Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 6092479, 16 pages
https://doi.org/10.1155/2018/6092479
Research Article

Nonlinear Analysis for the Crack Control of SMA Smart Concrete Beam Based on a Bidirectional B-Spline QR Method

1College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China
2The Key Laboratory of Disaster Prevention and Structural Safety of the Education Ministry, Guangxi University, Nanning 530004, China
3Electric Power Research Institute of Guangxi Power Grid Co., Ltd., Nanning 530023, China
4Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China

Correspondence should be addressed to Shuang-bei Li; moc.361@09hwbsl

Received 1 August 2017; Revised 10 November 2017; Accepted 16 November 2017; Published 11 January 2018

Academic Editor: Fabrizio Greco

Copyright © 2018 Yan Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Yao, S. E. Tung, and B. Glisic, “Crack detection and characterization techniques An overview,” Structural Control and Health Monitoring, vol. 21, no. 9, pp. 1387–1413, 2014. View at Google Scholar
  2. C. D. Moen and S. R. Sharp, “Bond properties between concrete and corrosion-resistant reinforcing steels,” ACI Structural Journal, vol. 113, no. 2, pp. 383–392, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Michel, B. J. Pease, and A. Peterova, “Penetration of corrosion products and corrosion-induced cracking in reinforced cementitious materials: Experimental investigations and numerical simulations,” Cement Concrete Composites, vol. 47, no. SI, pp. 75–86, 2014. View at Publisher · View at Google Scholar
  4. M. A. Adam, M. Said, A. A. Mahmoud, and A. S. Shanour, “Analytical and experimental flexural behavior of concrete beams reinforced with glass fiber reinforced polymers bars,” Construction and Building Materials, vol. 84, pp. 354–366, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Han, Y. Wang, S. Dong et al., “Smart concretes and structures: a review,” Journal of Intelligent Material Systems and Structures, vol. 26, no. 11, pp. 1303–1345, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. M. M. Sherif, J. Tanks, and O. E. Ozbulut, “Acoustic emission analysis of cyclically loaded superelastic shape memory alloy fiber reinforced mortar beams,” Cement and Concrete Research, vol. 95, pp. 178–187, 2017. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Silwal, R. J. Michael, and O. E. Ozbulut, “A superelastic viscous damper for enhanced seismic performance of steel moment frames,” Engineering Structures, vol. 105, pp. 152–164, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. S. M. R. Khalili, M. Botshekanan Dehkordi, and E. Carrera, “A nonlinear finite element model using a unified formulation for dynamic analysis of multilayer composite plate embedded with SMA wires,” Composite Structures, vol. 106, pp. 635–645, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. J. M. Jani, M. Leary, A. Subic, and M. A. Gibson, “A review of shape memory alloy research, applications and opportunities,” Materials and Corrosion, vol. 56, pp. 1078–1113, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. E. Patoor, D. C. Lagoudas, P. B. Entchev, L. C. Brinson, and X. Gao, “Shape memory alloys, Part I: General properties and modeling of single crystals,” Mechanics of Materials, vol. 38, no. 5-6, pp. 391–429, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. E. Choi, D. J. Kim, J.-H. Hwang, and W. J. Kim, “Prestressing effect of cold-drawn short NiTi SMA fibres in steel reinforced mortar beams,” Smart Materials and Structures, vol. 25, no. 8, Article ID 085041, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Li, Z.-Q. Liu, and J.-P. Ou, “Behavior of a simple concrete beam driven by shape memory alloy wires,” Smart Materials and Structures, vol. 15, no. 4, article no. 017, pp. 1039–1046, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Deng, Q. Li, and H. Sun, “Behavior of concrete beam with embedded shape memory alloy wires,” Engineering Structures, vol. 28, no. 12, pp. 1691–1697, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. M. K. Kim, D. J. Kim, Y.-S. Chung, and E. Choi, “Direct tensile behavior of shape-memory-alloy fiber-reinforced cement composites,” Construction and Building Materials, vol. 102, pp. 462–470, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Sun, D. Liang, Q. Gao, and J. Zhou, “Analysis on factors affecting the self-repair capability of SMA wire concrete beam,” Mathematical Problems in Engineering, vol. 2013, Article ID 138162, 6 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Czaderski, M. Shahverdi, R. Brönnimann, C. Leinenbach, and M. Motavalli, “Feasibility of iron-based shape memory alloy strips for prestressed strengthening of concrete structures,” Construction and Building Materials, vol. 56, pp. 94–105, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Shin and B. Andrawes, “Emergency repair of severely damaged reinforced concrete columns using active confinement with shape memory alloys,” Smart Materials and Structures, vol. 20, no. 6, Article ID 065018, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Abdulridha, D. Palermo, S. Foo, and F. J. Vecchio, “Behavior and modeling of superelastic shape memory alloy reinforced concrete beams,” Engineering Structures, vol. 49, pp. 893–904, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. A. R. Khaloo, I. Eshghi, and P. P. Aghl, “Study of behavior of reinforced concrete beams with smart rebars using finite element modeling,” International Journal of Civil Engineering, vol. 8, no. 3, pp. 221–231, 2010. View at Google Scholar · View at Scopus
  20. M. S. Alam, M. A. Youssef, and M. Nehdi, “Analytical prediction of the seismic behaviour of superelastic shape memory alloy reinforced concrete elements,” Engineering Structures, vol. 30, no. 12, pp. 3399–3411, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. Q. Chen and B. Andrawes, “Finite element analysis of actively confined concrete using shape memory alloys,” Journal of Advanced Concrete Technology, vol. 12, no. 12, pp. 520–534, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Lu, F. S. Cui, and M. J. Tan, “A theoretical model for the bending of a laminated beam with SMA fiber embedded layer,” Composite Structures, vol. 90, no. 4, pp. 458–464, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. M.-Y. Wang, H.-L. Ji, J.-H. Qiu, and C. Zhang, “Plate stiffness active control with shape memory alloys and layout optimization,” Journal of Vibration and Shock, vol. 33, no. 23, pp. 30–36, 2014. View at Google Scholar
  24. H. Li, Z.-Q. Liu, Z.-W. Li, and J.-P. Ou, “Study on damage emergency repair performance of a simple beam embedded with shape memory alloys,” Advances in Structural Engineering, vol. 7, no. 6, pp. 495–501, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. S.-B. Li, C.-M. Mo, and Q.-G. Liang, “Recovery performance of shape memory alloy and its application in repairing cracks of concrete beams,” Concrete, vol. no. 4, pp. 68–73, 2015. View at Google Scholar
  26. S. B. Li, Q. G. Liang, and J. P. Li, “Finite Element Analysis for the Crack Self-Repairing Behavior of the Concrete Beam Embedded Shape Memory Alloy,” Applied Mechanics and Materials, vol. 507, pp. 455–459, 2014. View at Publisher · View at Google Scholar
  27. V. P. Nguyen, T. Rabczuk, S. Bordas, and M. Duflot, “Meshless methods: a review and computer implementation aspects,” Mathematics and Computers in Simulation, vol. 79, no. 3, pp. 763–813, 2008. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  28. L. X. Peng, Y.-P. Tao, H.-Q. Li, and G.-K. Mo, “Geometric nonlinear meshless analysis of ribbed rectangular plates based on the FSDT and the moving least-squares approximation,” Mathematical Problems in Engineering, vol. 2014, Article ID 548708, 13 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. L. X. Peng, “Free Vibration Analysis of Symmetrically Laminated Folded Plate Structures Using an Element-Free Galerkin Method,” Mathematical Problems in Engineering, vol. 2015, Article ID 124296, 13 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. S.-B. Li, H. Wu, and C.-M. Mo, “Dynamic analysis of thick/thin piezoelectric FGM plates with spline meshless method,” Journal of Vibration and Shock, vol. 36, no. 7, pp. 116–122, 2017. View at Google Scholar
  31. P. Liu, K. Lin, H. Liu, and R. Qin, “Free Transverse Vibration Analysis of Axially Functionally Graded Tapered Euler-Bernoulli Beams through Spline Finite Point Method,” Shock and Vibration, vol. 2016, Article ID 5891030, 23 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  32. S.-B. Li, L.-X. Huang, L.-J. Jiang, and R. Qin, “A bidirectional B-spline finite point method for the analysis of piezoelectric laminated composite plates and its application in material parameter identification,” Composite Structures, vol. 107, no. 1, pp. 346–362, 2014. View at Publisher · View at Google Scholar · View at Scopus
  33. R. Qin, Computational Structure Mechanics, Guangxi Normal University Press, Guilin, China, 1997.
  34. A. C. T. Chen and W. F. Chen, “Constitutive relations for concrete,” Journal of Engineering Mechanics, vol. 101, no. EM4, pp. 465–481, 1975. View at Google Scholar
  35. R. Q, Nolinear Analysis of Engineering Structures, Science Press, Beijing, China, 2006.
  36. J.-Q. Jiang and X.-Z. Lu, Finite Element Analysis of Concrete Structures, Tsinghua University Press, Beijing, China, 2013.
  37. GB, 50010-2010, Code for Design of Concrete Structures, General Administration of Quality Supervision, Inspection and Quarantine of the Peoples’s Republic of China (AQSIQ), 2010.