Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017, Article ID 7834621, 11 pages
https://doi.org/10.1155/2017/7834621
Research Article

Bending Angle Prediction Model Based on BPNN-Spline in Air Bending Springback Process

Department of Mechanical Engineering, Southeast University, Nanjing 211189, China

Correspondence should be addressed to Wencheng Tang; nc.ude.ues@cwgnat

Received 16 October 2016; Revised 16 January 2017; Accepted 7 February 2017; Published 27 February 2017

Academic Editor: Marek Lefik

Copyright © 2017 Zhefeng Guo and Wencheng Tang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Zhefeng Guo and Wencheng Tang, “Bending Angle Prediction Model Based on BPNN-Spline in Air Bending Springback Process,” Mathematical Problems in Engineering, vol. 2017, Article ID 7834621, 11 pages, 2017. https://doi.org/10.1155/2017/7834621.