Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 1605817, 3 pages
https://doi.org/10.1155/2018/1605817
Editorial

Advanced Mathematical Methods for Collaborative Robotics

1Instituto de Diseño y Fabricación (IDF), Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain
2Departamento de Ingeniería de Sistemas y Automática (DISA), Universidad Miguel Hernández, Avda de la Universidad s/n, 03202 Elche, Spain
3Centre for Autonomous Systems (CAS), University of Technology Sydney (UTS), Sydney, NSW 2007, Australia

Correspondence should be addressed to Luis Gracia; se.vpu.asi@acargiul

Received 17 July 2018; Accepted 20 July 2018; Published 27 August 2018

Copyright © 2018 Luis Gracia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. Xie and L. Sun, “Force control based robotic grinding system and application,” in Proceedings of the 12th World Congress on Intelligent Control and Automation (WCICA '16), pp. 2552–2555, June 2016. View at Scopus
  2. L. Roveda, F. Vicentini, N. Pedrocchi, and L. M. Tosatti, “Impedance control based force-tracking algorithm for interaction robotics tasks: an analytically force overshoots-free approach,” in Proceedings of the 12th International Conference on Informatics in Control, Automation and Robotics (ICINCO '15), pp. 386–391, July 2015. View at Scopus
  3. Y. Kakinuma, K. Igarashi, S. Katsura, and T. Aoyama, “Development of 5-axis polishing machine capable of simultaneous trajectory, posture, and force control,” CIRP Annals - Manufacturing Technology, vol. 62, no. 1, pp. 379–382, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. A. M. Khan, D.-W. Yun, K. M. Zuhaib et al., “Estimation of Desired Motion Intention and compliance control for upper limb assist exoskeleton,” International Journal of Control, Automation, and Systems, vol. 15, no. 2, pp. 802–814, 2017. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Li and S. S. Ge, “Force tracking control for motion synchronization in human-robot collaboration,” Robotica, vol. 34, no. 6, pp. 1260–1281, 2016. View at Google Scholar
  6. J. Vogel, S. Haddadin, B. Jarosiewicz et al., “An assistive decision-and-control architecture for force-sensitive hand-arm systems driven by human-machine interfaces,” The International Journal of Robotics Research, vol. 34, no. 6, pp. 763–780, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Siciliano, L. Sciavicco, L. Villani, and G. Oriolo, Robotics. Modelling, Planning and Control, Springer, London, UK, 2009. View at Publisher · View at Google Scholar
  8. S. Chiaverini, G. Oriolo, and I. Walker, “Kinematically redundant manipulators,” in Springer Handbook of Robotics, pp. 245–268, Springer, Berlin, Germany, 2008. View at Google Scholar