Corrigendum to “Microscopic Examination of Cold Spray Cermet Sn+In<sub>2</sub>O<sub>3</sub> Coatings for Sputtering Target Materials”

Winnicki, M.; Baszczuk, A.; Rutkowska-Gorczyca, M.; Jasiorski, M.; Małachowska, A.; Posadowski, W.; Znamirowski, Z.; Ambroziak, A.

doi:https://doi.org/10.1155/2017/3107374

Scanning

On this page

References Copyright Related Articles

Research Article Corrigendum

Corrigendum | Open Access

Volume 2017 | Article ID 3107374 | https://doi.org/10.1155/2017/3107374

Corrigendum to “Microscopic Examination of Cold Spray Cermet Sn+In₂O₃ Coatings for Sputtering Target Materials”

M. Winnicki,¹A. Baszczuk,¹M. Rutkowska-Gorczyca,¹M. Jasiorski,¹A. Małachowska,¹W. Posadowski,¹Z. Znamirowski,¹and A. Ambroziak¹

Received14 Sept 2017

Accepted16 Oct 2017

Published25 Oct 2017

In the article titled “Microscopic Examination of Cold Spray Cermet Sn+In₂O₃ Coatings for Sputtering Target Materials” [1], an acknowledgment should be added as follows.

This paper is based on the research supported by the Foundation for Polish Science (FNP).

References

M. Winnicki, A. Baszczuk, M. Rutkowska-Gorczyca et al., “Microscopic examination of cold spray cermet Sn+In₂O₃ coatings for sputtering target materials,” Scanning, vol. 2017, Article ID 4058636, 10 pages, 2017.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2017 M. Winnicki et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

471

Downloads

636

Citations

Scanning

Corrigendum to “Microscopic Examination of Cold Spray Cermet Sn+In2O3 Coatings for Sputtering Target Materials”

References

Copyright

Corrigendum to “Microscopic Examination of Cold Spray Cermet Sn+In₂O₃ Coatings for Sputtering Target Materials”