Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2011 (2011), Article ID 146054, 8 pages
http://dx.doi.org/10.1155/2011/146054
Research Article

Experimental and Numerical Simulations Predictions Comparison of Power and Efficiency in Hydraulic Turbine

1Centro de Investigacion en Ingeniería y Ciencias Aplicadas, Universidad Autonoma del Estado de Morelos, Avenida Universidad 1001, Col. Chamilpa, Cuernavaca, Morelos, CP 62209, Mexico
2The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, 80952 Gdansk, Poland
3Départament de Génie Mécanique, Ecole Polythecnique de Montreal, 2500 Chemin de Polytechnique, Montréal, QC, Canada H3T 1J4

Received 1 November 2010; Accepted 24 February 2011

Academic Editor: Guan Yeoh

Copyright © 2011 Laura Castro et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Castro, Análisis del flujo turbulento en un tubo de aspiración de turbina hidráulica, Tesis de maestría, UAEM-CIICAp, Cuernavaca, México, May 2008.
  2. J. Kubiak, G. Urquiza, A. Adamkowski, F. Sierra, W. Janicki, and R. Rangel, “Special instrumentation and hydraulic turbine flow measurements using a pressure-time method,” in Proceedings of the ASME Fluids Engineering Division Summer Conference, vol. 2, pp. 433–439, Houston, Tex, USA, June 2005.
  3. N. R. Gibson, “The Gibson method and apparatus for measuring the flow of water in closed conduits,” ASME Power Division, pp. 343–392, 1923. View at Google Scholar
  4. G. Urquiza, J. Kubiak, A. Adamkoswki, and W. Janicki, “Resultados de medición de flujo y cálculo de eficiencia de la unidad no. 4 en la C. H. Temascal,” Tech. Rep. 77P/DM/CIICAp.
  5. IEC 41, International Standard: Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines, 1991.
  6. A. Adamkowski, W. Janicki, J. Kubiak, G. Urquiza, E. F. Sierra, and R. Rangel, “Water turbine efficiency measurements using the gibson method based on special instrumentation installed inside pipelines,” in Proceedings of the 6th International Conference on Innovation in Hydraulic Efficiency Measurements, Portland, Ore, USA, July-August 2006.
  7. P. J. Roache, Fundamentals of Computational Fluid Dynamics, Hermosa Publishers, Albuquerque, NM, USA, 1998.
  8. S. Mauri, Numerical simulation and flow analysis of an elbow diffuser, Ph.D. thesis, Ecole Polithecnique Fédérale de Lausanne, Lausanne, Switzerland, 2002, Tesis Doctoral no. 2527.
  9. T. C. Vu and W. Shyy, “Navier-Stokes flow analysis for hydraulic turbine draft tubes,” Journal of Fluids Engineering, Transactions of the ASME, vol. 112, no. 2, pp. 199–204, 1990. View at Google Scholar · View at Scopus
  10. M. Agouzoul, M. Reggio, and R. Camarero, “Calculation of turbulent flows in a hydraulic turbine draft tube,” Journal of Fluids Engineering, Transactions of the ASME, vol. 112, no. 3, pp. 257–263, 1990. View at Google Scholar · View at Scopus