One-Pot Synthesis of Metallopyrazinoporphyrazines Using 2,3-Diaminomaleonitrile and 1,2-Dicarbonyl Compounds Accelerated by Microwave Irradiation

Maleki, Ali; Rezayan, Ali Hossein

doi:https://doi.org/10.1155/2014/958951

Organic Chemistry International

On this page

Abstract Introduction Results and Discussion Experimental References Copyright Related Articles

Research Article | Open Access

Volume 2014 | Article ID 958951 | https://doi.org/10.1155/2014/958951

One-Pot Synthesis of Metallopyrazinoporphyrazines Using 2,3-Diaminomaleonitrile and 1,2-Dicarbonyl Compounds Accelerated by Microwave Irradiation

Ali Maleki¹and Ali Hossein Rezayan²

Academic Editor: Vito Ferro

Received30 Oct 2013

Revised07 Jan 2014

Accepted28 Jan 2014

Published27 Feb 2014

Abstract

A one-pot microwave-assisted synthesis of metallopyrazinoporphyrazines as porphyrazine derivatives carrying six-membered pyrazine rings annulated at the periphery of the tetrapyrrolic macrocycle is described starting from 2,3-diaminomaleonitrile, 1,2-dicarbonyl compounds, metal salts, and urea.

1. Introduction

Tetrapyrrolic macrocycles of porphyrins, phthalocyanines, and related compounds, modified by the attachment of peripheral substituents, have attracted significant attention for many years because of their industrial applications in diverse areas, especially in modern technologies [1–4], such as elaboration of Langmuir-Blodgett films [5–7], chemical sensors [8, 9], nonlinear optical materials [10–12] biomedical agents for diagnosis, and therapy [13] as well as sensitizers in solar cells [14–16].

Porphyrazines (Pzs), as an important class of phthalocyanine analogues or porphyrinoid macrocycles, carrying heterocyclic rings, such as diazepine, pyridine, and pyrazine rings, directly annulated to the pyrrole rings of the porphyrazine core, have been presented in recent years as optical agents with clear advantages over the porphyrins [17–25]. Porphyrins are either naturally occurring molecular systems or original synthetic products, whereas Pzs are derived exclusively from synthetic laboratory work. An area of further expansion of new Pzs macrocycles can be directed to the synthesis of new phthalocyanines-like macrocycles opening a route to new forms of investigation and promising potential practical applications [26].

Metal complexes of Pzs (MPzs) ligands have been at the focus of interest because of their high electronic delocalization, biological significance, and numerous potential technological applications such as electronic, magnetic, photophysical, and photosensitizing properties of Pzs [27–31]. It has been found that functional groups fused to the peripheral positions of MPzs are integrated to the macrocyclic core more effectively than that of phthalocyanines [32–34]. It implies that the modification of the structure influences the photosensitizing properties [35].

There are only a few reports for the synthesis of Pzs under mild and efficient conditions. On the other hand, attempts for direct synthesis of Pzs carrying unprotected vicinal NH₂ groups from 2,3-diaminomaleodinitrile were unsuccessful [17–20]. Due to the importance of these macrocycles, introduction of new, efficient, and inexpensive protocol for this purpose is of prime importance.

Microwave-assisted organic reactions are well known as environmentally benign transformations that can improve a diverse area of chemical processes. In particular, the reaction time and energy input of these processes are assumed to be mostly reduced in comparison with reactions of a long duration at high temperatures under conventional heating conditions [36].

In continuation of our study to develop new procedures in various types of chemical transformations [37–41], herein, we wish to study the synthesis of MPPzs (5a–h) by a one-pot coupling reaction of 2,3-diaminomaleonitrile (1), various 1,2-dicarbonyl compounds (2), urea (3), and metal salts (4) under microwave irradiation conditions (Scheme 1).

2. Results and Discussion

In a typical experiment, the synthesis of MPPzs was carried out by mixing 2,3-diaminomaleonitrile 1 (1 mmol) with 1,2-dicarbonyl compounds 2 (1 mmol), urea 3 (4 mmol), and metal salts 4 (0.5 mmol) under microwave irradiation conditions. In this step, the reaction conditions were optimized with various molar ratios of raw materials. It was found that, the molar ratio of 1 : 1 : 4 : 0.5 from 1 : 2 : 3 : CuCl₂·2H₂O obtained the best results under microwave irradiation conditions. As the reaction proceeded after 5 min colorful solid gradually appeared at medium power level option of microwave oven. After completion of the reaction, the crude product was washed with water and filtered off and the solid residue purified further by washing with EtOH to give pure MPPz of 5a in 80% yield. It is important to note that in the absence of CuCl₂·2H₂O or urea the yield of reaction intensively decreased. In addition, excess amounts of them did not increase the yield of the reaction considerably.

To explore the scope and limitations of the reaction, the optimized protocol was applied to other substrates. The procedure was extended to various raw materials and different metal salts such as CoCl₂, FeCl₂·4H₂O, and ZnCl₂. As can be seen from Table 1, the different starting materials are converted to MPPzs in good yields after 5–10 min. In general, these results showed that the CuCl₂·2H₂O among metal salts and 1,2-bis(4-methoxyphenyl) ethane-1,2-dione within dicarbonyl compounds produce the best yields.

PPzs of metal salt are prepared efficiently from 1,2-bis(4-methoxyphenyl) ethane-1,2-dione. However, synthesis of these compounds from biacetyl was not so successful and yields of the reaction were lower than the other derivatives. As a result, the reaction gave excellent results in the cases of using aromatic 1,2-dione, independently of the metal salts.

In comparison with the previously reported multistep procedures [17, 18, 26, 42], this work has some advantages such as higher yields, atom economy, and mild reaction conditions. Furthermore, our protocol does not require any protection/deprotection of functional groups (Scheme 2) [42].

In summary, we have described an efficient microwave-assisted procedure for the synthesis of porphyrazine derivatives carrying six membered pyrazine rings annulated at the periphery of the tetrapyrrolic macrocycle starting from simple and readily available precursors including 2,3-diaminomaleonitrile, 1,2-dicarbonyl compounds, metal salts, and urea. This new multicomponent protocol for the preparation of synthetically, biologically, and technologically relevant MPPzs includes some important aspects like the fast and simple reaction, easy workup procedure, and high atom economy.

3. Experimental

3.1. Materials and Equipment

All solvents, chemicals, and reagents were purchased from Merck, Fluka, and Sigma-Aldrich international chemical companies. Melting points were measured on an Electrothermal 9200 apparatus and are uncorrected. IR and UV-Vis spectra were recorded with a Shimadzu IR-470 spectrometer and UV-Vis Shimadzu 2100, respectively. The elemental analyses were performed with an Elementar Analysensysteme GmbH VarioEL. The microwave oven was a Samsung model GE-4020W (max. 900 W) with five power level options (option used for this experiment: medium 50% power).

3.2. General Procedure for the Preparation of MPPzs (5a–h)

2,3-Diaminomaleonitrile (1 mmol), 1,2-dicarbonyl compound (1 mmol), metal salt (0.5 mmol), and urea (4 mmol) were taken in a round bottomed flask. Then, the resulting mixture was irradiated in a domestic microwave oven at medium state for appropriate time. As the reaction proceeded, colorful solid gradually appeared. After completion of the reaction, the crude product was washed with water (4 × 10 mL) to give dark-green solid. Then, the precipitated solid was dried under vacuum and the solid residue was purified by washing three times in boiling EtOH (3 × 5 mL) until the filtrate was colorless. The solid was dissolved in DMF and filtered through a cartridge filter to remove any inorganic impurities that may have been present. Concentration of the filtrate afforded 5a–h as dark green to blue solids.

The prepared compounds were known and the data are comparable to the literature reports [17, 18, 26, 42].

3.3. Characterization of the Products

5a: Dark blue solid; mp > 200°C. IR (KBr): υ, cm⁻¹ 1604 (m), 1500 (w), 1457 (m), 1415 (m), 1328 (w), 1282 (m), 1166 (s), 1085 (m), 1067 (m), 897 (m), 871 (m), 799 (s), 775 (m), 752 (w). UV-Vis (DMSO): , nm 638, 556, 445. Anal. Calcd for C₃₂H₂₄CuN₁₆: C, 55.21; H, 3.47; N, 32.19. Found C, 55.34; H, 3.56; N, 32.10.

5b: Dark blue solid; mp > 200°C. IR (KBr): υ, cm⁻¹ 1602 (m), 1500 (w), 1457 (m), 1415 (s), 1328 (w), 1282 (m), 1166 (s), 1085 (m), 1067 (m), 897 (m), 871 (m), 799 (s), 775 (w), 752 (w). UV-Vis (DMSO): , nm 655, 564, 457. Anal. Calcd for C₈₀H₅₆CuN₁₆O₈: C, 67.05; H, 3.94; N, 15.64. Found C, 67.12; H, 4.08; N, 15.53.

5c: Dark greenish blue solid; mp > 200°C. IR (KBr): υ, cm⁻¹ 1604 (m), 1515 (w), 1485 (m), 1420 (s), 1326 (s), 1284 (m), 1153 (w), 1085 (s), 1024 (m), 948 (m), 910 (w), 871 (m), 778 (s), 756 (m). UV-Vis (DMSO): , nm 615, 597, 420. Anal. Calcd for C₃₂H₂₄CoN₁₆: C, 55.58; H, 3.50; N, 32.41. Found C, 55.63; H, 3.46; N, 32.58.

5d: Dark green solid; mp > 200°C. IR (KBr): υ, cm⁻¹ 1604 (m), 1516 (w), 1484 (m), 1420 (s), 1326 (m), 1284 (s), 1153 (m), 1115 (s), 1085 (w), 1024 (m), 948 (w), 912 (m), 871 (w), 778 (s), 756 (m). UV-Vis (DMSO): , nm 625, 617, 426. Anal. Calcd for C₈₀H₅₆CoN₁₆O₈: C, 67.27; H, 3.95; N, 15.69. Found C, 67.36; H, 4.13; N, 15.52.

5e: Light olive gray solid; mp > 200°C. IR (KBr): υ, cm⁻¹ 1601 (m), 1478 (w), 1448 (m), 1404 (s), 1327 (m), 1278 (s), 1152 (m), 1112 (w), 1087 (w), 884 (m), 775 (s), 748 (m). UV-Vis (DMSO): , nm 654, 645, 569. Anal. Calcd for C₃₂H₂₄FeN₁₆: C, 55.82; H, 3.51; N, 32.55. Found C, 55.93; H, 3.42; N, 32.67.

5f: Light olive gray solid; mp > 200°C. IR (KBr): υ, cm⁻¹ 1601 (m), 1478 (w), 1448 (m), 1404 (s), 1327 (s), 1278 (m), 1150 (w), 1088 (m), 884 (w), 775 (s), 749 (m). UV-Vis (DMSO): , nm 668, 662, 575. Anal. Calcd for C₈₀H₅₆FeN₁₆O₈: C, 67.42; H, 3.96; N, 15.72. Found C, 67.56; H, 4.15; N, 15.67.

5g: Light greenish blue solid; mp > 200°C. IR (KBr): υ, cm⁻¹ 1600 (m), 1462 (s), 1416 (s), 1325 (m), 1282 (w), 1158 (m), 1112 (m), 1065 (w), 948 (m), 864 (w), 775 (s), 752 (m). UV-Vis (DMSO): , nm 642, 563, 414. Anal. Calcd for C₃₂H₂₄N₁₆Zn: C, 55.06; H, 3.47; N, 32.10. Found C, 54.98; H, 3.52; N, 32.27.

5h: Dark greenish blue solid; mp > 200°C. IR (KBr): υ, cm⁻¹ 1600 (m), 1462 (s), 1415 (m), 1325 (s), 1282 (m), 1158 (w), 1112 (m), 1065 (m), 948 (w), 864 (m), 775 (s), 752 (w). UV-Vis (DMSO): , nm 658, 602, 498, 388. Anal. Calcd for C₈₀H₅₆N₁₆O₈Zn: C, 66.97; H, 3.93; N, 15.62. Found C, 67.06; H, 4.10; N, 15.53.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

Acknowledgment

The authors would like to thank partial support from the Research Council of the Iran University of Science and Technology.

References

“Phthalocyanines: properties and materials,” in The Porphyrin Handbook, K. M. Kadish, K. M. Smith, and R. Guilard, Eds., vol. 17, Academic Press, San Diego, Calif, USA, 2003.
View at: Google Scholar
H. J. Berthold, J. Thiem, A. Zaliani, and T. Schotten, “Spiro-annelated Zn-phthalocyanine: a novel building block for molecular architecture?” Synthesis, vol. 20, pp. 3569–3575, 2010.
View at: Google Scholar
D. Wöhrle, G. Schnurpfeil, S. G. Makarov, A. Kazarin, and O. N. Suvorova, “Practical applications of phthalocyanines—from dyes and pigments to materials for optical, electronic and photo-electronic devices,” Macroheterocycles, vol. 5, pp. 191–202, 2012.
View at: Publisher Site | Google Scholar
R. M. Banavali and K. S. Ho, “Pyrazinoporphyrazines as markers for liquid hydrocarbons,” US Patent 7157611, 2007.
View at: Google Scholar
K. S. Suslick, N. A. Rakow, M. E. Kosal, and J.-H. Chou, “The materials chemistry of porphyrins and metalloporphyrins,” Journal of Porphyrins and Phthalocyanines, vol. 4, pp. 407–413, 2000.
View at: Google Scholar
Y. J. Li, Y. Fan, X. G. Ren et al., “Synthesis of a substituted phthalocyaninato-polysiloxane and its Langmuir-Blodgett films,” Journal of Porphyrins and Phthalocyanines, vol. 2, no. 6, pp. 527–530, 1998.
View at: Google Scholar
C. C. Leznoff and A. B. P. Lever, Phthalocyanines: Properties and Applications, vol. 3, VCH, New York, NY, USA, 1993.
C. M. Drain, J. T. Hupp, K. S. Suslick, M. R. Wasielewski, and X. Chen, “A perspective on four new porphyrin-based functional materials and devices,” Journal of Porphyrins and Phthalocyanines, vol. 6, no. 4, pp. 243–258, 2002.
View at: Google Scholar
T. Sauer, W. Caseri, G. Wegner, A. Vogel, and B. Hoffmann, “Development of novel chemical sensor devices based on LB films from phthalocyaninato-polysiloxane polymers,” Journal of Physics D, vol. 23, no. 1, pp. 79–84, 1990.
View at: Publisher Site | Google Scholar
S. Venugopal Rao and D. Narayana Rao, “Excited state dynamics in phthalocyanines studied using degenerate four wave mixing with incoherent light,” Journal of Porphyrins and Phthalocyanines, vol. 6, no. 3, pp. 233–237, 2002.
View at: Google Scholar
S. V. Rao, N. K. M. Naga Srinivas, D. N. Rao et al., “Excited state dynamics in tetra tolyl porphyrins studied using degenerate four wave mixing with incoherent light and ps pulses,” Optics Communications, vol. 192, no. 1-2, pp. 123–133, 2001.
View at: Publisher Site | Google Scholar
S. V. Rao, N. K. M. N. Srinivas, D. N. Rao et al., “Studies of third-order optical nonlinearity and nonlinear absorption in tetra tolyl porphyrins using degenerate four wave mixing and Z-scan,” Optics Communications, vol. 182, no. 1–3, pp. 255–264, 2000.
View at: Google Scholar
R. Bonnett, “Photosensitizers of the porphyrin and phthalocyanine series for photodynamic therapy,” Chemical Society Reviews, vol. 24, pp. 19–33, 1995.
View at: Publisher Site | Google Scholar
M. K. Nazeeruddin, R. Humphry-Baker, D. L. Officer, W. M. Campbell, A. K. Burrell, and M. Grätzel, “Application of metalloporphyrins in nanocrystalline dye-sensitized solar cells for conversion of sunlight into electricity,” Langmuir, vol. 20, no. 15, pp. 6514–6517, 2004.
View at: Publisher Site | Google Scholar
W. M. Campbell, A. K. Burrell, D. L. Officer, and K. W. Jolley, “Porphyrins as light harvesters in the dye-sensitised TiO₂ solar cell,” Coordination Chemistry Reviews, vol. 248, no. 13-14, pp. 1363–1379, 2004.
View at: Publisher Site | Google Scholar
M. K. Nazeeruddin, R. Humphry-Baker, M. Grätzel, and B. A. Murrer, “efficient near IR sensitization of nanocrystalline TIO₂ films by ruthenium phthalocyanines,” Chemical Communications, vol. 6, pp. 719–720, 1998.
View at: Google Scholar
P. A. Stuzhin and C. Ercolani, “Porphyrazines with annulated heterocycles,” in The Porphyrin Handbook, K. M. Kadish, K. M. Smith, and R. Guilard, Eds., vol. 15, p. 263, Academic Press, New York, NY, USA, 2003.
View at: Google Scholar
S. V. Kudrevich and J. E. van Lier, “Azaanalogs of phthalocyanine: syntheses and properties,” Coordination Chemistry Reviews, vol. 156, pp. 163–182, 1996.
View at: Publisher Site | Google Scholar
K. Kopecky, D. Šatinský, V. Novakova, M. Miletin, A. Svoboda, and P. Zimcik, “Synthesis of mono-, di-, tri- and tetracarboxy azaphthalocyanines as potential dark quenchers,” Dyes and Pigments, vol. 91, no. 2, pp. 112–119, 2011.
View at: Publisher Site | Google Scholar
S. Tomachynskyi, S. Korobko, L. Tomachynski, and V. Pavlenko, “Synthesis and spectral properties of new tetrakis-2,3-{5,7-bis[(E)-2-(4-methylphenyl)vinyl]pyrazino}porphyrazine metal complexes,” Optical Materials, vol. 33, no. 10, pp. 1553–1556, 2011.
View at: Publisher Site | Google Scholar
M. J. Fuchter, C. Zhong, H. Zong, B. M. Hoffman, and A. G. M. Barrett, “Porphyrazines: designer macrocycles by peripheral substituent change,” Australian Journal of Chemistry, vol. 61, no. 4, pp. 235–255, 2008.
View at: Publisher Site | Google Scholar
E. R. Trivedi, B. J. Vesper, H. Weitman et al., “Chiral bis-acetal porphyrazines as near-infrared optical agents for detection and treatment of cancer,” Photochemistry and Photobiology, vol. 86, no. 2, pp. 410–417, 2010.
View at: Publisher Site | Google Scholar
S. L. J. Michel, S. Baum, A. G. M. Barrett, and B. M. Hoffman, “Peripherally functionalized porphyrazines: novel metallomacrocycles with broad, untapped potential,” Progress in Inorganic Chemistry, vol. 50, pp. 473–590, 2001.
View at: Google Scholar
J. C. Maziere, R. Santus, P. Morliere et al., “Cellular uptake and photosensitizing properties of anticancer porphyrins in cell membranes and low and high density lipoproteins,” Journal of Photochemistry and Photobiology B, vol. 6, no. 1-2, pp. 61–68, 1990.
View at: Google Scholar
J. Osterloh and M. G. H. Vicente, “Mechanisms of porphyrinoid localization in tumors,” Journal of Porphyrins and Phthalocyanines, vol. 6, no. 5, pp. 305–324, 2002.
View at: Google Scholar
M. P. Donzello, C. Ercolani, and P. A. Stuzhin, “Novel families of phthalocyanine-like macrocycles-porphyrazines with annulated strongly electron-withdrawing 1,2,5-thia/selenodiazole rings,” Coordination Chemistry Reviews, vol. 250, no. 11-12, pp. 1530–1561, 2006.
View at: Publisher Site | Google Scholar
C. J. Schramm and B. M. Hoffman, “Octakis(alkylthio) tetraazaporphyrins,” Inorganic Chemistry, vol. 19, pp. 383–385, 1980.
View at: Publisher Site | Google Scholar
C. S. Velazquez, W. E. Broderick, M. Sabat, A. G. M. Barrett, and B. M. Hoffman, “Metal-encapsulated porphyrazines: synthesis, x-ray crystal structure and spectroscopy of a tetratin-star-nickel(porphyrazine)S8 complex,” Journal of the American Chemical Society, vol. 112, pp. 7408–7410, 1990.
View at: Publisher Site | Google Scholar
E. G. Sakellariou, A. G. Montalban, H. G. Meunier et al., “Synthesis and photophysical properties of peripherally metallated bis(dimethylamino)porphyrazines,” Journal of Photochemistry and Photobiology A, vol. 136, no. 3, pp. 185–187, 2000.
View at: Google Scholar
J. Fitzgerald, W. Taylor, and H. Owen, “Facile synthesis of substituted fumaronitriles and maleonitriles: precursors to soluble tetraazaporphyrins,” Synthesis, no. 9, pp. 686–688, 1991.
View at: Google Scholar
J. P. Fitzgerald, B. S. Haggerty, A. L. Rheingold, L. May, and G. A. Brewer, “Iron octaethyltetraazaporphyrins: synthesis, characterization, coordination chemistry, and comparisons to related iron porphyrins and phthalocyanines,” Inorganic Chemistry, vol. 31, no. 11, pp. 2006–2013, 1992.
View at: Google Scholar
M. E. Anderson, S. Baum, A. G. M. Barrett, and B. M. Hoffman, “Super-charged porphyrazines: synthesis and physical properties of octacationic tetraazaporphyrins,” Inorganic Chemistry, vol. 38, pp. 6143–6151, 1999.
View at: Publisher Site | Google Scholar
M. Polat and A. Gül, “Synthesis of new porphyrazines with tertiary or quaternized aminoethyl substituents,” Dyes and Pigments, vol. 45, no. 3, pp. 195–199, 2000.
View at: Google Scholar
R. Z. U. Kobak, E. S. Öztürk, A. Koca, and A. Gül, “The synthesis and cyclotetramerisation reactions of aryloxy-,arylalkyloxy-substituted pyrazine-2,3-dicarbonitriles and spectroelectrochemical properties of octakis(hexyloxy)-pyrazinoporphyrazine,” Dyes and Pigments, vol. 86, pp. 115–122, 2010.
View at: Publisher Site | Google Scholar
Q. Gan, F. Xiong, S. Li et al., “Synthesis and photophysical properties of a series of octaphenyl-porphyrazine-magnesium,” Inorganic Chemistry Communications, vol. 8, pp. 285–288, 2005.
View at: Publisher Site | Google Scholar
A. Loupy, Microwave in Organic Synthesis, Wiley-VCH, Weinheim, Gemany, 2002.
A. Maleki, “Fe₃O₄/SiO₂ nanoparticles: an efficient and magnetically recoverable nanocatalyst for the one-pot multicomponent synthesis of diazepines,” Tetrahedron, vol. 68, pp. 7827–7833, 2012.
View at: Publisher Site | Google Scholar
A. Maleki, “One-pot multicomponent synthesis of diazepine derivatives using terminal alkynes in the presence of silica-supported superparamagnetic iron oxide nanoparticles,” Tetrahedron Letters, vol. 54, pp. 2055–2059, 2013.
View at: Publisher Site | Google Scholar
A. Shaabani, A. Maleki, and J. Moghimi-Rad, “A novel isocyanide-based three-component reaction: synthesis of highly substituted 1,6-dihydropyrazine-2,3-dicarbonitrile derivatives,” Journal of Organic Chemistry, vol. 72, pp. 6309–6311, 2007.
View at: Publisher Site | Google Scholar
A. Shaabani, A. Maleki, H. Mofakham, and J. Moghimi-Rad, “A novel one-pot pseudo-five-component synthesis of 4,5,6,7-tetrahydro-1H-1, 4-diazepine-5-carboxamide derivatives,” Journal of Organic Chemistry, vol. 73, no. 10, pp. 3925–3927, 2008.
View at: Publisher Site | Google Scholar
A. Shaabani and J. Maleki, “Rapid and efficient synthesis of metal-free phthalocyanine derivatives,” Porphyrins Phthalocyanines, vol. 10, p. 1253, 2006.
View at: Publisher Site | Google Scholar
E. M. Bauer, C. Ercolani, P. Galli, I. A. Popkova, and P. A. Stuzhin, “Tetrakis(selenodiazole)porphyrazines—1: tetrakis(selenodiazole)porphyrazine and its Mg(II) and Cu(II) Derivatives. Evidence for their Conversion to Tetrakis(pyrazino)porphyrazines through Octaaminoporphyrazines,” Journal of Porphyrins and Phthalocyanines, vol. 3, no. 5, pp. 371–379, 1999.
View at: Google Scholar

Copyright

Copyright © 2014 Ali Maleki and Ali Hossein Rezayan. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

1796

Downloads

717

Citations