Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2012 (2012), Article ID 726489, 12 pages
http://dx.doi.org/10.1155/2012/726489
Research Article

Thermostructural Analysis of Plate-Type Heat Exchanger Prototypes Considering Weld Properties

VHTR Technology Development Group, Korea Atomic Energy Research Institute, 1045 Daedeok-daero, Yusong-gu, Daejeon 305353, Republic of Korea

Received 9 August 2012; Revised 16 November 2012; Accepted 16 November 2012

Academic Editor: Leon Cizelj

Copyright © 2012 Kee-nam Song and Sung-deok Hong. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. W. Kim et al., Development of essential technology, KAERI/RR-2992/2008, Korea Atomic Energy Research Institute, 2009.
  2. E. George Linnert, Welding Metallurgy 1, American Welding Society, New York, NY, USA, 1965.
  3. K. N. Song, H. Y. Lee, C. S. Kim, S. D. Hong, and H. Y. Park, “High-temperature structural analysis model of the process heat exchanger for helium gas loop (II),” Transactions of the Korean Society of Mechanical Engineers A, vol. 34, no. 10, pp. 1455–1462, 2010 (Korean). View at Publisher · View at Google Scholar · View at Scopus
  4. K. N. Song, H. Y. Lee, S. D. Hong, and H. Y. Park, “High-Temperature structural analysis on the small-scale PHE prototype,” Transactions of the Korean Society of Pressure Vessels and Piping, vol. 6, pp. 57–64, 2011 (Korean). View at Google Scholar
  5. K. N. Song, H. Y. Lee, C. S. Kim, S. D. Hong, and H. Y. Park, “High-temperature structural analysis of small-scale prototype of process heat exchanger (III),” Transactions of the Korean Society of Mechanical Engineers A, vol. 35, no. 2, pp. 191–200, 2011 (Korean). View at Publisher · View at Google Scholar · View at Scopus
  6. K. N. Song, S. D. Hong, and H. Y. Park, “High-Temperature structural analysis of a small-scale prototype of a process heat exchanger (IV),” Transactions of the Korean Society of Mechanical Engineers A, vol. 35, pp. 1249–1255, 2011 (Korean). View at Google Scholar
  7. K. N. Song, S. D. Hong, and H. Y. Park, “High-Temperature structural analysis on the small-scale prototype under the test condition of small-scale gas loop,” Transactions of the Korean Society of Pressure Vessels and Piping, vol. 8, pp. 1–7, 2012. View at Google Scholar
  8. I. S. O. TR29381, “Metallic materials—instrumented indentation test for measurement of indentation tensile properties,” 2008.
  9. K. N. Song and D. S. Ro, “Measurement of mechanical properties in weld zone of nuclear material using an instrumented indentation technique,” Journal of the Korean Welding & Joining Society, vol. 30, no. 3, pp. 249–254, 2012 (Korean). View at Google Scholar
  10. K. N. Song, S. D. Hong, S. H. Lee, and H. Y. Park, “Effect of mechanical properties in the weld zone on the structural analysis results of a plate-type heat exchanger prototype and pressurized water reactor spacer grid,” Journal of Nuclear Science and Technology, vol. 49, pp. 947–960, 2012. View at Google Scholar
  11. X. Hastelloy- alloy, 2012, http://www.haynesintl.com/pdf/h3009.pdf.
  12. K. N. Song, S. D. Hong, and H. Y. Park, “High-temperature structural analysis on a medium-scale PHE prototype,” Transactions of the Korean Society of Mechanical Engineers A, vol. 36, pp. 1283–1288, 2012 (Korean). View at Google Scholar
  13. K. N. Song, S. D. Hong, and H. Y. Park, “High-temperature structural analysis of a small-scale PHE prototype under the test condition of a small-scale gas loop,” Science and Technology of Nuclear Installation, vol. 2012, Article ID 312080, 10 pages, 2012. View at Publisher · View at Google Scholar
  14. Siemens PLM software I-DEAS/TMG User Manual Version 6. 1, 2009.
  15. Dassault Systemes Simulia ABAQUS Analysis User Manual Version 6. 9-1, 2009.