Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017 (2017), Article ID 9739678, 11 pages
https://doi.org/10.1155/2017/9739678
Research Article

Ultrasonic Adaptive Detection for Aerospace Components with Varying Thickness

School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China

Correspondence should be addressed to Zhen Xiao; moc.liamg@68nehzwahs

Received 19 October 2016; Accepted 15 January 2017; Published 15 February 2017

Academic Editor: Paolo Boscariol

Copyright © 2017 Zhen Xiao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Tavakoli, L. Marques, and A. T. D. Almeida, “Development of an industrial pipeline inspection robot,” Industrial Robot, vol. 37, no. 3, pp. 309–322, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Shang, B. Bridge, T. Sattar, S. Mondal, and A. Brenner, “Development of a climbing robot for inspection of long weld lines,” Industrial Robot, vol. 35, no. 3, pp. 217–223, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. M. R. Pedersen, L. Nalpantidis, R. S. Andersen et al., “Robot skills for manufacturing: from concept to industrial deployment,” Robotics and Computer-Integrated Manufacturing, vol. 37, pp. 282–291, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. W. H. Weber, H. D. Mair, D. Jansen, and L. Lombardi, “Advances in inspection automation,” Review of Progress in Quantitative Non-Destructive Evaluation, vol. 32, no. 1511, pp. 1654–1661, 2013. View at Publisher · View at Google Scholar
  5. K. P. Liu, B. L. Luk, F. Tong, and Y. T. Chan, “Application of service robots for building NDT inspection tasks,” Industrial Robot, vol. 38, no. 1, pp. 58–65, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Shang, T. Sattar, S. Chen, and B. Bridge, “Design of a climbing robot for inspecting aircraft wings and fuselage,” Industrial Robot, vol. 34, no. 6, pp. 495–502, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. T. Messay, R. Ordóñez, and E. Marcil, “Computationally efficient and robust kinematic calibration methodologies and their application to industrial robots,” Robotics and Computer-Integrated Manufacturing, vol. 37, article no. 1350, pp. 33–48, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. T. P. Sattar and A.-A. Brenner, “Robotic system for inspection of test objects with unknown geometry using NDT methods,” Industrial Robot, vol. 36, no. 4, pp. 340–343, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Summan, S. Pierce, G. Dobie, J. Hensman, and C. Macleod, “Practical constraints on real time Bayesian filtering for NDE applications,” Mechanical Systems and Signal Processing, vol. 42, no. 1-2, pp. 181–193, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Ross, D. Klose, and H. Jarod, “Conceptual design of NDT FIFLD inspection system,” IMECE 2008: Safety Engineering, Risk Analysis And Reliability Methods, vol. 1, no. 6, pp. 335–338, 2009. View at Google Scholar
  11. L. Xue, Y. Zou, J. Huang, J. Huang, X. Tao, and Y. Hu, “Constant speed control for complex cross-section welding using robot based on angle self-test,” Chinese Journal of Mechanical Engineering, vol. 27, no. 2, pp. 260–268, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Miao, Y. Liu, H. Ma, and H. Jin, “The pose estimation of mobile robot based on improved point cloud registration,” International Journal of Advanced Robotic Systems, vol. 13, no. 52, pp. 342–350, 2016. View at Google Scholar
  13. Z. Lu, C. Yang, D. Qin, and Y. Luo, “Estimating the parameters of ultrasonic echo signal in the Gabor transform domain and its resolution analysis,” Signal Processing, vol. 120, pp. 607–619, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. N. Kashiri, M. Laffranchi, D. G. Caldwell, and N. G. Tsagarakis, “Dynamics and control of an anthropomorphic compliant arm equipped with friction clutches,” IEEE/ASME Transactions on Mechatronics, vol. 21, no. 2, pp. 694–707, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. J. A. Sánchez-Durán, J. A. Hidalgo-López, J. Castellanos-Ramos, Ó. Oballe-Peinado, and F. Vidal-Verdú, “Influence of errors in tactile sensors on some high level parameters used for manipulation with robotic hands,” Sensors, vol. 15, no. 8, pp. 20409–20435, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. D. Stavrou, D. G. Eliades, C. G. Panayiotou, and M. M. Polycarpou, “Fault detection for service mobile robots using model-based method,” Autonomous Robots, vol. 40, no. 2, pp. 383–394, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. A. S. Rezazadeh, H. R. Koofigar, and S. Hosseinnia, “Adaptive fault detection and isolation for a class of robot manipulators with time-varying perturbation,” Journal of Mechanical Science and Technology, vol. 29, no. 11, pp. 4901–4911, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. H.-S. Wang, D.-Y. Zhan, P.-L. Huang, and W.-F. Chen, “Inverse kinematics of a heavy duty manipulator with 6-DOF based on dual quaternion,” Journal of Central South University, vol. 22, no. 7, pp. 2568–2577, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. B. Zhao, C. Li, T. Ma, and Y. Li, “Multiple faults detection and isolation via decentralized sliding mode observer for reconfigurable manipulator,” Journal of Electrical Engineering & Technology, vol. 10, no. 6, pp. 2393–2405, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. K. S. Fu, R. C. Gonzalez, and C. X. G. Lee, Robotics: Control, Sensing, Vision, and Intelligence, McGraw-Hill, 1987.
  21. C. Kim, D. Espalin, A. Cuaron et al., “Cooperative tool path planning for wire embedding on additively manufactured curved surfaces using robot kinematics,” Journal of Mechanisms and Robotics, vol. 7, no. 2, Article ID 021003, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. Lu, C. Xu, D. Xiao, and F. Meng, “Nondestructive testing method for curved surfaces based on the multi-gaussian beam model,” Journal of Nondestructive Evaluation, vol. 34, no. 4, pp. 30–39, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. Z. Lu, C. Xu, Q. Pan, F. Meng, and X. Li, “Automatic method for synchronizing workpiece frames in twin-robot nondestructive testing system,” Chinese Journal of Mechanical Engineering, vol. 28, no. 4, pp. 860–868, 2015. View at Publisher · View at Google Scholar · View at Scopus