Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 5 (1998), Issue 4, Pages 211-224

Measuring the Acceleration of a Rigid Body

Peter G. Martin,1 Gregory W. Hall,2 Jeff R. Crandall,1 and Walter D. Pilkey1

1Department of Mechanical, Aerospace, and Nuclear Engineering, Automobile Safety Laboratory, University of Virginia, 1011 Linden Avenue, Charlottesville, VA 22902, USA
2Exponent Failure Analysis Associates, 149 Commonwealth Drive, Menlo Park, CA 94025, USA

Received 26 September 1997; Revised 10 July 1998

Copyright © 1998 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Peter G. Martin, Gregory W. Hall, Jeff R. Crandall, and Walter D. Pilkey, “Measuring the Acceleration of a Rigid Body,” Shock and Vibration, vol. 5, no. 4, pp. 211-224, 1998. doi:10.1155/1998/134562