Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2016, Article ID 1245387, 10 pages
http://dx.doi.org/10.1155/2016/1245387
Research Article

Reliability Evaluation of NPP’s Power Supply System Based on Improved GO-FLOW Method

1School of Electrical Engineering, Wuhan University, Wuhan 430072, China
2State Grid Fujian Electric Power Co. Ltd., Economic and Technology Institute, Fuzhou 350012, China

Received 21 June 2016; Revised 16 August 2016; Accepted 17 August 2016

Academic Editor: Eugenijus Ušpuras

Copyright © 2016 Jie Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Zhang and K. W. Chan, “Reliability evaluation of phasor measurement unit using Monte Carlo dynamic fault tree method,” IEEE Transactions on Smart Grid, vol. 3, no. 3, pp. 1235–1243, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. Z. Sun and L. Li, “Potential capability estimation for real time electricity demand response of sustainable manufacturing systems using Markov Decision Process,” Journal of Cleaner Production, vol. 65, no. 4, pp. 184–193, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. V. Pagonis, E. Gochnour, M. Hennessey, and C. Knower, “Monte Carlo simulations of luminescence processes under quasi-equilibrium (QE) conditions,” Radiation Measurements, vol. 67, no. 4, pp. 67–76, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. F. Zhao, L. Liang, and S. Wang, “A reliability evaluation of high speed railway overhead contact systems based on the GO-FLOW methodology,” Transactions of China Electrotechnical Society, vol. 30, no. 12, pp. 351–356, 2015. View at Google Scholar · View at Scopus
  5. B. Gjorgiev, A. Volkanovski, D. Kančev, and M. Čepin, “Alternative off-site power supply improves nuclear power plant safety,” Annals of Nuclear Energy, vol. 71, pp. 304–312, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. US Nuclear Regulatory Commission, NUREG/CR-6890 Vol 2—Reevaluation of Station Blackout Risk at Nuclear Power Plants: Analysis of Station Blackout Risk, US Nuclear Regulatory Commission, Washington, DC, USA, 2005.
  7. K. D. Rao, V. Gopika, V. V. S. Sanyasi Rao, H. S. Kushwaha, A. K. Verma, and A. Srividya, “Dynamic fault tree analysis using Monte Carlo simulation in probabilistic safety assessment,” Reliability Engineering & System Safety, vol. 94, no. 4, pp. 872–883, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Muhammad, Y. Hidekazu, M. Takeshi, and Y. Ming, “Common cause failure analysis of PWR containment spray system by GO-FLOW methodology,” Nuclear Engineering and Design, vol. 262, pp. 350–357, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Hashim, H. Yoshikawa, T. Matsuoka, and M. Yang, “Considerations of uncertainties in evaluating dynamic reliability by GO-FLOW methodology-example study of reliability monitor for PWR safety system in the risk-monitor system,” Journal of Nuclear Science and Technology, vol. 50, no. 7, pp. 695–708, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Hashim, Y. Hidekazu, M. Takeshi, and Y. Ming, “Application case study of AP1000 automatic depressurization system (ADS) for reliability evaluation by GO-FLOW methodology,” Nuclear Engineering and Design, vol. 278, pp. 209–221, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. S. H. Lee, H. E. Kim, K. S. Son, S. M. Shin, S. J. Lee, and H. G. Kang, “Reliability modeling of safety-critical network communication in a digitalized nuclear power plant,” Reliability Engineering and System Safety, vol. 144, pp. 285–295, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Liu and Y. Yu, “A T-H model for residual heat removal system reliability analysis,” Energy Procedia, vol. 39, pp. 283–293, 2013. View at Publisher · View at Google Scholar
  13. Y. Zou, L. Zhang, and P. Li, “Reliability forecasting for operators' situation assessment in digital nuclear power plant main control room based on dynamic network model,” Safety Science, vol. 80, pp. 163–169, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Hashim, H. Yoshikawa, T. Matsuoka, and M. Yang, “Quantitative dynamic reliability evaluation of AP1000 passive safety systems by using FMEA and GO-FLOW methodology,” Journal of Nuclear Science and Technology, vol. 51, no. 4, pp. 526–542, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Hashim, H. Yoshikawa, T. Matsuoka, and M. Yang, “Reliability monitor for PWR safety system using FMEA and go-flow methodology: application of risk monitor for nuclear power plants,” in Proceedings of the 2013 21st International Conference on Nuclear Engineering (ICONE '13), Chengdu, China, August 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. E. Zio, “Integrated deterministic and probabilistic safety assessment: concepts, challenges, research directions,” Nuclear Engineering and Design, vol. 280, pp. 413–419, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Bai, X. Li, R. Tan, and B. Lian, “A function failure analysis method for improving reliability of the product based on GO-FLOW methodology,” in Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM '08), pp. 550–555, Singapore, December 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. A. C. G. Melo and M. V. F. Pereira, “Sensitivity analysis of reliability indices with respect to equipment failure and repair rates,” IEEE Transactions on Power Systems, vol. 10, no. 2, pp. 1014–1021, 1995. View at Publisher · View at Google Scholar · View at Scopus
  19. T. Okazaki, N. Mitomo, and T. Matsuoka, “The use of the GO-FLOW methodology to investigate the aging effects in nuclear power plants (PSAM-0113),” in Proceedings of the 8th International Conference on Probabilistic Safety Assessment & Management (PSAM '06), ASME Press, 2006.
  20. Z. Shen and X. Huang, The Principle and Application of the GO Method, Tsinghua University Press, Beijing, China, 2004.
  21. Northwest Power Design Institute, Electric Wiring And Distribution of Power Plants And Substations, Water Conservancy and Electric Power Press, Shanxi, China, 1982.