Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 7527402, 12 pages
https://doi.org/10.1155/2018/7527402
Research Article

Axial Force Analysis and Roll Contour Configuration of Four-High CVC Mill

1Heavy Machinery Engineering Research Center of the Ministry of Education, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China
2College of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China

Correspondence should be addressed to Yu-gui Li; moc.361@8002iuguyil

Received 24 July 2017; Accepted 14 September 2017; Published 4 January 2018

Academic Editor: Marco Pizzarelli

Copyright © 2018 Guang-ming Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. J. Edwards and P. D. Spooner, “Analysis of strip shape,” Automation of Tandem Mills, A Collection of Monographs, Metals Society, pp. 176–212, 1973, London. View at Google Scholar
  2. K. N. Shohet and N. A. Townsend, “Roll bending methods of crown control in four high plate mill,” Journal of the Iron and Steel Institute, vol. no.11, pp. 1088–1098, 1968. View at Google Scholar
  3. K. Nakajima, “Newly developed crown and shape control method in hot strip mill,” in Proceedings of the International Conference on Steel Rolling, 1, pp. 544–555, Tokyo, Japan, 1980.
  4. Y. Tozawa and T. Ishikawa, “Study on stress distribution in strip rolling - rolling pressure and stresses at the upper stream side of roll gap,” Memories of the Faculty of Engineering Nagoya University, vol. 36, no. 2, pp. 79–117, 1984. View at Google Scholar · View at Scopus
  5. G. D. Wang, The Shape Control and Theory, Metallurgical Industry Press, Beijing, China, 1986 (Chinese).
  6. Z. Y. Jiang, D. Wei, and A. K. Tieu, “Analysis of cold rolling of ultra thin strip,” Journal of Materials Processing Technology, vol. 209, no. 9, pp. 4584–4589, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. D. Y. Gong, J. Z. Xu, and F. C. Yuan, “Study on roll elastic deformation asymmetrical 4-high mill stiffness,” Journal of Northeastern University (Natural Science), vol. 33, no. 11, pp. 1586–1590, 2012 (Chinese). View at Google Scholar
  8. X. G. Liang, “Preset model of bending force for six-high tandem cold rolling mill,” Iron and Steel, vol. 49, no. 10, pp. 40–43, 2014 (Chinese). View at Publisher · View at Google Scholar · View at Scopus
  9. D. C. Wang, Y. L. Wu, and H. M. Liu, “High-efficiency calculation method for roll stack elastic deformation of four-high mill,” Iron and Steel, vol. 50, no. 11, pp. 69–74, 2015 (Chinese). View at Google Scholar
  10. J. S. Chen, J. Wang, and W. Q. Han, “Study on models of work roll contact for tandem cold rolling process,” Steel Rolling, vol. 33, no. 5, pp. 27–33, 2016 (Chinese). View at Google Scholar
  11. X. Yang, C. B. Hu, K.-X. Peng, and C.-N. Tong, “Load distribution of evolutionary algorithm for complex-process optimization based on differential evolutionary strategy in hot rolling process,” Mathematical Problems in Engineering, vol. 2013, Article ID 675381, 8 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. J. G. Cao, J. Zhang, and S. J. Zhang, Steel Rolling Equipments and Automation, Chemical Industry Press, Beijing, China, 1st edition, 2010 (Chinese).
  13. C. Lu, A. K. Tieu, and Z. Jiang, “A design of a third-order CVC roll profile,” Journal of Materials Processing Technology, vol. 125-126, pp. 645–648, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. G. C. Wei, J. G. Cao, J. Zhang, J. W. Hao, and G. Chen, “Optimization and application of CVC work roll contour on 2250 hot strip mills,” Journal of Central South University (Science and Technology), vol. 38, no. 5, pp. 937–942, 2007 (Chinese). View at Google Scholar
  15. G. M. Liu, H. S. Di, and A. Chang, “Discussion on design of CVC roll contour and its equivalent crown,” Journal of Northeastern University (Natural Science), vol. 29, no. 10, pp. 1443–1446, 2008 (Chinese). View at Google Scholar
  16. G. H. Yang, J. G. Cao, J. Zhang, S. Jia, and R. Tan, “Backup roll contour of a SmartCrown tandem cold rolling mill,” Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials, vol. 15, no. 3, pp. 357–361, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. Q. Wu, D. L. Sun, C. S. Liu, and C. G. Li, “Analysis of surface and sub-surface initiated spalling of forged cold work rolls,” Engineering Failure Analysis, vol. 15, no. 4, pp. 401–410, 2008. View at Google Scholar
  18. A. D. Foster, J. Lin, D. C. J. Farrugia, and T. A. Dean, “A test for evaluating the effects of stress-states on damage evolution with specific application to the hot rolling of free-cutting steels,” International Journal of Damage Mechanics, vol. 20, no. 1, pp. 113–129, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. D. Benasciutti, “On thermal stress and fatigue life evaluation in work rolls of hot rolling mill,” Journal of Strain Analysis for Engineering Design, vol. 47, no. 5, pp. 297–312, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Kong, J. Cao, Y. Wang et al., “Development of smart contact backup rolls in ultra-wide stainless strip rolling process,” Materials and Manufacturing Processes, vol. 29, no. 2, pp. 129–133, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Cao, X. Chen, Q. Xhang, and A. He, “Roll wear pattern and appraisal of roll contour in hot wide strip mill,” Journal of University of Science and Technology Beijing, vol. 21, no. 2, pp. 188–190, 1999 (Chinese). View at Google Scholar · View at Scopus
  22. J. G. Cao, S.-J. Liu, J. Zhang, P. Song, T.-L. Yan, and Y.-Z. Zhou, “ASR work roll shifting strategy for schedule-free rolling in hot wide strip mills,” Journal of Materials Processing Technology, vol. 211, no. 11, pp. 1768–1775, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. G. Xu, X. J. Liu, W. J. Xiong, J. R. Zhao, and X. Q. Yu, “Appraisal of roll wear pattern of CVC mill,” Iron and Steel Vanadium Titanium, vol. 27, no. 3, pp. 60–62, 2006 (Chinese). View at Google Scholar
  24. J. W. Hao, J.-G. Cao, J. Zhang, G.-C. Wei, Y.-Z. Zhou, and G. Chen, “Backup roll contour of 2250 CVC hot strip mill,” Journal of Central South University (Science and Technology), vol. 38, no. 4, pp. 734–738, 2007 (Chinese). View at Google Scholar · View at Scopus
  25. J. Q. Sun, H. X. Zhang, and X. R. Wang, “Optimization of backup roll chamfer shape for four high CVC rolling mill,” Angang Technology, vol. 3, pp. 1–5, 2008 (Chinese). View at Google Scholar
  26. G. M. Liu, H. S. Di, and L. Hao, “An analyses on contact pressure between rolls of 4-High CVC cold rolling mill,” China Metallurgy, vol. 20, no. 2, pp. 11–14, 2010 (Chinese). View at Google Scholar
  27. D. F. Guo, J. Shao, and A. R. He, “Research on working performance of backup roll chamfer for CVC tandem mill,” Steel Rolling, vol. 27, no. 6, pp. 5–10, 2010 (Chinese). View at Google Scholar
  28. X. D. Wang, F. Li, and B. H. Li, “Development and application of pressure-equalizing back-up roll contour in hot strip mill,” Iron and Steel, vol. 47, no. 7, pp. 44–48, 2012. View at Google Scholar
  29. W. He, The Curve Design of CVC Roll Profile And Research on Roll System Elastic Deformation, Master dissertation, Northeastern University, Shenyang, Liaoning, China, 2006.
  30. G. H. Yang, J.-G. Cao, J. Zhang, C. Wang, and S.-H. Jia, “Optimization of application of SmartCrown on tandem cold rolling mill,” Iron and Steel, vol. 41, no. 9, pp. 56–59, 2006 (Chinese). View at Google Scholar · View at Scopus