Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2017 (2017), Article ID 1015494, 9 pages
https://doi.org/10.1155/2017/1015494
Research Article

Research on Distribution of Flow Field and Simulation of Working Pulsation Based on Rotating-Sleeve Distributing-Flow System

1Mechanical and Electrical Engineering College, Qingdao University, Qingdao 266071, China
2Power Integration and Energy Storage Systems Engineering Technology Center, Qingdao University, Qingdao 266071, China

Correspondence should be addressed to Hongxin Zhang; moc.621@xhzudq and Qinghai Zhao; moc.361@tibhqz

Received 21 May 2017; Revised 2 August 2017; Accepted 9 August 2017; Published 1 November 2017

Academic Editor: Agostino Bruzzone

Copyright © 2017 Yanjun Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Zhang, J. Ma, H. Hong, H. Yang, and Y. Fang, “Analysis of the flow dynamics characteristics of an axial piston pump based on the computational fluid dynamics method,” Engineering Applications of Computational Fluid Mechanics, vol. 11, no. 1, pp. 86–95, 2017. View at Publisher · View at Google Scholar · View at Scopus
  2. F. Yin, S. Nie, W. Hou, and S. Xiao, “Effect analysis of silencing grooves on pressure and vibration characteristics of seawater axial piston pump,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231, no. 8, pp. 1390–1409, 2017. View at Publisher · View at Google Scholar
  3. C. Olendraru, A. Sellier, M. Rossi, and P. Huerre, “Inviscid instability of the Batchelor vortex: absolute-convective transition and spatial branches,” Physics of Fluids, vol. 11, no. 7, pp. 1805–1820, 1999. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  4. I. Delbende, J.-M. Chomaz, and P. Huerre, “Absolute/convective instabilities in the Batchelor vortex: a numerical study of the linear impulse response,” Journal of Fluid Mechanics, vol. 355, pp. 229–254, 1998. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  5. B. Xu, K.-M. Lee, Y. Song, Q. Wang, and H. Yang, “A numerical and experimental investigation of parametric effect on flow ripple,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 229, no. 16, pp. 2939–2951, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. P. Dhananchezhiyan and S. S. Hiremath, “Optimization of Multiple Micro Pumps to Maximize the Flow Rate and Minimize the Flow Pulsation,” Procedia Technology, vol. 25, pp. 1226–1233, 2016. View at Publisher · View at Google Scholar
  7. K. YU, Y.-G. CHENG, and X.-X. ZHANG, “Hydraulic characteristics of a siphon-shaped overflow tower in a long water conveyance system: CFD simulation and analysis,” Journal of Hydrodynamics, vol. 28, no. 4, pp. 564–575, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Luo, Y. Chen, H. Yang, and Y. Wang, “Study on an internally-cooled liquid desiccant dehumidifier with CFD model,” Applied Energy, vol. 194, pp. 399–409, 2017. View at Publisher · View at Google Scholar
  9. J. Ma, B. Xu, B. Zhang, and H. Yang, “Flow ripple of axial piston pump with computational fluid dynamic simulation using compressible hydraulic oil,” Chinese Journal of Mechanical Engineering (English Edition), vol. 23, no. 1, pp. 45–52, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. M. A. Delele, F. Weigler, G. Franke, and J. Mellmann, “Studying the solids and fluid flow behavior in rotary drums based on a multiphase CFD model,” Powder Technology, vol. 292, pp. 260–271, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Wang, “The analysis of cavitation problems in the axial piston pump,” Journal of Fluids Engineering, Transactions of the ASME, vol. 132, no. 7, pp. 0745021–0745026, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. L. L. Guo, J. Geng, S. Shi, and G. S. Du, “Study of the phenomenon of water hammer based on sliding mesh method,” Applied Mechanics and Materials, vol. 525, pp. 236–239, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. P. L. Vitagliano, M. Minervino, D. Quagliarella, and P. Catalano, “A conservative sliding mesh coupling procedure for U-RANS flow simulations,” Aircraft Engineering and Aerospace Technology, vol. 88, no. 1, pp. 151–158, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Lee, C. S. Tan, B. T. Sirakov et al., “Performance Characterization of Twin-Scroll Turbine Stage for Vehicular Turbocharger Under Unsteady Pulsating Flow Environment,” Journal of Engineering for Gas Turbines and Power, vol. 139, no. 7, p. 072701, 2017. View at Publisher · View at Google Scholar
  15. J. Lee, C. S. Tan, B. T. Sirakov et al., “Performance Metric for Turbine Stage Under Unsteady Pulsating Flow Environment,” Journal of Engineering for Gas Turbines and Power, vol. 139, no. 7, p. 072606, 2017. View at Publisher · View at Google Scholar
  16. M. V. C. Alves, J. R. Barbosa Jr., and A. T. Prata, “Analytical and CFD modeling of the fluid flow in an eccentric-tube centrifugal oil pump for hermetic compressors,” International Journal of Refrigeration, vol. 36, no. 7, pp. 1905–1915, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. M. E. Pettersson, K. G. Weddfelt, and J.-O. S. Palmberg, “Methods of reducing flow ripple from fluid power pumps - A theoretical approach,” SAE Technical Papers, 1991. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Johansson, J. O. Palmberg, and K. E. Rydberg, “Cross angle design feature for reducing noise and vibrations in hydrostatic piston pumps,” in Proceedings of the Fifth International Conference on Fluid Power Transmission and Control, 2001.
  19. K. A. Harrison and K. A. Edge, “Reduction of axial piston pump pressure ripple,” Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol. 214, no. 1, pp. 53–64, 2005. View at Publisher · View at Google Scholar
  20. C. Guan, Z. Jiao, and S. He, “Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate,” Chinese Journal of Aeronautics, vol. 27, no. 1, pp. 169–181, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. F. Kong, X. Shen, W. Wang, and S. Zhou, “Performance study based on inner flow field numerical simulation of magnetic drive pumps with different rotate speeds,” Chinese Journal of Mechanical Engineering, vol. 25, no. 1, pp. 137–143, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. M. M. Athavale, H. Y. Li, Y. U. Jiang, and A. K. Singhal, “Application of the full cavitation model to pumps and inducers,” International Journal of Rotating Machinery, vol. 8, no. 1, pp. 45–56, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. B. E. Aunder and D. B. Spai, Lectures in Mathematical Models of Turbulence, Academic Press, London, UK, 1972.
  24. J. E. Ma, Study on Flow Ripple and Valve Plate Optimization of Axial Piston Pump, Zhejiang University, Zhejiang, China, 2009.