Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017, Article ID 8524078, 23 pages
https://doi.org/10.1155/2017/8524078
Research Article

Design Analysis and Observed Performance of a Tieback Anchored Pile Wall in Sand

1School of Resource & Civil Engineering, Northeastern University, Shenyang 110819, China
2China Railway Design Corporation, Tianjin 300142, China

Correspondence should be addressed to Wen Zhao; moc.361@uennew

Received 17 July 2017; Accepted 29 November 2017; Published 27 December 2017

Academic Editor: Yakov Strelniker

Copyright © 2017 Jian-Yong Han et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Adekunte, D. Madsen, N. Margetson, and L. Quinn, “Predicted and observed performance of an anchored retaining wall in granite,” in Ground Anchorages and Anchored Structures in Service 2007: Proceedings of the Two Day International Conference Organised by the Institution of Civil Engineers, pp. 427–437, Thomas Telford Publishing, London, UK, November 2007.
  2. C. Veder, Excavation of Trenches in the Presence of Bentonite Suspension for the Construction of Impermeable and Load-Bearing Diaphragms. Grouts and Drilling Muds in Engineering Practice, Butterworths, London, UK, 1963.
  3. J.-L. Briaud and Y. Lim, “Tieback walls in sand: Numerical simulation and design implications,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 125, no. 2, pp. 101–110, 1999. View at Publisher · View at Google Scholar · View at Scopus
  4. P. C. Lambe and L. A. Hansen, Design and Performance of Earth Retaining Structures. American Society of Civil Engineers Geotechnical Publication No. 25, 1990.
  5. D. E. Weatherby, “Behavior of tiedback, h-beam walls and recommendations for their design,” in Proceedings of the 2010 Earth Retention Conference - Earth Retention Conference 3, pp. 170–187, USA, August 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Khoshnevisan, L. Wang, and C. H. Juang, “Response surface-based robust geotechnical design of supported excavation–spreadsheet-based solution,” Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, vol. 11, no. 1, pp. 90–102, 2017. View at Publisher · View at Google Scholar · View at Scopus
  7. R. B. Peck, “Deep excavation & tunneling in soft ground. Stateof-the-art-report,” in Proceedings of the 7th International Conference of Soil Mechanics and Foundation Engineering, International Society for Soil Mechanics and Geotechnical Engineering, pp. 225–281, Mexico, 1969.
  8. T. D. O'Rourke, “Ground movements caused by braced excavations,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 107, no. 9, pp. 1159–1178, 1981. View at Google Scholar · View at Scopus
  9. R. J. Finno, D. K. Atmatzidis, and S. B. Perkins, “Observed performance of a deep excavation in clay,” Journal of Geotechnical Engineering, vol. 115, no. 8, pp. 1045–1064, 1989. View at Publisher · View at Google Scholar · View at Scopus
  10. C.-Y. Ou, J.-T. Liao, and H.-D. Lin, “Performance of diaphragm wall constructed using top-down method,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 124, no. 9, pp. 798–808, 1998. View at Publisher · View at Google Scholar · View at Scopus
  11. R. J. Finno, J. T. Blackburn, and J. F. Roboski, “Three-dimensional effects for supported excavations in clay,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 133, no. 1, pp. 30–36, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Tan and B. Wei, “Observed behaviors of a long and deep excavation constructed by cut-and-cover technique in Shanghai soft clay,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 138, no. 1, pp. 69–88, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. D. H. Seo, B. S. Chang, S. S. Jeong, and S. I. Kim, “Evaluation of the sequential behavior of tieback wall in sand by small scale model tests,” Journal of the Korean Geotechnical Society, vol. 15, no. 3, pp. 113–129, 1999. View at Google Scholar
  14. R. J. Finno and J. F. Roboski, “Three-dimensional responses of a tied-back excavation through clay,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 131, no. 3, pp. 273–282, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Roboski and R. J. Finno, “Distributions of ground movements parallel to deep excavations in clay,” Canadian Geotechnical Journal, vol. 43, no. 1, pp. 43–58, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. J. F. Roboski, Three-Dimensional Performance And Analyses of Deep Excavations [M.S. thesis], Northwestern University, 2004.
  17. K. Terzaghi, Theoretical Soil Mechanics, John Wiley & Sons, New York, NY, USA, 1943. View at Publisher · View at Google Scholar
  18. D. W. Taylor, Fundamentals of Soil Mechanics, John Wiley & Sons, New York, NY, USA, 1948. View at Publisher · View at Google Scholar
  19. J. Brinch Hansen, “Earth Pressure Calculations,” Tech. Rep., The Danish Technical Press, Copenhagen, Denmark, 1953. View at Google Scholar
  20. J. Brinch Hansen, “Limit design and safety factors in soil mechanics,” Limit Design and Safety Factors in Soil Mechanics. Danish Geotechnical Institute, Copenhagen, Bulletin No. 1, 1956. View at Google Scholar
  21. B. Simpson, “Partial factors: where to apply them,” in Proceedings of the LSD 2000: International Workshop on Limit State Design in Geotechnical Engineering, pp. 125–136, 2000.
  22. T. L. L. Orr, “Selection of characteristic values and partial factors in geotechnical designs to Eurocode 7,” Computers & Geosciences, vol. 26, no. 3-4, pp. 263–279, 2000. View at Publisher · View at Google Scholar · View at Scopus
  23. D. E. Becker, “Eighteenth Canadian geotechnical colloquium: Limit states design for foundations. Part I. An overview of the foundation design process,” Canadian Geotechnical Journal, vol. 33, no. 6, pp. 956–983, 1996. View at Publisher · View at Google Scholar · View at Scopus
  24. Y.-S. Li, X. Duan, Y. Li, and X.-P. Li, “Comparative research on design approaches on retaining structure for deep foundation pits in Chinese and European geotechnical design codes,” Chinese Journal of Geotechnical Engineering, vol. 36, pp. 77–81, 2014 (Chinese). View at Publisher · View at Google Scholar · View at Scopus
  25. N.-K. Kim, “Performance of tension and compression anchors in weathered soil,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 129, no. 12, pp. 1138–1150, 2003. View at Publisher · View at Google Scholar · View at Scopus
  26. D. C. Konstantakos, “Online database of deep excavation performance and prediction,” in 6th International Conference on Case Histories in Geotechnical Engineering, 2008.
  27. T. Tamano, H. Q. Nguyen, M. Kanaoka, Y. Fuseya, and W. Tonosaki, “Field Tests and Numerical Investigation of Splits Anchors in Structured Clay,” 2006.
  28. N. Uǧur Terzi, G. I. Daldal, and S. Yildirim, “Monitoring a grouted anchor in a reinforced structure,” Experimental Techniques, vol. 35, no. 2, pp. 47–54, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. S.-T. Hsu, “Behavior of pressure-grouted anchors in gravel,” Canadian Geotechnical Journal, vol. 49, no. 6, pp. 719–728, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. S. G. Li, J. Y. Han, J. J. Shi, and W. Zhao, “Field test on steel pipe jacking by STS method,” Journal of Northeastern University (Natural Science), vol. 37, no. 10, pp. 1469–1473, 2016 (Chinese). View at Google Scholar
  31. NBS, Technical specification for retaining and protection of building foundation excavations. JGJ 120-2012. National Bureau of Standards of China (NBS), Beijing, China; 2012, (in Chinese).
  32. W.-M. Xu and Y.-M. Tu, “Landslide analysis and reinforcement design of the pit-in-pit,” Rock and Soil Mechanics, vol. 31, no. 5, pp. 1555–1563, 2010 (Chinese). View at Google Scholar · View at Scopus
  33. J. H. Liu and X. Y. Hou, Excavation Engineering Manual, 1997 (Chinese).
  34. X. N. Gong, Deep Excavation Engineering Design And Construction Manual, 1998 (Chinese).
  35. M. Khoiri and C.-Y. Ou, “Evaluation of deformation parameter for deep excavation in sand through case histories,” Computers & Geosciences, vol. 47, pp. 57–67, 2013. View at Publisher · View at Google Scholar · View at Scopus
  36. T. Schanz, P. A. Vermeer, and P. G. Bonnier, “The hardening soil model: Formulation and verification,” Beyond 2000 in computational geotechnics, pp. 281–296, 1999. View at Google Scholar · View at Scopus
  37. R. B. J. Brinkgreve, E. Engin, W. M. Swolfs et al., PLAXIS 3D, 2010, Plaxis Company, Delft, Netherlands, 2010.
  38. M. Khoiri, C.-Y. Ou, and F.-C. Teng, “A comprehensive evaluation of strength and modulus parameters of a gravelly cobble deposit for deep excavation analysis,” Engineering Geology, vol. 174, no. 8, pp. 61–72, 2014. View at Publisher · View at Google Scholar · View at Scopus
  39. J. M. Duncan and C. Y. Chang, “Nonlinear analysis of stress and strain in soils,” Journal of the Soil Mechanics and Foundations Division, 1970. View at Google Scholar
  40. J. E. Bowles, Foundation Analysis and Design, McGraw-Hill Company, New York, NY, USA, 4th edition, 1988.
  41. D. G. Fredlund and J. Krahn, “Comparison of slope stability methods of analysis,” Canadian Geotechnical Journal, vol. 14, no. 3, pp. 429–439, 1977. View at Publisher · View at Google Scholar · View at Scopus
  42. G. W. Clough and L. A. Hansen, “Clay anisotropy and braced wall behavior,” Journal of the Geotechnical Engineering Division, vol. 107, no. 7, pp. 893–913, 1981. View at Google Scholar · View at Scopus
  43. B. Ukritchon, A. J. Whittle, and S. W. Sloan, “Undrained stability of braced excavations in clay,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 129, no. 8, pp. 738–755, 2003. View at Publisher · View at Google Scholar · View at Scopus
  44. K. Terzaghi, R. B. Peck, and G. Mesri, Soil Mechanics in Engineering Practice, John Wiley & Sons, 1996.
  45. Z. Gang, Deep Foundation Pit Engineering Design Theory and Engineering Application, 2010 (Chinese).
  46. H. Faheem, F. Cai, K. Ugai, and T. Hagiwara, “Two-dimensional base stability of excavations in soft soils using FEM,” Computers & Geosciences, vol. 30, no. 2, pp. 141–163, 2003. View at Publisher · View at Google Scholar · View at Scopus
  47. M.-F. Chang, “Basal stability analysis of braced cuts in clay,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 126, no. 3, pp. 276–279, 2000. View at Publisher · View at Google Scholar · View at Scopus
  48. L. Bjerrum and O. Eide, “Stability of strutted excavations in clay,” Géotechnique, vol. 6, no. 1, pp. 32–47, 1956. View at Publisher · View at Google Scholar
  49. M.-S. Huang, X.-Y. Song, and H.-L. Qin, “Basal stability of braced excavations in K~0-consolidated soft clay by upper bound method,” Chinese Journal of Geotechnical Engineering, vol. 30, no. 2, pp. 250–255, 2008 (Chinese). View at Google Scholar · View at Scopus
  50. B. EN, Eurocode 7: Geotechnical design-Part 1: General rules, British Standards, UK, 2004.
  51. R. Frank, Designers' Guide to EN 1997-1 Eurocode 7: Geotechnical Design-General Rules, Thomas Telford Ltd, 2004. View at Publisher · View at Google Scholar
  52. C. A. Coulomb, “Essai sur une application des règles des maximis et minimis à quelques problèmes de statique relatifs à l'architecture,” in Mèmires de l'Academie des Sciences, vol. 7, pp. 343–382, Mèmires de l'Academie des Sciences, Paris, 1773. View at Google Scholar
  53. DI, Code of practice for foundation engineering, Dansk Ingeniorforening, Copenhagen, Denmark, 1965.
  54. CGS, Canadian foundation engineering manual, Canadian Geotechnical Society, Toronto, Canada, 1992.
  55. NRC, National building code of Canada, National Research Council of Canada, Ottawa, Canada, 1995.
  56. ANSI, “Development of a probability based load criterion for American National Standard A58,” Tech. Rep. NBS SP 577, American National Standards Institute, National Bureau of Standards, Washington, DC, USA, 1980. View at Publisher · View at Google Scholar
  57. European Committee for Standardization (CEN), Geotechnical design, general rules, Danish Geotechnical Institute, Prestandard (ENV), Copenhagen, Denmark, 1993.
  58. A. J. Bond, B. Schuppener, G. Scarpelli et al., “Eurocode 7: geotechnical design worked examples,” in Workshop Eurocode, vol. 7, 2013. View at Google Scholar
  59. A. Sieminska-lewandowska and M. Mitew-Czajewska, “Design of deep excavations according to Eurocode 7,” 18ème Congrès Français de Mécanique, 2007. View at Google Scholar
  60. C. Y. Ou, Deep Excavation: Theory and Practice, CRC Press, 2006.
  61. H. F. Yu, Research on construction stability of cut and cover reverse method underpass road and analysison deformation characteristics of column [M.S. thesis], Northeastern University, Boston, Mass, USA, 2014.
  62. CECS22:2005 Technical specification for ground anchors. 2005. (in Chinese).
  63. Central Research Institute of Building and Construction Co., Ltd. Specifications for Bolt-Shotcrete Support, China Planning Press, Beijing, China, 2001 (Chinese).
  64. K. B. Yu, K. B. Chen, and M. L. Yang, “Study on prestress loss of prestressed anchor cable,” Rock and Soil Mechanics, vol. 26, no. S1, 2005 (Chinese). View at Google Scholar
  65. MOHURD, Technical Code for Monitoring of Building Foundation Pit Engineering, Beijing, China, 2012 (Chinese).
  66. F. S. Li, Analysis of the Surface Settlement Due to the Dewatering of Subway Engineering in Shenyang [M.S. thesis], Shenyang Jianzhu University, 2009.