Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017, Article ID 7898369, 15 pages
https://doi.org/10.1155/2017/7898369
Research Article

Milling Stability Prediction with Multiple Delays via the Extended Adams-Moulton-Based Method

State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Correspondence should be addressed to Jianfeng Tao; nc.ude.utjs@oatfj

Received 16 February 2017; Revised 27 March 2017; Accepted 29 March 2017; Published 7 May 2017

Academic Editor: Oleg V. Gendelman

Copyright © 2017 Jianfeng Tao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Altıntaş, G. Stepan, D. Merdol, and Z. Dombovari, “Chatter stability of milling in frequency and discrete time domain,” CIRP Journal of Manufacturing Science and Technology, vol. 1, no. 1, pp. 35–44, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Ding, Y. Ding, and L. Zhu, “On time-domain methods for milling stability analysis,” Chinese Science Bulletin, vol. 57, no. 33, pp. 4336–4345, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Munoa, X. Beudaert, Z. Dombovari et al., “Chatter suppression techniques in metal cutting,” CIRP Annals—Manufacturing Technology, vol. 65, no. 2, pp. 785–808, 2016. View at Publisher · View at Google Scholar
  4. M. Wiercigroch and E. Budak, “Sources of nonlinearities, chatter generation and suppression in metal cutting,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 359, no. 1781, pp. 663–693, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Altıntaş and M. Weck, “Chatter stability of metal cutting and grinding,” CIRP Annals—Manufacturing Technology, vol. 53, no. 2, pp. 619–642, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. T. Insperger and G. Stepan, Semi-Discretization for Time-Delay Systems: Stability and Engineering Applications, vol. 178 of Applied Mathematical Sciences, Springer, New York, NY, USA, 2011. View at Publisher · View at Google Scholar · View at MathSciNet
  7. M. A. Davies, J. R. Pratt, B. S. Dutterer, and T. J. Burns, “Stability of low radial immersion milling,” CIRP Annals—Manufacturing Technology, vol. 49, no. 1, pp. 37–40, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. M. L. Campomanes and Y. Altıntaş, “An improved time domain simulation for dynamic milling at small radial immersions,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 125, no. 3, pp. 416–422, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. Li and Q. Liu, “Solution and analysis of chatter stability for end milling in the time-domain,” Chinese Journal of Aeronautics, vol. 21, no. 2, pp. 169–178, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Urbikain, D. Olvera, and L. N. L. de Lacalle, “Stability contour maps with barrel cutters considering the tool orientation,” The International Journal of Advanced Manufacturing Technology, vol. 89, no. 9, pp. 2491–2501, 2017. View at Publisher · View at Google Scholar
  11. Y. Altıntaş and E. Budak, “Analytical prediction of stability lobes in milling,” CIRP Annals—Manufacturing Technology, vol. 44, no. 1, pp. 357–362, 1995. View at Publisher · View at Google Scholar · View at Scopus
  12. E. Budak and Y. Altıntaş, “Analytical prediction of chatter stability in milling—part II: application of the general formulation to common milling systems,” Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, vol. 120, no. 1, pp. 31–36, 1998. View at Publisher · View at Google Scholar · View at Scopus
  13. S. D. Merdol and Y. Altıntaş, “Multi frequency solution of chatter stability for low immersion milling,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 126, no. 3, pp. 459–466, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. P. V. Bayly, B. P. Mann, T. L. Schmitz, D. A. Peters, G. Stepan, and T. Insperger, “Effects of radial immersion and cutting direction on chatter instability in end-milling,” in Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper No. IMECE2002-39116, pp. 351–363, New Orleans, Louisiana, La, USA, November, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. E. A. Butcher, O. A. Bobrenkov, E. Bueler, and P. Nindujarla, “Analysis of milling stability by the chebyshev collocation method: algorithm and optimal stable immersion levels,” Journal of Computational and Nonlinear Dynamics, vol. 4, no. 3, Article ID 031003, 12 pages, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Urbikain, L. N. López de Lacalle, F. J. Campa, A. Fernández, and A. Elías, “Stability prediction in straight turning of a flexible workpiece by collocation method,” International Journal of Machine Tools and Manufacture, vol. 54-55, pp. 73–81, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Urbikain, A. Fernández, L. N. López de Lacalle, and M. E. Gutiérrez, “Stability lobes for general turning operations with slender tools in the tangential direction,” International Journal of Machine Tools and Manufacture, vol. 67, pp. 35–44, 2013. View at Publisher · View at Google Scholar
  18. G. Urbikain, F.-J. Campa, J.-J. Zulaika, L.-N. López De Lacalle, M.-A. Alonso, and V. Collado, “Preventing chatter vibrations in heavy-duty turning operations in large horizontal lathes,” Journal of Sound and Vibration, vol. 340, pp. 317–330, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Urbikain, D. Olvera, L. N. L. de Lacalle, and A. Elías-Zúñiga, “Stability and vibrational behaviour in turning processes with low rotational speeds,” International Journal of Advanced Manufacturing Technology, vol. 80, no. 5–8, pp. 871–885, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Insperger and G. St\'ep\'an, “Semi-discretization method for delayed systems,” International Journal for Numerical Methods in Engineering, vol. 55, no. 5, pp. 503–518, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  21. T. Insperger and G. St\'ep\'an, “Updated semi-discretization method for periodic delay-differential equations with discrete delay,” International Journal for Numerical Methods in Engineering, vol. 61, no. 1, pp. 117–141, 2004. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  22. T. Insperger, G. Stépán, and J. Turi, “On the higher-order semi-discretizations for periodic delayed systems,” Journal of Sound and Vibration, vol. 313, no. 1-2, pp. 334–341, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. S. L. Jiang, Y. W. Sun, X. L. Yuan, and W. R. Liu, “A second-order semi-discretization method for the efficient and accurate stability prediction of milling process,” The International Journal of Advanced Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  24. Y. Ding, L. Zhu, X. Zhang, and H. Ding, “A full-discretization method for prediction of milling stability,” International Journal of Machine Tools and Manufacture, vol. 50, no. 5, pp. 502–509, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. Ding, L. Zhu, X. Zhang, and H. Ding, “Second-order full-discretization method for milling stability prediction,” International Journal of Machine Tools and Manufacture, vol. 50, no. 10, pp. 926–932, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. Q. Quo, Y. Sun, and Y. Jiang, “On the accurate calculation of milling stability limits using third-order full-discretization method,” International Journal of Machine Tools and Manufacture, vol. 62, pp. 61–66, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. C. G. Ozoegwu, S. N. Omenyi, and S. M. Ofochebe, “Hyper-third order full-discretization methods in milling stability prediction,” International Journal of Machine Tools and Manufacture, vol. 92, pp. 1–9, 2015. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Ding, L. Zhu, X. Zhang, and H. Ding, “Numerical integration method for prediction of milling stability,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 133, no. 3, Article ID 031005, 9 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Ding, J. Niu, L. Zhu, and H. Ding, “Numerical integration method for stability analysis of milling with variable spindle speeds,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 138, no. 1, Article ID 011010, 11 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  30. J. Niu, Y. Ding, L. Zhu, and H. Ding, “Stability Analysis of Milling Processes with Periodic Spindle Speed Variation Via the Variable-Step Numerical Integration Method,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 138, no. 11, Article ID 114501, 11 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Li, G. Zhang, and Y. Huang, “Complete discretization scheme for milling stability prediction,” Nonlinear Dynamics, vol. 71, no. 1-2, pp. 187–199, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  32. Q. Xie, “Milling stability prediction using an improved complete discretization method,” International Journal of Advanced Manufacturing Technology, vol. 83, no. 5–8, pp. 815–821, 2016. View at Publisher · View at Google Scholar · View at Scopus
  33. Z. Li, Z. Yang, Y. Peng, F. Zhu, and X. Ming, “Prediction of chatter stability for milling process using Runge-Kutta-based complete discretization method,” International Journal of Advanced Manufacturing Technology, vol. 86, no. 1–4, pp. 943–952, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. Y. Ding, L. M. Zhu, X. J. Zhang, and H. Ding, “Stability analysis of milling via the differential quadrature method,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 135, no. 4, Article ID 044502, 7 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  35. D. Olvera, A. Elías-Zúñiga, H. Martínez-Alfaro, L. N. López De Lacalle, C. A. Rodríguez, and F. J. Campa, “Determination of the stability lobes in milling operations based on homotopy and simulated annealing techniques,” Mechatronics, vol. 24, no. 3, pp. 177–185, 2014. View at Publisher · View at Google Scholar · View at Scopus
  36. J. Niu, Y. Ding, L. Zhu, and H. Ding, “Runge-Kutta methods for a semi-analytical prediction of milling stability,” Nonlinear Dynamics, vol. 76, no. 1, pp. 289–304, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  37. Y. Ding, L. Zhu, and H. Ding, “A wavelet-based approach for stability analysis of periodic delay-differential systems with discrete delay,” Nonlinear Dynamics, vol. 79, no. 2, pp. 1049–1059, 2015. View at Publisher · View at Google Scholar · View at MathSciNet
  38. Z. Zhang, H. G. Li, G. Meng, and C. Liu, “A novel approach for the prediction of the milling stability based on the Simpson method,” International Journal of Machine Tools and Manufacture, vol. 99, pp. 43–47, 2015. View at Publisher · View at Google Scholar · View at Scopus
  39. X. Zhang, C. Xiong, Y. Ding, and H. Ding, “Prediction of chatter stability in high speed milling using the numerical differentiation method,” International Journal of Advanced Manufacturing Technology, vol. 89, no. 9, pp. 2535–2544, 2017. View at Publisher · View at Google Scholar · View at Scopus
  40. C. Qin, J. Tao, L. Li, and C. Liu, “An Adams-Moulton-based method for stability prediction of milling processes,” International Journal of Advanced Manufacturing Technology, vol. 89, no. 9, pp. 3049–3058, 2017. View at Publisher · View at Google Scholar · View at Scopus
  41. Y. Altıntaş, S. Engin, and E. Budak, “Analytical stability prediction and design of variable pitch cutters,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 121, no. 2, pp. 173–178, 1999. View at Publisher · View at Google Scholar · View at Scopus
  42. E. Budak, “An analytical design method for milling cutters with nonconstant pitch to increase stability, part I: theory,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 125, no. 1, pp. 29–34, 2003. View at Publisher · View at Google Scholar · View at Scopus
  43. E. Budak, “An analytical design method for milling cutters with nonconstant pitch to increase stability, part 2: application,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 125, no. 1, pp. 35–38, 2003. View at Publisher · View at Google Scholar · View at Scopus
  44. N. Olgac and R. Sipahi, “Dynamics and stability of variable-pitch milling,” JVC/Journal of Vibration and Control, vol. 13, no. 7, pp. 1031–1043, 2007. View at Publisher · View at Google Scholar · View at Scopus
  45. N. D. Sims, B. Mann, and S. Huyanan, “Analytical prediction of chatter stability for variable pitch and variable helix milling tools,” Journal of Sound and Vibration, vol. 317, no. 3–5, pp. 664–686, 2008. View at Publisher · View at Google Scholar · View at Scopus
  46. M. Wan, W.-H. Zhang, J.-W. Dang, and Y. Yang, “A unified stability prediction method for milling process with multiple delays,” International Journal of Machine Tools and Manufacture, vol. 50, no. 1, pp. 29–41, 2010. View at Publisher · View at Google Scholar · View at Scopus
  47. X. Zhang, C. H. Xiong, and Y. Ding, “Improved full-discretization method for milling chatter stability prediction with multiple delays,” in Intelligent Robotics and Applications, vol. 6425, pp. 541–552, Springer, Heidelberg, Germany, 2010. View at Publisher · View at Google Scholar · View at Scopus
  48. X. Zhang, C. Xiong, Y. Ding, and Y. Xiong, “Variable-step integration method for milling chatter stability prediction with multiple delays,” Science China Technological Sciences, vol. 54, no. 12, pp. 3137–3154, 2011. View at Publisher · View at Google Scholar · View at Scopus
  49. F. I. Compeán, D. Olvera, F. J. Campa, L. N. López De Lacalle, A. Elías-Zúñiga, and C. A. Rodríguez, “Characterization and stability analysis of a multivariable milling tool by the enhanced multistage homotopy perturbation method,” International Journal of Machine Tools and Manufacture, vol. 57, pp. 27–33, 2012. View at Publisher · View at Google Scholar · View at Scopus
  50. F. A. Khasawneh and B. P. Mann, “A spectral element approach for the stability analysis of time-periodic delay equations with multiple delays,” Communications in Nonlinear Science and Numerical Simulation, vol. 18, no. 8, pp. 2129–2141, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  51. G. Jin, Q. Zhang, S. Hao, and Q. Xie, “Stability prediction of milling process with variable pitch cutter,” Mathematical Problems in Engineering, vol. 2013, Article ID 932013, 11 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  52. G. Jin, Q. Zhang, S. Hao, and Q. Xie, “Stability prediction of milling process with variable pitch and variable helix cutters,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 228, no. 2, pp. 281–293, 2014. View at Publisher · View at Google Scholar · View at Scopus
  53. G. Jin, H. Qi, Y. Cai, and Q. Zhang, “Stability prediction for milling process with multiple delays using an improved semi-discretization method,” Mathematical Methods in the Applied Sciences, vol. 39, no. 4, pp. 949–958, 2016. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  54. N. D. Sims, “Fast chatter stability prediction for variable helix milling tools,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 230, no. 1, pp. 133–144, 2016. View at Publisher · View at Google Scholar · View at Scopus
  55. Y. Ding, J. B. Niu, L. M. Zhu, and H. Ding, “Differential quadrature method for stability analysis of dynamic systems with multiple delays: application to simultaneous machining operations,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 137, no. 2, Article ID 024501, 8 pages, 2015. View at Publisher · View at Google Scholar
  56. Q. Guo, Y. Jiang, B. Zhao, and P. Ming, “Chatter modeling and stability lobes predicting for non-uniform helix tools,” International Journal of Advanced Manufacturing Technology, vol. 87, no. 1, pp. 251–266, 2016. View at Publisher · View at Google Scholar · View at Scopus