Multiobjective Optimization Model for Profile Design of Hump Distributing Zone

Table 10

Solution set with two methods of hump profile design of distributing zone.

No.	S1; (10^−3)	S2; (10^−3)	S3; (10^−3)	S4; (10^−3)	S5; (10^−3)	S6; (10^−3)							HH	WART
	54.7	18.4	8.7	8.0	5.5	1.5	30	83	110	196	310	393.66	4.255	778.827
	54.8	17.8	6.7	2.7	9.0	0.6	30	83	164	198	302	393.66	4.213	780.720
	54.9	18.2	5.0	5.0	6.1	3.6	30	83	114	193	298	393.66	4.147	783.875
	53.2	19.1	7.9	7.9	4.0	0.4	30	83	146	197	348	393.66	4.097	786.410
	54.5	16.7	9.4	7.4	2.5	3.3	30	83	144	198	307	393.66	4.014	787.948
	53.4	18.9	3.3	9.3	4.2	2.5	30	83	144	195	313	393.66	3.977	791.551
	54.0	19.9	3.8	3.8	6.7	−0.2	28	83	113	194	324	393.66	3.885	794.150
	54.9	17.2	1.7	7.9	3.8	2.0	29	83	113	198	325	393.66	3.863	795.772
	54.1	16.3	9.9	2.1	4.2	1.8	28	83	159	199	274	393.66	3.778	797.065
	54.5	18.8	4.5	2.0	3.8	3.5	28	83	163	194	352	393.66	3.728	798.674
	54.7	16.2	2.1	6.2	3.4	2.8	30	83	116	197	295	393.66	3.681	800.504
	54.2	18.1	2.9	3.6	4.8	1.1	29	83	160	199	335	393.66	3.630	803.904
	54.8	15.8	4.6	5.1	3.6	1.9	29	83	164	195	332	393.66	3.584	806.544
	52.4	19.4	3.9	6.1	2.1	2.5	28	83	154	198	346	393.66	3.510	809.348
	51.7	18.4	4.4	4.0	4.4	0.9	29	83	145	196	292	393.66	3.484	813.706
	54.8	15.9	0.0	4.5	3.6	2.3	29	83	112	198	288	393.66	3.402	816.304
	53.0	12.2	8.1	9.3	1.4	−0.1	28	83	144	197	340	393.66	3.337	829.300
	52.0	13.7	5.9	9.3	5.8	−0.9	28	83	160	192	268	393.66	3.289	833.284
	51.6	12.5	6.2	6.7	2.0	1.5	29	83	112	199	280	393.66	3.267	840.509
	54.1	10.0	6.9	4.6	2.5	1.9	28	83	165	198	352	393.66	3.247	843.870
	50	16	8	6	3	-	28	83	168	185	393.66	-	3.717	827.582