Characterization of Microstructures and Tensile Properties of Recycled Al-Si-Cu-Fe-Mn Alloys with Individual and Combined Addition of Titanium and Cerium

<table class="table-group" id="tab3"><tr><td><table class="table"><tr><td class="thead-hr" colspan="8"><hr/></td></tr><tr class="thead"><td class="align_left">Region</td><td class="align_center">Al</td><td class="align_center">Si</td><td class="align_center">Cu</td><td class="align_center">Fe</td><td class="align_center">Mn</td><td class="align_center">Ce</td><td class="align_center">Ti</td></tr><tr><td class="thead-hr" colspan="8"><hr/></td></tr><tr><td class="align_left">(1)</td><td class="align_center">66.94</td><td class="align_center">22.11</td><td class="align_center">1.37</td><td class="align_center">—</td><td class="align_center">—</td><td class="align_center">3.12</td><td class="align_center">6.46</td></tr><tr><td class="align_left">(2)</td><td class="align_center">69.71</td><td class="align_center">13.09</td><td class="align_center">0.02</td><td class="align_center">9.26</td><td class="align_center">7.94</td><td class="align_center">—</td><td class="align_center">—</td></tr><tr><td class="align_left">(3)</td><td class="align_center">58.47</td><td class="align_center">41.53</td><td class="align_center">—</td><td class="align_center">—</td><td class="align_center">—</td><td class="align_center">—</td><td class="align_center">—</td></tr><tr class="table-tr"><td colspan="8"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Compositions of secondary phases in the three marked regions in Figure <a href="../fig7/#d">7(d)</a>.</div>

Scanning

tab3

Table 3

Table 3: Characterization of Microstructures and Tensile Properties of Recycled Al-Si-Cu-Fe-Mn Alloys with Individual and Combined Addition of Titanium and Cerium 

Table 3 | Characterization of Microstructures and Tensile Properties of Recycled Al-Si-Cu-Fe-Mn Alloys with Individual and Combined Addition of Titanium and Cerium 