Review Article

[Retracted] Internet of Things (IoT)-Enabled Unmanned Aerial Vehicles for the Inspection of Construction Sites: A Vision and Future Directions

Table 2

Summary of all research findings.

Sr.Research findingsReferences

1On-board controller for IoT-enabled UAVs requires high power consumption because of several tasks.[104]
2One should come up with hybrid predictive learning algorithms based on quantitative and qualitative analysis for fault identification.[105]
3UAVs with usually have 20–30 minutes to fly in the sky which is very less time for monitoring any construction site. Thus, we need some smart mobility strategies.[7, 106, 107]
4For LiDAR-based reconstruction techniques, there is always huge time requirement, and thus, this is not recommended for large construction sites.[108, 109]
5There is also an immediate need to improve the communication between ground control room and UAVs.[110]