Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014, Article ID 276796, 8 pages
http://dx.doi.org/10.1155/2014/276796
Research Article

Monitoring of Rotor-Stator Interaction in Pump-Turbine Using Vibrations Measured with On-Board Sensors Rotating with Shaft

1Department of Mechanical Engineering, University of Concepcion, Edmundo Larenas 270 Interior, 4070409 Concepcion, Chile
2Centre of Industrial Diagnostics and Fluid Dynamics (CDIF), Technical University of Catalonia (UPC), Av. Diagonal 647, 08028 Barcelona, Spain

Received 10 April 2013; Accepted 24 May 2013; Published 12 February 2014

Academic Editor: Valder Steffen

Copyright © 2014 Cristian G. Rodriguez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Arndt, A. J. Acosta, C. E. Brennen, and T. K. Caughey, “Rotor-stator interaction in a diffuser pump,” Journal of Turbomachinery, vol. 111, no. 3, pp. 213–221, 1989. View at Publisher · View at Google Scholar · View at Scopus
  2. N. Arndt, A. J. Acosta, C. E. Brennen, and T. K. Caughey, “Experimental investigation of rotor-stator interaction in a centrifugal pump with several vaned diffusers,” Journal of Turbomachinery, vol. 112, no. 1, pp. 98–108, 1990. View at Publisher · View at Google Scholar · View at Scopus
  3. R. S. Miskovish and C. E. Brennen, “Some unsteady fluid forces on pump impellers,” Journal of Fluids Engineering, vol. 114, no. 4, pp. 632–637, 1992. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Guo and H. Okamoto, “An experimental study on the fluid forces induced by rotor-stator interaction in a centrifugal pump,” International Journal of Rotating Machinery, vol. 9, no. 2, pp. 135–144, 2003. View at Publisher · View at Google Scholar
  5. R. Spence and J. Amaral-Teixeira, “A CFD parametric study of geometrical variations on the pressure pulsations and performance characteristics of a centrifugal pump,” Computers and Fluids, vol. 38, no. 6, pp. 1243–1257, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Ozturk, K. Aydin, B. Sahin, and A. Pinarbasi, “Effect of impeller-diffuser radial gap ratio in a centrifugal pump,” Journal of Scientific and Industrial Research, vol. 68, no. 3, pp. 203–213, 2009. View at Google Scholar · View at Scopus
  7. C. G. Rodriguez, E. Egusquiza, and I. F. Santos, “Frequencies in the vibration induced by the rotor stator interaction in a centrifugal pump turbine,” Journal of Fluids Engineering, vol. 129, no. 11, pp. 1428–1435, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Coutu, M. D. Roy, C. Monette, and B. Nennemann, “Experience with rotor-stator interactions in high head Francis runner,” in Proceedings of the 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguassu, Brazil, October 2008.
  9. E. Egusquiza, C. Valero, X. Huang, E. Jou, A. Guardo, and C. Rodriguez, “Failure investigation of a large pump-turbine runner,” Engineering Failure Analysis, vol. 23, pp. 27–34, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. Z. L. Qiu and A. K. Tieu, “Identification of sixteen force coefficients of two journal bearings from impulse responses,” Wear, vol. 212, no. 2, pp. 206–212, 1997. View at Publisher · View at Google Scholar · View at Scopus
  11. P. L. Jiang and L. Yu, “Dynamics of a rotor-bearing system equipped with a hydrodynamic thrust bearing,” Journal of Sound and Vibration, vol. 227, no. 4, pp. 833–872, 1999. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Pettinato, R. D. Flack, and L. E. Barrett, “Test results for a highly preloaded three-lobe journal bearing—effect of load orientation on static and dynamic characteristics,” Lubrication Engineering, vol. 57, no. 9, pp. 23–30, 2001. View at Google Scholar · View at Scopus
  13. M. Farhat, F. Avellan, and U. Seidel, “Pressure fluctuation measurements in hydro turbine models,” in Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 2002.
  14. X. Escaler, E. Egusquiza, M. Farhat, and F. Avellan, “Cavitation erosion prediction in hydro turbines from onboard vibrations,” in Proceedings of the 22nd IAHR Symposium on Hydraulic Machinery and Systems, Stockholm, Sweden, July 2004.
  15. B. Mateos-Prieto, Experimental contribution to rotor stator interaction in pump-turbine prototypes [Doctoral Thesis], Technical University of Catalonia, 2005.
  16. C. G. Rodriguez, Feasibility of on board measurements for predictive maintenance in large Hydraulic turbomachinery [Doctoral Thesis], Technical University of Catalonia, 2006.
  17. P. N. Saavedra and C. G. Rodriguez, “Accurate assessment of computed order tracking,” Shock and Vibration, vol. 13, no. 1, pp. 13–32, 2006. View at Publisher · View at Google Scholar · View at Scopus