Characterization of Microstructures and Tensile Properties of Recycled Al-Si-Cu-Fe-Mn Alloys with Individual and Combined Addition of Titanium and Cerium

<div>Phase identification of the fabricated samples by using SEM/EDS and XRD: (a) the Al-Si-Cu-Fe-Mn alloy, (b) the alloy with Ce, (c) the alloy with Ti, (d) the alloy with Ce and Ti.</div>

Scanning

fig7

Figure 7

Figure 7: Characterization of Microstructures and Tensile Properties of Recycled Al-Si-Cu-Fe-Mn Alloys with Individual and Combined Addition of Titanium and Cerium 

Figure 7 | Characterization of Microstructures and Tensile Properties of Recycled Al-Si-Cu-Fe-Mn Alloys with Individual and Combined Addition of Titanium and Cerium 