Table of Contents Author Guidelines Submit a Manuscript

Citations to this Journal [26,166 citations: 101–200 of 20,576 articles]

Articles published in Mathematical Problems in Engineering have been cited 26,166 times. The following is a list of the 20,576 articles that have cited the articles published in Mathematical Problems in Engineering.

  • Heng Shi, Yanbing Liang, and Zhaohui Liu, “An approach to the dynamic modeling and sliding mode control of the constrained robot,” Advances in Mechanical Engineering, vol. 9, no. 2, pp. 168781401769047, 2017. View at Publisher · View at Google Scholar
  • Guoxin Zhang, and Yongrong Qiu, “Stress and damage in concrete induced by pipe cooling at mesoscopic scale,” Advances in Mechanical Engineering, vol. 9, no. 2, 2017. View at Publisher · View at Google Scholar
  • Hai Zhu, Yanjin Li, Ying Zhu, Qian Huang, and Xia Luo, “Comparing the efficiency and robustness of state-of-the-art experimental designs for stated choice modeling: A simulation analysis,” Advances in Mechanical Engineering, vol. 9, no. 2, 2017. View at Publisher · View at Google Scholar
  • Syed Tauseef Mohyud-Din, Hassan Khan, Muhammad Arif, and Muhammad Rafiq, “Chebyshev wavelet method to nonlinear fractional Volterra–Fredholm integro-differential equations with mixed boundary conditions,” Advances in Mechanical Engineering, vol. 9, no. 3, pp. 168781401769480, 2017. View at Publisher · View at Google Scholar
  • Bo Dong, Yan Li, and Keping Liu, “Decentralized control for harmonic drive–based modular and reconfigurable robots with uncertain environment contact,” Advances in Mechanical Engineering, vol. 9, no. 4, pp. 168781401769604, 2017. View at Publisher · View at Google Scholar
  • Bo Fan, Xian-Bo Wang, Zhi-Xin Yang, Lu Song, and Shu-Zhong Song, “Direct power control in pulse-width modulation rectifier based on virtual flux estimation,” Advances in Mechanical Engineering, vol. 9, no. 5, pp. 168781401769914, 2017. View at Publisher · View at Google Scholar
  • Wei Lv, Limin Tao, and Yongpan Hu, “On the real-time calculation of the forward kinematics of a suspended cable?driven parallel mechanism with 6-degree-of-freedom wave compensation,” Advances in Mechanical Engineering, vol. 9, no. 6, pp. 168781401770626, 2017. View at Publisher · View at Google Scholar
  • Jianguo Guo, Yuchao Liu, Cheng Cheng, and Jun Zhou, “Disturbance attenuation–based sliding mode control with disturbance observer for mismatched uncertain system,” Advances in Mechanical Engineering, vol. 9, no. 8, pp. 168781401771497, 2017. View at Publisher · View at Google Scholar
  • Fengyu Liu, Li Chen, Chengliang Fang, Chengliang Yin, and Xi Zhang, “Modeling and experimental validation of lever-based electromechanical actuator for dry clutches,” Advances in Mechanical Engineering, vol. 9, no. 8, pp. 168781401771519, 2017. View at Publisher · View at Google Scholar
  • Yin-Mou Shen, and Ruey-Maw Chen, “Optimal multi-depot location decision using particle swarm optimization,” Advances in Mechanical Engineering, vol. 9, no. 8, pp. 168781401771766, 2017. View at Publisher · View at Google Scholar
  • Nan Shao, Guofeng Yao, Chang Zhang, and Min Wang, “A research into the flow and vortex structures around vehicles during overtaking maneuver with lift force included,” Advances in Mechanical Engineering, vol. 9, no. 9, pp. 168781401773289, 2017. View at Publisher · View at Google Scholar
  • Zhongyuan Jiang, Xiaoliang Chen, and Mingwei Tang, “A supervisory control strategy for the detection and restoration of power transmission failures during peak periods using Petri nets,” Advances in Mechanical Engineering, vol. 9, no. 10, pp. 168781401773324, 2017. View at Publisher · View at Google Scholar
  • Bo Fan, Zhi-Xin Yang, Xian-Bo Wang, Lu Song, and Shu-Zhong Song, “Model reference adaptive vector control for induction motor without speed sensor,” Advances in Mechanical Engineering, vol. 9, no. 1, pp. 168781401668308, 2017. View at Publisher · View at Google Scholar
  • Jing-Yi Lu, Dong Ye, and Wen-Ping Ma, “Time delay estimation based on variational mode decomposition,” Advances in Mechanical Engineering, vol. 9, no. 1, pp. 1–6, 2017. View at Publisher · View at Google Scholar
  • Zhenbao Liu, Xianwei Liu, Xiaobao Han, and Huacong Li, “Output feedback controller design for polynomial linear parameter varying system via parameter-dependent Lyapunov functions,” Advances in Mechanical Engineering, vol. 9, no. 2, 2017. View at Publisher · View at Google Scholar
  • Ramoshweu Solomon Lebelo, Oluwole Daniel Makinde, and T Chinyoka, “Thermal decomposition analysis in a sphere of combustible materials,” Advances in Mechanical Engineering, vol. 9, no. 2, pp. 168781401769251, 2017. View at Publisher · View at Google Scholar
  • YiFan Hou, and Kamel Barkaoui, “Deadlock analysis and control based on Petri nets: A siphon approach review,” Advances in Mechanical Engineering, vol. 9, no. 5, pp. 168781401769354, 2017. View at Publisher · View at Google Scholar
  • Xiao Lin Li, and Li Ming Zhou, “An element-free Galerkin method for electromechanical coupled analysis in piezoelectric materials with cracks,” Advances in Mechanical Engineering, vol. 9, no. 2, 2017. View at Publisher · View at Google Scholar
  • Xing Zhao, Yan Li, and Han Xia, “Behavior decision model for park-and-ride facilities utilization,” Advances in Mechanical Engineering, vol. 9, no. 7, pp. 168781401770890, 2017. View at Publisher · View at Google Scholar
  • Fengyu Liu, Li Chen, Dongxu Li, Jianlong Zhang, and Chengliang Yin, “Modeling and simulation study of a novel electromechanical clutch actuation system,” Advances in Mechanical Engineering, vol. 9, no. 8, pp. 168781401772040, 2017. View at Publisher · View at Google Scholar
  • Yuefei Liu, Jianxu Zhou, and Daqing Zhou, “Transient flow analysis in axial-flow pump system during stoppage,” Advances in Mechanical Engineering, vol. 9, no. 9, pp. 168781401772328, 2017. View at Publisher · View at Google Scholar
  • Jixin Wang, Yan Li, and Zhujin Jiang, “Non-parametric load extrapolation based on load extension for semi-axle of wheel loader,” Advances in Mechanical Engineering, vol. 9, no. 3, 2017. View at Publisher · View at Google Scholar
  • Zhifeng Wang, and Yan-Jun Liu, “Active contour model by combining edge and region information discrete dynamic systems,” Advances in Mechanical Engineering, vol. 9, no. 3, pp. 168781401769294, 2017. View at Publisher · View at Google Scholar
  • Lisheng Jin, Linlin Gao, Yuying Jiang, Mei Chen, Yi Zheng, and Keyong Li, “Research on the control and coordination of four-wheel independent driving/steering electric vehicle,” Advances in Mechanical Engineering, vol. 9, no. 4, pp. 168781401769887, 2017. View at Publisher · View at Google Scholar
  • Rui Li, and Peter J Jin, “Transit signal priority optimization for urban traffic network considering arterial coordinated signal control,” Advances in Mechanical Engineering, vol. 9, no. 8, pp. 168781401770059, 2017. View at Publisher · View at Google Scholar
  • Yanqiang Liu, Yu Shang, and Jianshen Wang, “Mathematical analysis of the meshing performance of planetary roller screws applying different roller thread shapes,” Advances in Mechanical Engineering, vol. 9, no. 5, 2017. View at Publisher · View at Google Scholar
  • Xue-lian Zheng, Hao Zhang, Yuan-yuan Ren, Ze-hong Wei, and Xi-gang Song, “Rollover stability analysis of tank vehicles based on the solution of liquid sloshing in partially filled tanks,” Advances in Mechanical Engineering, vol. 9, no. 6, pp. 168781401770389, 2017. View at Publisher · View at Google Scholar
  • Guozhu Cheng, Sulu Zhang, Lixin Wu, and Lihui Qin, “Spacing and geometric design indexes of auxiliary lanes on two-lane highway in China,” Advances in Mechanical Engineering, vol. 9, no. 9, pp. 168781401772329, 2017. View at Publisher · View at Google Scholar
  • Yubin Wu, Hexin Zhang, Xiaoxiang Hu, Junjun Hui, Guoliang Li, and Xin Zhou, “Novel robust stability condition for uncertain neutral systems with mixed time-varying delays,” Advances in Mechanical Engineering, vol. 9, no. 10, pp. 168781401772379, 2017. View at Publisher · View at Google Scholar
  • Fuqiang Sun, Xiaoyang Li, Haitao Liao, and Xiankun Zhang, “A Bayesian least-squares support vector machine method for predicting the remaining useful life of a microwave component,” Advances in Mechanical Engineering, vol. 9, no. 1, pp. 168781401668596, 2017. View at Publisher · View at Google Scholar
  • Hyunjun Kim, Sung-Han Sim, Jaebeom Lee, Young-Joo Lee, and Jin-Man Kim, “Flood fragility analysis for bridges with multiple failure modes,” Advances in Mechanical Engineering, vol. 9, no. 3, 2017. View at Publisher · View at Google Scholar
  • Xi Wang, Tao Tang, and Hui He, “Optimal control of heavy haul train based on approximate dynamic programming,” Advances in Mechanical Engineering, vol. 9, no. 4, pp. 168781401769811, 2017. View at Publisher · View at Google Scholar
  • Ning He, Yan Qiao, NaiQi Wu, and Ting Qu, “Total completion time minimization for scheduling of two-machine flow shop with deterioration jobs and setup time,” Advances in Mechanical Engineering, vol. 9, no. 4, pp. 168781401769888, 2017. View at Publisher · View at Google Scholar
  • Shuaiby Mohamed, Tobias Rainer Schäfle, and Naoki Uchiyama, “Robust control of a redundant wheeled drive system for energy saving and fail safe motion,” Advances in Mechanical Engineering, vol. 9, no. 5, 2017. View at Publisher · View at Google Scholar
  • Faranak Rabiei, Fatin Abd Hamid, Mohammad M Rashidi, and Fudziah Ismail, “Numerical simulation of fuzzy differential equations using general linear method and B-series,” Advances in Mechanical Engineering, vol. 9, no. 9, pp. 168781401771541, 2017. View at Publisher · View at Google Scholar
  • Hassan Eltayeb, Said Mesloub, and Adem Kılıçman, “Application of double Laplace decomposition method to solve a singular one-dimensional pseudohyperbolic equation,” Advances in Mechanical Engineering, vol. 9, no. 8, pp. 168781401771663, 2017. View at Publisher · View at Google Scholar
  • Baeyoung Koo, Wookyong Kwon, Sangmoon Lee, and Chongsoo Lee, “Event-triggered proportional-derivative control for nonlinear network systems with a novel event-triggering scheme: Differential of triggered state consideration,” Advances in Mechanical Engineering, vol. 9, no. 9, pp. 168781401771794, 2017. View at Publisher · View at Google Scholar
  • Jingxin Dou, Qiansheng Tang, Laihong Zhou, and Bangchun Wen, “An adaptive sliding mode controller based on global asymptotic convergent observer for attitude tracking of quadrotor unmanned aerial vehicles,” Advances in Mechanical Engineering, vol. 9, no. 9, pp. 168781401772329, 2017. View at Publisher · View at Google Scholar
  • Xiaowan Liu, Dingzhi Peng, and Zongxue Xu, “Identification of the Impacts of Climate Changes and Human Activities on Runoff in the Jinsha River Basin, China,” Advances in Meteorology, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Yizhong Yang, Qiang Zhang, Pengfei Wang, Xionglou Hu, and Nengju Wu, “Moving Object Detection for Dynamic Background Scenes Based on Spatiotemporal Model,” Advances in Multimedia, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Ali Shirzadeh Chaleshtari, “Resource Tardiness Weighted Cost Minimization in Project Scheduling,” Advances in Operations Research, vol. 2017, pp. 1–11, 2017. View at Publisher · View at Google Scholar
  • Ogrizek, Rehar, Leber, and Buchmeister, “Concept of intelligent supporting information system for development of new appliances,” Advances in Production Engineering And Management, vol. 12, no. 2, pp. 196–204, 2017. View at Publisher · View at Google Scholar
  • Wasiu Opeyemi Oduola, and Cajetan M. Akujuobi, “Wavelet Transform for Image Compression Using Multi-Resolution Analytics: Application to Wireless Sensors Data,” Advances in Pure Mathematics, vol. 07, no. 08, pp. 430–440, 2017. View at Publisher · View at Google Scholar
  • Jiachao Chang, Lin Shang, and Guotong Li, “The research on system error of Inter-Satellite-Link (ISL) measurements for autonomous navigation of Beidou system,” Advances in Space Research, 2017. View at Publisher · View at Google Scholar
  • Ennio Condoleo, Marco Cinelli, Emiliano Ortore, and Christian Circi, “Stable orbits for lunar landing assistance,” Advances in Space Research, 2017. View at Publisher · View at Google Scholar
  • Shengxian Yu, Changyin Zhao, and Wei Zhang, “The secular analytical solution of the orbital plane using Lindstedt-Poincaré method,” Advances in Space Research, 2017. View at Publisher · View at Google Scholar
  • Xiaosong Liu, Zebiao Shan, and Yuanchun Li, “Dynamic boundary layer based neural network quasi-sliding mode control for soft touching down on asteroid,” Advances in Space Research, vol. 59, no. 8, pp. 2173–2185, 2017. View at Publisher · View at Google Scholar
  • Eniuce Menezes Souza, and Tamiris Trevisan Negri, “First prospects in a new approach for structure monitoring from GPS multipath effect and wavelet spectrum,” Advances in Space Research, vol. 59, no. 10, pp. 2536–2547, 2017. View at Publisher · View at Google Scholar
  • Ye, Liu, and Ni, “Probabilistic corrosion fatigue life assessment of a suspension bridge instrumented with long-term structural health monitoring system,” Advances in Structural Engineering, vol. 20, no. 5, pp. 674–681, 2017. View at Publisher · View at Google Scholar
  • Bin Chen, Dongyan Wu, Xu Xie, and Pengzhen Lu, “Comfort assessment for a pedestrian passageway suspended under a girder bridge with random traffic flows,” Advances in Structural Engineering, vol. 20, no. 2, pp. 225–234, 2017. View at Publisher · View at Google Scholar
  • Yu Hu, Qingbin Li, Guohe Liang, and Zheng Zuo, “A monitoring-mining-modeling system and its application to the temperature status of the Xiluodu arch dam,” Advances in Structural Engineering, vol. 20, no. 2, pp. 235–244, 2017. View at Publisher · View at Google Scholar
  • Yuanqiang Ren, Shenfang Yuan, Lei Qiu, and Hanfei Mei, “Impact localization by a multi-radio sink–based wireless sensor network for large-scale structures,” Advances in Structural Engineering, vol. 20, no. 2, pp. 157–169, 2017. View at Publisher · View at Google Scholar
  • Shaohua Li, and Jianying Ren, “Investigation on three-directional dynamic interaction between a heavy-duty vehicle and a curved bridge,” Advances in Structural Engineering, pp. 136943321772951, 2017. View at Publisher · View at Google Scholar
  • Bruns, Stipp, and Sørensen, “Looking for the Signal: A guide to iterative noise and artefact removal in X-ray tomographic reconstructions of porous geomaterials,” Advances in Water Resources, vol. 105, pp. 96–107, 2017. View at Publisher · View at Google Scholar
  • M. Sakthi Asvini, and Dr. T. Amudha, “Design And Development Of Bio-Inspired Framework For Reservoir Operation Optimization,” Advances in Water Resources, 2017. View at Publisher · View at Google Scholar
  • Chao Liu, Gang Wang, Jianlei Lang, Shuiyuan Cheng, and Wei Wen, “Development and application of a new PM2.5 source apportionment approach,” Aerosol and Air Quality Research, vol. 17, no. 1, pp. 340–350, 2017. View at Publisher · View at Google Scholar
  • Xin Wang, and Shuli Sun, “Optimal recursive estimation for networked descriptor systems with packet dropouts, multiplicative noises and correlated noises,” Aerospace Science and Technology, vol. 63, pp. 41–53, 2017. View at Publisher · View at Google Scholar
  • Zappino, Carrera, and Viglietti, “The analysis of tapered structures using a component-wise approach based on refined one-dimensional models,” Aerospace Science and Technology, vol. 65, pp. 141–156, 2017. View at Publisher · View at Google Scholar
  • Zhiqiang Ma, Guanghui Sun, and Zhengkai Li, “Dynamic adaptive saturated sliding mode control for deployment of tethered satellite system,” Aerospace Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Xiao Pan, Ming Xu, and Ramil Santos, “Trajectory optimization for solar sail in cislunar navigation constellation with minimal lightness number,” Aerospace Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Chuanqi Lu, Shaoping Wang, and Xingjian Wang, “A multi-source information fusion fault diagnosis for aviation hydraulic pump based on the new evidence similarity distance,” Aerospace Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Xiangwei Bu, Yu Xiao, and Ke Wang, “A prescribed performance control approach guaranteeing small overshoot for air-breathing hypersonic vehicles via neural approximation,” Aerospace Science and Technology, vol. 71, pp. 485–498, 2017. View at Publisher · View at Google Scholar
  • Yanbo Sun, Rui Xue, and Danfeng Zhao, “Time domain raised cosine-binary coded symbol modulation for satellite navigation,” Aerospace Science and Technology, vol. 66, pp. 59–69, 2017. View at Publisher · View at Google Scholar
  • Ting Yue, Xiangyang Zhang, Lixin Wang, and Junqiang Ai, “Flight dynamic modeling and control for a telescopic wing morphing aircraft via asymmetric wing morphing,” Aerospace Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Jiaqing Kou, and Weiwei Zhang, “Multi-kernel neural networks for nonlinear unsteady aerodynamic reduced-order modeling,” Aerospace Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Gagandeep Kaur, A.Q. Ansari, and M.S. Hashmi, “Fractional Order Multifunction Filter with 3 Degrees of Freedom,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • M.N. Kapetina, M.R. Rapaić, and Z.D. Jeličić, “Two-stage adaptive estimation of irrational linear systems,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • Viet-Thanh Pham, Sifeu Takougang Kingni, Christos Volos, Sajad Jafari, and Tomasz Kapitaniak, “A simple three-dimensional fractional-order chaotic system without equilibrium: Dynamics, circuitry implementation, chaos control and synchronization,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • David Kubanek, and Todd Freeborn, “(1+ α ) Fractional-Order Transfer Functions to Approximate Low-Pass Magnitude Responses with Arbitrary Quality Factor,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • V. De Santis, V. Martynyuk, A. Lampasi, M. Fedula, and M.D. Ortigueira, “Fractional-Order Circuit Models of the Human Body Impedance for Compliance Tests against Contact Currents,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • Ahmed Soltan, Ahmed M. Soliman, and Ahmed G. Radwan, “Fractional-Order Impedance Transformation Based on Three Port Mutators,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • Nguyen Xuan Quyen, “On the performance of low-rate wireless correlation-delay-shift-keying system,” AEU - International Journal of Electronics and Communications, vol. 71, pp. 37–44, 2017. View at Publisher · View at Google Scholar
  • Costas Vastarouchas, Georgia Tsirimokou, Todd J. Freeborn, and Costas Psychalinos, “Emulation of an electrical-analogue of a fractional-order human respiratory mechanical impedance model using OTA topologies,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • Manoj Kumar Shukla, and Bharat Bhushan Sharma, “Investigation of Chaos in Fractional Order Generalized Hyperchaotic Henon Map,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • Jerzy Baranowski, Mariusz Pauluk, and Andrzej Tutaj, “Analog Realization of Fractional Filters: Laguerre Approximation Approach,” AEU - International Journal of Electronics and Communications, 2017. View at Publisher · View at Google Scholar
  • Ayşe Zeynep Azak, and Melek Masal, “On special type-2 Bishop motion and Bishop Darboux rotation axes of the space curve,” Afrika Matematika, 2017. View at Publisher · View at Google Scholar
  • Mohamed Boualem, Mouloud Cherfaoui, Natalia Djellab, and Djamil Aïssani, “Inégalités stochastiques pour le modèle d’attente M/G/1/1 avec rappels,” Afrika Matematika, 2017. View at Publisher · View at Google Scholar
  • Adam Majchrzak, and Bazyli Czyzewski, “Economic size of farms and adjustments of the total factor productivity to the business cycle in Polish agriculture,” Agricultural Economics (Czech Republic), vol. 63, no. 2, pp. 93–102, 2017. View at Publisher · View at Google Scholar
  • Guillermo Jimenez-Diaz, Pedro Pablo G?mez Mart?n, Marco Antonio G?mez Mart?n, and Antonio A. S?nchez-Ruiz, “Similarity metrics from social network analysis for content recommender systems,” AI Communications, pp. 1–12, 2017. View at Publisher · View at Google Scholar
  • S. Hemalatha, and S. Margret Anouncia, “G-L fractional differential operator modified using auto-correlation function: Texture enhancement in images,” Ain Shams Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Ahmad Barzkar, and Hojatollah Adibi, “Propagation of longitudinal viscoelastic stress waves in a fluid saturated Voigt porous medium,” Ain Shams Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Mohammed Al-Smadi, “Simplified iterative reproducing kernel method for handling time-fractional BVPs with error estimation,” Ain Shams Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Hoo Yann Seong, and Zanariah Abdul Majid, “Solving second order delay differential equations using direct two-point block method,” Ain Shams Engineering Journal, vol. 8, no. 1, pp. 59–66, 2017. View at Publisher · View at Google Scholar
  • Azhar Ali Zafar, Nehad Ali Shah, and Niat Nigar, “On some rotational flows of non-integer order rate type fluids with shear stress on the boundary,” Ain Shams Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Faiza Naseem, Anum Shafiq, Lifeng Zhao, and Anum Naseem, “MHD biconvective flow of Powell Eyring nanofluid over stretched surface,” AIP Advances, vol. 7, no. 6, pp. 065013, 2017. View at Publisher · View at Google Scholar
  • Jiu-Ling Xue, Huan Liu, Ting Liu, Fu-Hou Zheng, Ya-Xian Fan, and Zhi-Yong Tao, “Interactions between the first mode and the second Bragg gap in a cylindrical waveguide with undulated walls,” AIP Advances, vol. 7, no. 10, pp. 105011, 2017. View at Publisher · View at Google Scholar
  • Anas Altaleb, Muhammad Sarwar Saeed, Iqtadar Hussain, and Muhammad Aslam, “An algorithm for the construction of substitution box for block ciphers based on projective general linear group,” AIP Advances, vol. 7, no. 3, pp. 035116, 2017. View at Publisher · View at Google Scholar
  • Hongmin Deng, and Dongping Wang, “Circuit simulation and physical implementation for a memristor-based colpitts oscillator,” AIP Advances, vol. 7, no. 3, pp. 035118, 2017. View at Publisher · View at Google Scholar
  • Shiping Jiang, and Lei Cheng, “Modeling and design of a pre-stressed piezoelectric stack actuator,” AIP Advances, vol. 7, no. 7, pp. 075114, 2017. View at Publisher · View at Google Scholar
  • Piergiovanni Marzocca, and Alessandro Ceruti, “Heuristic optimization of Bezier curves based trajectories for unconventional airships docking,” Aircraft Engineering and Aerospace Technology, vol. 89, no. 1, pp. 76–86, 2017. View at Publisher · View at Google Scholar
  • A.G. Madaki, R. Roslan, M.S. Rusiman, and C.S.K. Raju, “Analytical and numerical solutions of squeezing unsteady Cu and TiO 2 -nanofluid flow in the presence of thermal radiation and heat generation/absorption,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • M.J. Uddin, A. Sohail, O. Anwar Bég, and A.I.Md. Ismail, “Numerical solution of MHD slip flow of a nanofluid past a radiating plate with Newtonian heating: A Lie group approach,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Salahuddin, Arif Hussain, Bilal, Malik, Awais, and Imad Khan, “MHD squeezed flow of Carreau-Yasuda fluid over a sensor surface,” Alexandria Engineering Journal, vol. 56, no. 1, pp. 27–34, 2017. View at Publisher · View at Google Scholar
  • B. Ramandevi, J.V. Ramana Reddy, V. Sugunamma, and N. Sandeep, “Combined influence of viscous dissipation and non-uniform heat source/sink on MHD non-Newtonian fluid flow with Cattaneo-Christov heat flux,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • C. Sulochana, G.P. Ashwinkumar, and N. Sandeep, “Effect of frictional heating on mixed convection flow of chemically reacting radiative Casson nanofluid over an inclined porous plate,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Basant K. Jha, and Bello J. Gwandu, “MHD free convection flow in a vertical slit micro-channel with super-hydrophobic slip and temperature jump: Heating by constant wall temperature,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Davoud Sedighizadeh, and Houman Mazaheripour, “Optimization of multi objective vehicle routing problem using a new hybrid algorithm based on particle swarm optimization and artificial bee colony algorithm considering Precedence constraints,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Rashid Mehmood, S. Rana, N.S. Akbar, and S. Nadeem, “Non-aligned stagnation point flow of radiating Casson fluid over a stretching surface,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • R. Kandasamy, Nur Atikah bt Adnan, and Radiah Mohammad, “Nanoparticle shape effects on squeezed MHD flow of water based Cu, Al 2 O 3 and SWCNTs over a porous sensor surface,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar
  • Muhammad Saqib, Farhad Ali, Ilyas Khan, Nadeem Ahmad Sheikh, Syed Aftab Alam Jan, and Samiulhaq, “Exact solutions for free convection flow of generalized Jeffrey fluid: A Caputo-Fabrizio fractional model,” Alexandria Engineering Journal, 2017. View at Publisher · View at Google Scholar