Table of Contents Author Guidelines Submit a Manuscript
Scanning
Volume 2017 (2017), Article ID 6215691, 7 pages
https://doi.org/10.1155/2017/6215691
Research Article

In Situ SEM Torsion Test of Metallic Glass Microwires Based on Micro Robotic Manipulation

1Department of Mechanical and Biomedical Engineering, City University of Hong Kong, Kowloon, Hong Kong
2Center for Advanced Structural Materials (CASM), Shenzhen Research Institute, City University of Hong Kong, Shenzhen 518057, China
3Centre for Robotics and Automation, Shenzhen Research Institute, City University of Hong Kong, Shenzhen 518057, China

Correspondence should be addressed to Yajing Shen; kh.ude.uytic@nehsijay and Yang Lu; kh.ude.uytic@ulgnay

Received 24 March 2017; Accepted 25 July 2017; Published 23 August 2017

Academic Editor: Nicolas Delorme

Copyright © 2017 Chenchen Jiang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Ranjan, M. Mertig, G. Cuniberti, and W. Pompe, “Dielectrophoretic growth of metallic nanowires and microwires: Theory and experiments,” Langmuir, vol. 26, no. 1, pp. 552–559, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Zhukov, C. García, J. J. Del Val et al., “Studies of Fe-Cu microwires with nanogranular structure,” Journal of Physics Condensed Matter, vol. 21, no. 3, Article ID 035301, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Hu, Y. Bando, J. Zhan, X. Yuan, T. Sekiguchi, and D. Golberg, “Self-assembly of SiO2 nanowires and Si microwires into hierarchical heterostructures on a large scale,” Advanced Materials, vol. 17, no. 8, pp. 971–975, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. L. Jiang, Y. Fu, H. Li, and W. Hu, “Single-crystalline, size, and orientation controllable nanowires and ultralong microwires of organic semiconductor with strong photoswitching property,” Journal of the American Chemical Society, vol. 130, no. 12, pp. 3937–3941, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Varga, T. Ryba, Z. Vargova, K. Saksl, V. Zhukova, and A. Zhukov, “Magnetic and structural properties of Ni-Mn-Ga Heusler-type microwires,” Scripta Materialia, vol. 65, no. 8, pp. 703–706, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. X. Lu, Y. Yu, L. Chen et al., “Poly(acrylic acid)-guided synthesis of helical polyaniline microwires,” Polymer, vol. 46, no. 14, pp. 5329–5333, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. S.-P. Tsai, D. W. Howell, Z. Huang et al., “The effect of protein fusions on the production and mechanical properties of protein-based materials,” Advanced Functional Materials, vol. 25, no. 9, pp. 1442–1450, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. E. T. Thostenson, W. Z. Li, D. Z. Wang, Z. F. Ren, and T. W. Chou, “Carbon nanotube/carbon fiber hybrid multiscale composites,” Journal of Applied Physics, vol. 91, no. 9, pp. 6034–6037, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Guitchounts, J. E. Markowitz, W. A. Liberti, and T. J. Gardner, “A carbon-fiber electrode array for long-term neural recording,” Journal of Neural Engineering, vol. 10, no. 4, Article ID 046016, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. Q. Yang, W. Wang, S. Xu, and Z. L. Wang, “Enhancing light emission of ZnO microwire-based diodes by piezo-phototronic effect,” Nano Letters, vol. 11, no. 9, pp. 4012–4017, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. M. C. Putnam, S. W. Boettcher, M. D. Kelzenberg et al., “Si microwire-array solar cells,” Energy and Environmental Science, vol. 3, no. 8, pp. 1037–1041, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Lee and J. Kim, “Fabrication of strongly anchored, high aspect ratio elastomeric microwires for mechanical and optical applications,” Journal of Micromechanics and Microengineering, vol. 21, no. 8, Article ID 085016, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Chai, E. Rusu, L. Chow et al., “Microsensor on single ZnO microwire,” in Proceedings of the 2009 International Semiconductor Conference, CAS 2009, pp. 275–278, October 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. K. S. Nakayama, Y. Yokoyama, G. Xie et al., “Metallic glass nanowire,” Nano Letters, vol. 8, no. 2, pp. 516–519, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Tian, Y.-Q. Cheng, Z.-W. Shan et al., “Approaching the ideal elastic limit of metallic glasses,” Nature Communications, vol. 3, article no. 609, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. X. K. Xi, D. Q. Zhao, M. X. Pan, W. H. Wang, Y. Wu, and J. J. Lewandowski, “Fracture of brittle metallic glasses: Brittleness or plasticity,” Physical Review Letters, vol. 94, no. 12, Article ID 125510, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Zhukov, M. Vázquez, J. Velázquez, A. Hernando, and V. Larin, “Magnetic properties of Fe-based glass-coated microwires,” Journal of Magnetism and Magnetic Materials, vol. 170, no. 3, pp. 323–330, 1997. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Zhukov, K. Chichay, A. Talaat et al., “Manipulation of magnetic properties of glass-coated microwires by annealing,” Journal of Magnetism and Magnetic Materials, vol. 383, pp. 232–236, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Zhukov, M. Ipatov, and V. Zhukova, “Advances in giant magnetoimpedance of materials,” Handbook of Magnetic Materials, vol. 24, pp. 139–236, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. V. Zhukova, M. Ipatov, and A. Zhukov, “Thin magnetically soft wires for magnetic microsensors,” Sensors, vol. 9, no. 11, pp. 9216–9240, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. P. Sharma, N. Kaushik, H. Kimura, Y. Saotome, and A. Inoue, “Nano-fabrication with metallic glass - an exotic material for nano-electromechanical systems,” Nanotechnology, vol. 18, no. 3, Article ID 035302, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Zhao, K. Abe, S.-I. Yamaura, Y. Yamamoto, and N. Asao, “Fabrication of Pd-Ni-P metallic glass nanoparticles and their application as highly durable catalysts in methanol electro-oxidation,” Chemistry of Materials, vol. 26, no. 2, pp. 1056–1061, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. T. A. Phan, M. Hara, H. Oguchi, and H. Kuwano, “Current sensors using Fe-B-Nd-Nb magnetic metallic glass micro-cantilevers,” Microelectronic Engineering, vol. 135, pp. 28–31, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Banerjee, C. Jiang, L. Lohiya, Y. Yang, and Y. Lu, “Fracto-emission in lanthanum-based metallic glass microwires under quasi-static tensile loading,” Journal of Applied Physics, vol. 119, no. 15, Article ID 155102, 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. H. Sun, Z. Ning, G. Wang et al., “Tensile strength reliability analysis of Cu48Zr48Al4 amorphous microwires,” Metals, vol. 6, no. 12, article no. 296, 2016. View at Publisher · View at Google Scholar · View at Scopus
  26. H. Shen, D. Xing, H. Wang et al., “Tensile properties and fracture reliability of melt-extracted Gd-rich amorphous wires,” Materials Research, vol. 18, pp. 66–71, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Lu and J. Lou, “Quantitative in-situ nanomechanical characterization of metallic nanowires,” JOM, vol. 63, no. 9, pp. 35–42, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. P. Kumar and M. S. R. N. Kiran, “Nanomechanical characterization of indium nano/microwires,” Nanoscale Research Letters, vol. 5, no. 7, pp. 1085–1092, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. Z. Liu, X. Yan, Z. Lin, Y. Huang, H. Liu, and Y. Zhang, “Mechanical properties and indentation-induced damage of high-quality ZnO microwires,” Materials Research Bulletin, vol. 47, no. 3, pp. 750–754, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. H. Zhang, K. W. Siu, W. Liao, Q. Wang, Y. Yang, and Y. Lu, “In situ mechanical characterization of CoCrCuFeNi high-entropy alloy micro/nano-pillars for their size-dependent mechanical behavior,” Materials Research Express, vol. 3, no. 9, Article ID 094002, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. S. Maekawa, K. Takashima, M. Shimojo et al., “Fatigue tests of Ni-P amorphous alloy microcantilever beams,” Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, vol. 38, no. 12 B, pp. 7194–7198, 1999. View at Publisher · View at Google Scholar · View at Scopus
  32. M. M. McClarty, J. P. Bruce, M. S. Freund, and D. R. Oliver, “Piezoresistive characterization of bottom-up, n-type silicon microwires undergoing bend deformation,” Applied Physics Letters, vol. 106, no. 2, Article ID 022107, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. S. K. Deb Nath, H. Tohmyoh, and M. A. Salam Akanda, “Evaluation of elastic, elastic-plastic properties of thin Pt wire by mechanical bending test,” Applied Physics A: Materials Science and Processing, vol. 103, no. 2, pp. 493–496, 2011. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Khatibi, A. Betzwar-Kotas, V. Gröger, and B. Weiss, “A study of the mechanical and fatigue properties of metallic microwires,” Fatigue and Fracture of Engineering Materials and Structures, vol. 28, no. 8, pp. 723–733, 2005. View at Publisher · View at Google Scholar · View at Scopus
  35. P. Li, Q. Liao, S. Yang et al., “In situ transmission electron microscopy investigation on fatigue behavior of single ZnO wires under high-cycle strain,” Nano Letters, vol. 14, no. 2, pp. 480–485, 2014. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. J. Dai, Y. Huan, M. Gao et al., “Development of a high-resolution micro-torsion tester for measuring the shear modulus of metallic glass fibers,” Measurement Science and Technology, vol. 26, no. 2, Article ID 025902, 2015. View at Publisher · View at Google Scholar · View at Scopus
  37. D. Liu, Y. He, X. Tang, H. Ding, P. Hu, and P. Cao, “Size effects in the torsion of microscale copper wires: experiment and analysis,” Scripta Materialia, vol. 66, no. 6, pp. 406–409, 2012. View at Publisher · View at Google Scholar · View at Scopus
  38. C. Jiang, D. Hu, and Y. Lu, “Digital micromirror device (DMD)-based high-cycle torsional fatigue testing micromachine for 1D nanomaterials,” Micromachines, vol. 7, no. 3, article 49, 2016. View at Publisher · View at Google Scholar · View at Scopus
  39. V. Zhukova, A. F. Cobeo, A. Zhukov et al., “Correlation between magnetic and mechanical properties of devitrified glass-coated Fe71.8Cu1Nb3.1Si15B9.1 microwires,” Journal of Magnetism and Magnetic Materials, vol. 249, no. 1-2, pp. 79–84, 2002. View at Publisher · View at Google Scholar · View at Scopus
  40. A. Zhukov, M. Ipatov, A. Talaat et al., “Correlation of crystalline structure with magnetic and transport properties of glass-coated microwires,” Crystals, vol. 7, no. 2, p. 41, 2017. View at Publisher · View at Google Scholar
  41. Y. Shen, Z. Zhang, and T. Fukuda, “Bending spring rate investigation of nanopipette for cell injection,” Nanotechnology, vol. 26, no. 15, Article ID 155702, 2015. View at Publisher · View at Google Scholar · View at Scopus
  42. W. Shang, H. Lu, W. Wan, T. Fukuda, and Y. Shen, “Vision-based nano robotic system for high-throughput non-embedded cell cutting,” Scientific Reports, vol. 6, Article ID 22534, 2016. View at Publisher · View at Google Scholar · View at Scopus
  43. W. Wan, H. Lu, V. Zhukova, M. Ipatov, A. Zhukov, and Y. Shen, “Surface defect detection of magnetic microwires by miniature rotatable robot inside SEM,” AIP Advances, vol. 6, no. 9, Article ID 095309, 2016. View at Publisher · View at Google Scholar · View at Scopus
  44. Y. Shen, W. Wan, H. Lu, T. Fukuda, and W. Shang, “Automatic sample alignment under microscopy for 360° imaging based on the nanorobotic manipulation system,” IEEE Transactions on Robotics, vol. 33, no. 1, pp. 220–226, 2017. View at Publisher · View at Google Scholar · View at Scopus
  45. Y. Shen, W. Wan, L. Zhang, L. Yong, H. Lu, and W. Ding, “Multidirectional image sensing for microscopy based on a rotatable robot,” Sensors (Switzerland), vol. 15, no. 12, pp. 31566–31580, 2015. View at Publisher · View at Google Scholar · View at Scopus
  46. D. H. Sharp, “An overview of rayleigh-taylor instability,” Physica D: Nonlinear Phenomena, vol. 12, no. 1-3, pp. 3–IN10, 1984. View at Publisher · View at Google Scholar · View at Scopus
  47. Z. Huang, Y. Lu, R. Majithia et al., “Size dictates mechanical properties for protein fibers self-assembled by the drosophila hox transcription factor ultrabithorax,” Biomacromolecules, vol. 11, no. 12, pp. 3644–3651, 2010. View at Publisher · View at Google Scholar · View at Scopus