Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017, Article ID 7237486, 15 pages
https://doi.org/10.1155/2017/7237486
Research Article

Assessment of the Adequacy of Gauge Repeatability and Reproducibility Study Using a Monte Carlo Simulation

1School of Information & Computer Engineering, Hongik University, 94 Wausan-ro, Mapo-gu, Seoul 04066, Republic of Korea
2School of Mechanical, Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR 97330, USA
3Department of Industrial and Management Engineering, Myongji University, 116 Myonggi-Ro, Cheoin-Gu, Yongin-Si, Gyeonggi-Do 449-728, Republic of Korea

Correspondence should be addressed to SeJoon Park; ten.liamnah@jspumnos

Received 7 March 2017; Accepted 20 June 2017; Published 15 August 2017

Academic Editor: J.-C. Cortés

Copyright © 2017 Chunghun Ha et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Chunghun Ha, David S. Kim, and SeJoon Park, “Assessment of the Adequacy of Gauge Repeatability and Reproducibility Study Using a Monte Carlo Simulation,” Mathematical Problems in Engineering, vol. 2017, Article ID 7237486, 15 pages, 2017. https://doi.org/10.1155/2017/7237486.