Two-Phase Flow Simulations for PTS Investigation by Means of Neptune_CFD Code

Table 1

Geometry and flow conditions.

(a) Geometry of test section

Circular injector, vertical downward flow
Vessel diameter	D = 200 mm
Vessel height	H = 390 mm
Injector diameter	d = 5 mm
Height of the injector above free surface	h = 2 mm

(b) Flow conditions

Turbulent nonfragmented jet entering a free surface
Fluids	Air-water
Heating	no
Pressure	1 bar
Jet velocity	2.54 m/s
Jet turbulence intensity	5–15%