Research Article
A Method for Estimating the Surface Roughness of Rock Discontinuities
Table 1
values for different values of
D for typical profiles.
| JRC | ( mm) | | ( mm) | | | Average | | | | Average |
| 0.4 | 0.4068 | 0.3771 | 0.3920 | | 0.3195 | 0.3001 | 0.3098 | 2.8 | 0.4611 | 0.3855 | 0.4233 | | 0.4414 | 0.3468 | 0.3941 | 5.8 | 0.5069 | 0.4406 | 0.4737 | | 0.4474 | 0.3966 | 0.4220 | 6.7 | 0.6041 | 0.6253 | 0.6147 | | 0.6035 | 0.6144 | 0.6089 | 9.5 | 0.7034 | 0.5507 | 0.6271 | | 0.6641 | 0.5112 | 0.5877 | 10.8 | 0.6364 | 0.6797 | 0.6580 | | 0.6195 | 0.6497 | 0.6346 | 12.8 | 0.8196 | 0.7106 | 0.7651 | | 0.7629 | 0.6876 | 0.7253 | 14.5 | 0.7879 | 0.8039 | 0.7959 | | 0.7614 | 0.7742 | 0.7678 | 16.7 | 1.0236 | 0.8319 | 0.9277 | | 0.9640 | 0.7612 | 0.8626 | 18.7 | 1.0718 | 1.1521 | 1.1119 | | 1.0596 | 1.1075 | 1.0836 |
|
|
and represent the values with respect to the shear directions along the positive and negative x-axis, respectively. |