International Conference on Structural Engineering Dynamics – ICEDyn 2009
View this Special IssueOpen Access
David Cirkl, "Modelling of Damping Force of Dynamically Loaded Specimen of Polyurethane Foam in Dependence on Its Density", Shock and Vibration, vol. 17, Article ID 937837, 9 pages, 2010. https://doi.org/10.3233/SAV-2010-0533
Modelling of Damping Force of Dynamically Loaded Specimen of Polyurethane Foam in Dependence on Its Density
Abstract
Article deals with measurement and modelling of damping force of polyurethane foam specimen being compressed. The specimens were taken from car seats and differ by material density. For modelling of damping force during harmonical kinematical excitation the explicit formula is used. Its parameters are found by means of method based on evaluation of energy dissipated during one loading cycle and also on evaluation of position of damping force extreme.
Copyright
Copyright © 2010 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.