Table of Contents
Magnetic and Electrical Separation
Volume 8 (1997), Issue 3, Pages 185-194
http://dx.doi.org/10.1155/1997/73718

The Use of Physical Methods in Treating Raw Materials of the Banská Štiavnica Region

Department of Mineral Processing and Environmental Protection, BERG Faculty, Technical University of Košice, Košice 042 00, Slovakia

Received 18 July 1996; Accepted 15 October 1996

Copyright © 1997 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Laboratory experiments on beneficiation of feldspar using physical methods are described. The results of the tests in which table, magnetic and electrical separations were used show that it is not possible to reduce the concentration of iron in the final product below 1%. It is thus clear that physico—chemical techniques must be applied.