Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2017, Article ID 3012949, 8 pages
https://doi.org/10.1155/2017/3012949
Research Article

Numerical Analysis of Joule Heating Behavior and Residual Compressive Stress around Crack Tip under High Electric Load

Department of Mechanical Engineering, Ming Chi University of Technology, Taishan, New Taipei City, Taiwan

Correspondence should be addressed to Thomas Jin-Chee Liu; wt.ude.tucm.liam@eehcnij

Received 20 July 2017; Accepted 14 September 2017; Published 19 October 2017

Academic Editor: Dimitrios E. Manolakos

Copyright © 2017 Thomas Jin-Chee Liu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. V. Z. Parton and B. A. Kudryavtsev, Electromagnetoelasticity, Gordon and Breach, New York, NY, USA, 1988.
  2. B. A. Kudryavtsev, V. Z. Parton, and B. D. Rubinskii, “Electromagnetic and thermoelastic fields in a conducting plate with a cut of finite length,” Mechanics of Solids, vol. 17, pp. 110–118, 1982. View at Google Scholar · View at Scopus
  3. D. Hasanyan, L. Librescu, Z. Qin, and R. D. Young, “Thermoelastic cracked plates carrying nonstationary electrical current,” Journal of Thermal Stresses, vol. 28, no. 6-7, pp. 729–745, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Qin, L. Librescu, and D. Hasanyan, “Joule heating and its implications on crack detection/arrest in electrically conductive circular cylindrical shells,” Journal of Thermal Stresses, vol. 30, no. 6, pp. 623–637, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. G. X. Cai and F. G. Yuan, “Electric current-induced stresses at the crack tip in conductors,” International Journal of Fracture, vol. 96, pp. 279–301, 1996. View at Google Scholar
  6. G. X. Cai and F. G. Yuan, “Stresses around the crack tip due to electric current and self-induced magnetic field,” Advances in Engineering Software, vol. 29, no. 3-6, pp. 297–306, 1998. View at Publisher · View at Google Scholar · View at Scopus
  7. F. u. YM, X. Z. Bai, G. Y. Qiao, H. u. YD, and J. Y. Luan, “Technique for producing crack arrest by electromagnetic heating,” Materials Science and Technology, vol. 17, pp. 1653–2656, 2001. View at Google Scholar
  8. X. Z. Bai, Z. G. Tian, and J. Zheng, Thermo-electric effects in fracture mechanics, National Defense Industry Press, China, 2009 (Chinese).
  9. T. J. C. Liu, “Thermo-electro-structural coupled analyses of crack arrest by Joule heating,” Theoretical and Applied Fracture Mechanics, vol. 49, no. 2, pp. 171–184, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. T. J. C. Liu, “Finite element modeling of melting crack tip under thermo-electric Joule heating,” Engineering Fracture Mechanics, vol. 78, no. 4, pp. 666–684, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. T. J. C. Liu, “Crack detection/arrest with Joule heating,” in Encyclopedia of Thermal Stresses, R. B. Hetnarski, Ed., Springer Science + Business Media Dordrecht, Dordrecht, Netherlands, 2013. View at Google Scholar
  12. T. J.-C. Liu, “Joule heating behaviors around through crack emanating from circular hole under electric load,” Engineering Fracture Mechanics, vol. 123, pp. 2–20, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. C. L. Tsai, W. L. Dai, and D. W. Dickinson, “Analysis and development of a real-time control methodology in resistance spot welding,” Welding Journal, vol. 70, pp. s339–s351, 1991. View at Google Scholar
  14. D. K. Cheng, Field and Wave Electromagnetics, Addison-Wesley, MA, USA, 1983.
  15. F. P. Incropera and D. P. DeWitt, Fundamentals of Heat and Mass Transfer, John Wiley & Sons, 5th edition, 2002.
  16. A. P. Boresi and K. P. Chong, Elasticity in Engineering Mechanics, John Wiley & Sons, New York, NY, USA, 2nd edition, 2000.
  17. O. C. Zienkiewicz and R. L. Taylor, The Finite Element Method, vol. 2, McGraw-Hill, New York, 4th edition, 1991.
  18. ANSYS Inc., ANSYS 16.2 Mechanical APDL Theory Reference, SAS IP, 2015.
  19. R. S. Barsoum, “On the use of isoparametric finite elements in linear fracture mechanics,” International Journal for Numerical Methods in Engineering, vol. 10, no. 1, pp. 25–37, 1976. View at Publisher · View at Google Scholar · View at Scopus
  20. X. Sun and P. Dong, “Analysis of aluminum resistance spot welding processes using coupled finite element procedures,” Welding Journal, vol. 79, pp. s215–s221, 2000. View at Google Scholar
  21. G. C. Sih, Handbook of Stress Intensity Factors, Lehigh University, Pennsylvania, Pa, USA, 1973.