Research Article
Error Distribution of a 5-Axis Measuring Machine Based on Sensitivity Analysis of Geometric Errors
Table 5
The coordinates of each test point in the workspace.
| Test point | X (mm) | Y (mm) | Z (mm) | B (degree) | C (degree) |
| 1 | −50 | −33.33 | −50 | −80 | −120 | 2 | −50 | −33.33 | 50 | −80 | 120 | 3 | −50 | 33.33 | −50 | 80 | −120 | 4 | −50 | 33.33 | 50 | 80 | 120 | 5 | −25 | −16.67 | −25 | −40 | −60 | 6 | −25 | −16.67 | 25 | −40 | 60 | 7 | −25 | 16.67 | −25 | 40 | −60 | 8 | −25 | 16.67 | 25 | 40 | 60 | 9 | 0 | 0 | 0 | 0 | 0 | 10 | 25 | −16.67 | −25 | −40 | −60 | 11 | 25 | −16.67 | 25 | −40 | 60 | 12 | 25 | 16.67 | −25 | 40 | −60 | 13 | 25 | 16.67 | 25 | 40 | 60 | 14 | 50 | −33.33 | −50 | −80 | −120 | 15 | 50 | −33.33 | 50 | −80 | 120 | 16 | 50 | 33.33 | −50 | 80 | −120 | 17 | 50 | 33.33 | 50 | 80 | 120 |
|
|