Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 1040973, 16 pages
https://doi.org/10.1155/2018/1040973
Research Article

Alternative Solutions of the Geodesic Differential Equations Applied to the Mechanical Analysis of the Tensile Armors of Flexible Pipes under Bending

COPPE/UFRJ, Department of Civil Engineering, Centro de Tecnologia, Bloco I2000, Sala I116, Cidade Universitária, 21945-970 Ilha do Fundão, RJ, Brazil

Correspondence should be addressed to Gabriel M. Gonzalez; moc.liamg@gsottamg

Received 8 December 2017; Accepted 23 January 2018; Published 26 February 2018

Academic Editor: Francesco Marotti de Sciarra

Copyright © 2018 Gabriel M. Gonzalez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. API, Recommended Practice for Flexible Pipe, American Petroleum Institute, Washington, USA, 4th edition, 2014.
  2. M. Tang, C. Yang, J. Yan, and Q. Yue, “Validity and limitation of analytical models for the bending stress of a helical wire in unbonded flexible pipes,” Applied Ocean Research, vol. 50, pp. 58–68, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Dai, S. Sævik, and N. Ye, “Friction models for evaluating dynamic stresses in non-bonded flexible risers,” Marine Structures, vol. 55, pp. 137–161, 2017. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Zhou and M. A. Vaz, “A quasi-linear method for frictional model in helical layers of bent flexible risers,” Marine Structures, vol. 51, pp. 152–173, 2017. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Sævik, “A finite element model for predicting stresses and slip in flexible pipe armouring tendons,” Computers & Structures, vol. 46, no. 2, pp. 213–230, 1993. View at Publisher · View at Google Scholar · View at Scopus
  6. J. J. Féret, J. Leroy, and P. Estrier, “Calculation of stresses and slips in flexible armour layers with layers interaction,” in Proceedings of the 14th OMAE, 205494, Copenhagen, Denamark, 1995.
  7. J.-M. Leroy and P. Estrier, “Calculation of stresses and slips in helical layers of dynamically bent flexible pipes,” Oil & Gas Science and Technology - Revue d'IFP Energies nouvelles, vol. 56, no. 6, pp. 545–554, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Sævik, “On stresses and fatigue in flexible pipes,” Tech. Rep., Department of Marine Structures, Norwegian Institute of Technology, University of Trondheim, Trondheim, Norway, 1992. View at Google Scholar
  9. J. J. Féret and C. L. Bournazel, “Calculation of stresses and slips in structural layers of unbonded flexible pipes,” Journal of Offshore Mechanics and Arctic Engineering, vol. 109, no. 3, pp. 263–269, 1987. View at Publisher · View at Google Scholar · View at Scopus
  10. A. E. Love, A Treatise on the Mathematical Theory of Elasticity, Cambridge University Press, Cambridge, UK, 1906. View at Publisher · View at Google Scholar
  11. P. Estrier, “Updated Method for the Determination of the Service Life of Flexible Risers,” in Proceedings of the First European Conference on Flexible Pipes, Umbilicals and Marine Cables (MARINFLEX), London, UK, 1992.
  12. J. M. M. Out and B. J. Von Morgen, “Slippage of helical reinforcing on a bent cylinder,” Engineering Structures, vol. 19, no. 6, pp. 507–515, 1997. View at Publisher · View at Google Scholar · View at Scopus
  13. R. Ramos Jr. and C. P. Pesce, “A consistent analytical model to predict the structural behavior of flexible risers subjected to combined loads,” Journal of Offshore Mechanics and Arctic Engineering, vol. 126, no. 2, pp. 141–146, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. C. M. Larsen, S. Sævik, and J. Qvist, “Design analysis,” in Handbook on Design and Operation of Flexible Pipes, D. Fergestad and S. A. Lotveit, Eds., vol. 1, 2014, part B, chapter B.1, NTNU/4Subsea/MARINTEK. View at Google Scholar
  15. S. Sævik, “Theoretical and experimental studies of stresses in flexible pipes,” Computer & Structures, vol. 89, pp. 97–106, 2011. View at Google Scholar
  16. N. H. Østergaard, On Lateral Buckling of Armouring Wires in Flexible Pipes, Department of Mechanical and Manufacturing Engineering, Aalborg University, Denmark, 2012.
  17. J. R. M. De Sousa, F. J. M. De Sousa, M. Q. De Siqueira, L. V. S. Sagrilo, and C. A. D. De Lemos, “A theoretical approach to predict the fatigue life of flexible pipes,” Journal of Applied Mathematics, vol. 2012, Article ID 983819, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. A. W. Nutbourne and R. R. Martin, Differential Geometry Applied to Curve and Surface Design, vol. 1, Ellis Horwood Limited, New York, NY, USA, 1988. View at MathSciNet
  19. M. P. do Carmo, Differential Geometry of Curves and Surfaces, Prentice-Hall Inc, Englewwod Cliffs, NJ, USA, 1976. View at MathSciNet
  20. M. Raussen, Elementary Differential Geometry: Curves and Surfaces, Aalborg University Press, Aalborg, Denmark, 2008.
  21. A. Gray, E. Abbena, and S. Salamon, Modern Differential Geometry of Curves and Surfaces with Mathematica, CRC Press Online, Boca Raton, Fla, USA, 3rd edition, 1993. View at MathSciNet
  22. S. G. Pinto, S. P. Rodriguez, and J. I. M. Torcal, “On the numerical solution of stiff IVPs by lobatto IIIA Runge-Kutta methods,” Journal of Computational and Applied Mathematics, vol. 82, no. 1-2, pp. 129–148, 1997. View at Publisher · View at Google Scholar · View at MathSciNet
  23. S. G. Pinto, S. P. Rodriguez, and J. I. M. Torcal, “Improving the efficiency of the iterative schemes for implicit Runge-Kutta methods,” Journal of Computational and Applied Mathematics, vol. 66, no. 1-2, pp. 227–238, 1996. View at Publisher · View at Google Scholar · View at Scopus
  24. S. G. Pinto, S. P. Rodriguez, and J. I. M. Torcal, “Implementation of high-order implicit Runge-Kutta methods,” Computers & Mathematics with Applications, vol. 41, pp. 1009–1024, 2001. View at Publisher · View at Google Scholar · View at MathSciNet
  25. S. Haykin, Neural Networks - A Comprehensive Foundation, Prentice Hall, 2005.
  26. M. Smith, Neural Networks for Statistical Modeling, vol. 10, Van Nostrand Reinhold, USA, 1995. View at Publisher · View at Google Scholar
  27. M. T. Hagan, H. B. Demuth, M. H. Beale, and O. de Jesús, Neural Network Design, Oklahoma State University, Oklahoma, Okla, USA, 2002.
  28. J. R. Koza, Genetic Programming: On the Programming of Computers by Means of Natural Selection, Stanford University Press, Redwood, Calif, USA, 1992. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Gen and R. Cheng, Genetic Algorithms and Engineering Design, John Wiley & Sons, New Jersey, NJ, USA, 1997.
  30. C. Chen, C. Luo, and Z. Jiang, “Block building programming for symbolic regression,” Neurocomputing, vol. 275, pp. 1973–1980, 2018. View at Publisher · View at Google Scholar
  31. M. Schmidt and H. Lipson, “Symbolic regression of implicit equations,” in Genetic Programming Theory and Practice, R. Riolo, U. O’Reilly, and T. McConaghy, Eds., vol. 7 of Genetic and Evolutionary Computation, pp. 73–85, Springer US, Boston, MA, USA, 2009. View at Publisher · View at Google Scholar
  32. D. R. Stoutemyer, “Can the eureqa symbolic regression program, computer algebra, and numerical analysis help each other?” Notice of the American Mathematical Society, vol. 60, no. 6, pp. 713–724, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. L. Fulchignoni and M. A. Vaz, “An empirical model for flexible pipe armor wire lateral buckling failure load,” Applied Ocean Research, vol. 66, pp. 46–54, 2017. View at Publisher · View at Google Scholar · View at Scopus
  34. M. Schmidt and H. Lipson, “Distilling free-form natural laws from experimental data,” Science, vol. 324, no. 5923, pp. 81–85, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. J. Bongard and H. Lipson, “Automated reverse engineering of nonlinear dynamical systems,” Proceedings of the National Acadamy of Sciences of the United States of America, vol. 104, no. 24, pp. 9943–9948, 2007. View at Publisher · View at Google Scholar · View at Scopus
  36. Mathworks, Neural Network ToolboxTM User's Guidem, vol. 8.2, EUA, 2014.