Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2007, Article ID 85150, 11 pages
Research Article

Experimental and Theoretical Investigations of Mouldability for Feedstocks Used in Powder Injection Moulding

1Department of Mechanical Technology, Faculty of Technology, Gazi University, Ankara, Teknikokullar 06500, Turkey
2Department of Mechanical Engineering, Faculty of Engineering, Kırıkkale University, Kırıkkale, Ankara 71450, Turkey

Received 11 September 2006; Accepted 8 March 2007

Academic Editor: Agostino Bruzzone

Copyright © 2007 Çetin Karataş et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Vincent Moreschi, Sylvain Lalot, Christian Courtois, and Anne Leriche, “Modelling the tap density of inorganic powders using neural networks,” Journal of the European Ceramic Society, vol. 29, no. 15, pp. 3105–3111, 2009. View at Publisher · View at Google Scholar
  • Kwangho Shin, Youngmoo Heo, Hyungpil Park, Sungho Chang, and Byungohk Rhee, “Development of Metal Plate with Internal Structure Utilizing the Metal Injection Molding (MIM) Process,” Materials, vol. 6, no. 12, pp. 5878–5892, 2013. View at Publisher · View at Google Scholar
  • D. A. Rodrigues, A. S. M. Oliveira, R. F. Specht, and R. M. C. Santana, “Development and mechanical characterization of a polypropylene (pp) composite with grinding sludge as fiber,” Proceedings of Pps-29: The 29th International Conference of The Polymer - C, vol. 1593, pp. 495–498, 2014. View at Publisher · View at Google Scholar