Physical Separation in Science and Engineering

Physical Separation in Science and Engineering / 2004 / Article

Open Access

Volume 13 |Article ID 465438 | https://doi.org/10.1080/14786470412331286580

K. Udaya Bhaskar, B. Govindarajan, J. P. Barnwal, K. K. Rao, T. C. Rao, "Modelling Studies on a 100 mm Water-Injection Cyclone", Physical Separation in Science and Engineering, vol. 13, Article ID 465438, 11 pages, 2004. https://doi.org/10.1080/14786470412331286580

Modelling Studies on a 100 mm Water-Injection Cyclone

Received18 May 2004
Revised06 Jul 2004

Abstract

Test work on a 100 mm water-injection cyclone was carried out using a ground lead-zinc ore. Experiments were conducted varying the vortex finder diameter, spigot diameter, feed inlet pressure and injection water rate. The effect of variables on the performance of the water-injection cyclone in terms of slurry throughput and corrected cut-size are presented. A set of equations have been developed for predicting the performance of a water-injection cyclone. Further, the reduced efficiency curve was quantified to predict the size distribution of water-injection cyclone products.

Copyright © 2004 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


More related articles

 PDF Download Citation Citation
 Order printed copiesOrder
Views35
Downloads0
Citations

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.