. 31, no. 30, pp. 117–123, 2011. View at Google Scholar · View at Scopus
  25. Y. Zhou, Y. Sun, and Y. Huang, “Full decoupling control of bearingless switched reluctance motor based on support vector machine inverse system,” Journal of Jiangsu University (Natural Science Edition), vol. 33, no. 1, pp. 60–64, 2012 (Chinese). View at Publisher · View at Google Scholar · View at Scopus
  26. J. Fang and Y. Ren, “Decoupling control of magnetically suspended rotor system in control moment gyros based on an inverse system method,” IEEE/ASME Transactions on Mechatronics, vol. 17, no. 6, pp. 1133–1144, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. J. Fang and Y. Ren, “High-precision control for a single-gimbal magnetically suspended control moment gyro based on inverse system method,” IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 4331–4342, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. X. Dai, D. He, X. Zhang, and T. Zhang, “MIMO system invertibility and decoupling control strategies based on ANN αth-order inversion,” IEE Proceedings: Control Theory and Applications, vol. 148, no. 2, pp. 125–136, 2001. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Ren and J. Fang, “Current-sensing resistor design to include current derivative in PWM H-bridge unipolar switching power amplifiers for magnetic bearings,” IEEE Transactions on Industrial Electronics, vol. 59, no. 12, pp. 4590–4600, 2012. View at Publisher · View at Google Scholar · View at Scopus