Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 6350178, 11 pages
https://doi.org/10.1155/2018/6350178
Research Article

Analysis Model of Cost-Effectiveness for Value Evaluation of Building Elements

Department of Architectural Engineering, Songwon University, 73 Songam-ro, Nam-gu, Gwangju 61756, Republic of Korea

Correspondence should be addressed to Jongsik Lee; moc.etan@eelsj

Received 21 August 2017; Revised 21 January 2018; Accepted 24 January 2018; Published 21 February 2018

Academic Editor: Anna M. Gil-Lafuente

Copyright © 2018 Jongsik Lee. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Oh, S. Lee, and T. Lee, “A study on the economic analysis in apartment house based on life cycle costing techniques,” Journal of the Architectural Institute of Korea, vol. 13, no. 3, pp. 325–332, 1997. View at Google Scholar
  2. V. P. De Freitas and J. M. Delgado, Durability of Building Materials and Components, Springer, New York, NY, USA, 2013.
  3. H. Chun, A study on analyzing the current state of the contract & change order by awarding method in public construction projects [M.S. thesis], Hanyang University, Seoul, South Korea, 2007.
  4. X. Cui, Evaluation of speculation in the analysis phase for the value engineering of a shopping mall [Ph.D. thesis], Chungbuk National University, 2009.
  5. Korea Construction Value Engineering Research Institute, An Efficient Review Plan (Design VE) for the Economic Efficiency of Design, Ministry of Land, Transport, and Maritime Affairs of Korea, 2008.
  6. Ministry of Land and Transport and Maritime Affairs of Korea, Development of A Core Construction Engineering Technology Towards Global Competitiveness, Ministry of Land, Transport, and Maritime Affairs of Korea, 2005.
  7. H. Z. Alibaba and M. B. Özdeniz, “A building elements selection system for architects,” Building and Environment, vol. 39, no. 3, pp. 307–316, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. E. K. Zavadskas, A. Kaklauskas, Z. Turskis, and J. Tamošaitiene, “Selection of the effective dwelling house walls by applying attributes values determined at intervals,” Journal of Civil Engineering and Management, vol. 14, no. 2, pp. 85–93, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. D. Jee and K. Kang, “A method for optimal material selection aided with decision making theory,” Materials Design, vol. 21, no. 3, pp. 199–206, 2000. View at Publisher · View at Google Scholar
  10. S. Rahman, S. Perera, H. Odeyinka, and Y. Bi, “A knowledge-based decision support system for roofing materials selection and cost estimating: a conceptual framework and data modelling,” in Proceedings of the 25th Annual Conference of the Association of Researchers in Construction Management, ARCOM 2009, pp. 1081–1090, Nottingham, England, September 2009. View at Scopus
  11. R. S. Perera and U. L. Fernando, “Cost modelling for roofing material selection,” Built-Environment, vol. 3, no. 1, pp. 11–24, 2002. View at Google Scholar
  12. J. Do, H. Song, and Y. Soh, “AHP based-optimal selection of concrete patching repair materials considering qualitative evaluation criteria,” Journal of the Korea Concrete Institute, vol. 20, no. 1, pp. 965–968, 2008. View at Google Scholar
  13. D. Castro-Lacouture, J. A. Sefair, L. Flórez, and A. L. Medaglia, “Optimization model for the selection of materials using a LEED-based green building rating system in Colombia,” Building and Environment, vol. 44, no. 6, pp. 1162–1170, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Yang and I. C. Ogunkah, “A multi-criteria decision support system for the selection of low-cost green building materials and components,” Journal of Building Construction and Planning Research, vol. 1, no. 4, pp. 89–130, 2013. View at Publisher · View at Google Scholar
  15. O. Kaan, A. Neville, J. Dima, and H. Sajjad, Guidelines for Life Cycle Cost Analysis, Stanford University, 2013.
  16. J. Yoo, C. Hyun, and M. Kim, “A study on the method for selecting the optimum building component by value evaluation,” Journal of the Architectural Institute of Korea, vol. 11, no. 12, pp. 297–307, 1995. View at Google Scholar
  17. R. Stewart, Fundamentals of Value Methodology, Xlibris Corporation, 2005.
  18. A. Dell’Isola, Value Engineering in The Construction Industry, Reinhold Inc, 1998.
  19. J. Lee and J. Chun, “A numerical value evaluation model for the optimum design selection,” Journal of Asian Architecture and Building Engineering, vol. 11, no. 2, pp. 283–290, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Hong, S. Han, and S. Lee, “Simulation-based determination of optimal life-cycle cost for FRP bridge deck panels,” Automation in Construction, vol. 16, no. 2, pp. 140–152, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. Housing Research Institute of Land and Housing Corporation, A Study on the Performance Standard for Element of Apartment House, Housing Research Institute of Land and Housing Corporation, 1998.
  22. S. Kim, B. Jeong, and J. Kim, Decision Making Analysis and Application, Youngji Publishers, 2009.