Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014, Article ID 314892, 14 pages
http://dx.doi.org/10.1155/2014/314892
Research Article

Rotordynamic Evaluation of Full Scale Rotor on Tilting Pad Bearings with 0.1 and 0.3 Preload

1Beijing Key Laboratory of Health Monitoring and Self-Recovery for High-End Mechanical Equipment, Beijing University of Chemical Technology, Beijing 100029, China
2ROMAC, Mechanical & Aerospace Engineering, University of Virginia, Charlottesville, VA 22904, USA

Received 15 February 2013; Accepted 22 July 2013; Published 20 February 2014

Academic Editor: Valder Steffen

Copyright © 2014 Weimin Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. W. Lund, “Spring and damping coefficients for the tilting-pad journal bearing,” ASLE Transactions, vol. 7, pp. 342–352, 1964. View at Google Scholar
  2. American Petroleum Institute RP 684, API Standard Paragraphs Rotordynamic Tutorial: Lateral Critical Speeds, Unbalance Response, Stability, Train Torsional, and Rotor Balancing, American Petroleum Institute, Washington, DC, USA, 2nd edition, 2005.
  3. J. A. Kocur, J. C. Nicholas, and C. C. Lee, “Surveying tilting pad Journal bearing and gas labyrinth seal coefficients and their effect on rotor stability,” in Proceedings of the 36th Turbomachinery Symposium, Turbomachinery Laboratory, pp. 1–10, Texas A&M University, College Station, Tex, USA, 2007.
  4. T. Dimond, A. Younan, and P. Allaire, “A review of tilting pad bearing theory,” International Journal of Rotating Machinery, vol. 2011, Article ID 908469, 23 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Childs, A. Delgado, and G. Vannini, “Tilting-pad bearings: measured frequency characteristics of their rotordynamic coefficients,” in Proceedings of the 40th Turbomachinery Symposium, Turbomachinery Laboratory, pp. 33–45, Texas A&M University, College Station, Tex, USA, 2011.
  6. M. He, C. H. Cloud, and J. M. Byrne, “Fundmentals of fluid film journal bearing operation and modelling,” in Proceedings of the 34th Turbomachinery Symposium, Turbomachinery Laboratory, pp. 155–175, Texas A&M University, College Station, Tex, USA, 2005.
  7. J. C. Nicholas, “Tilting pad bearing design,” in Proceedings of the 23rd Turbomachinery Symposium, Turbomachinery Laboratory, pp. 179–194, Texas A&M University, College Station, Tex, USA, 1994.
  8. D. W. Childs and C. R. Carter, “Rotordynamic characteristics of a 5 pad, rocker-pivot, tilting pad bearing in a load-on-pad configuration; comparisons to predictions and load-between-pad results,” in Proceedings of the ASME Turbo Expo: Power for Land, Sea and Air, pp. 867–880, Orlando, Fla, USA, June 2009. View at Scopus
  9. A. Delgado, G. Vannini, B. Ertas, M. Drexel, and L. Naldi, “Identification and prediction of force coefficients in a five-pad and four-pad tilting pad bearing for load-on-pad and load-between-pad configurations,” in Proceedings of the ASME Turbo Expo: Power for Land, Seal and Air, pp. 463–472, Glasgow, UK, June 2010. View at Scopus
  10. A. Delgado, M. Librashi, and G. Vannini, “Dynamic characterization of tilting pad journal bearings from component and system level testing,” in Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, Copenhagen, Denmark, June 2012.
  11. C. H. Cloud, Stability of rotors supported by tilting pad journal bearings [M.S. thesis], University of Virginia, 2007.
  12. K. Ikeno, Y. Sasaki, R. Kawabata, S. Yoshida, and S. Hata, “Measurement of dynamic performance of large tilting pad journal bearing and rotor stability improvement,” in Proceedings of the 39th Turbomachinery Symposium, Turbomachinery Laboratory, pp. 19–29, Texas A&M University, College Station, Tex, USA, 2010.
  13. N. Takahashi, Y. Magara, M. Narita, and H. Miura, “Rotordynamic evaluation of centrifugal compressor using electromagnetic exciter,” in Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, Vancouver, Canada, 2011.
  14. P. Zhong, Rotor bearing system identification using time domain method [M.S. thesis], University of Virginia, 1997.
  15. B. C. Pettinato and C. H. Cloud, “Shop acceptance testing of compressor rotordynamic stability and theoretical correlation,” in Proceedings of the 39th Turbomachinery Symposium, pp. 31–42, Texas A&M University, College Station, Tex, USA. View at Google Scholar
  16. C. W. Lee, “A complex modal testing theory for rotating machinery,” Mechanical Systems and Signal Processing, vol. 5, no. 2, pp. 119–137, 1991. View at Google Scholar · View at Scopus
  17. C.-Y. Joh and C.-W. Lee, “Use of dFRFs for diagnosis of asymmetric/anisotropic properties in rotor-bearing system,” Journal of Vibration and Acoustics, vol. 118, no. 1, pp. 64–69, 1996. View at Google Scholar · View at Scopus
  18. C. Kessler and J. Kim, “Complex modal analysis and modal superposition for rotating machinery,” in Proceedings of the 17th International Modal Analysis Conference (IMAC '99), pp. 1930–1937, February 1999. View at Scopus
  19. Y. Bidaut, U. Baumann, and S. M. H. Al-Harthy, “Rotordynamic stability of a 9500 PSI reinjection centrifugal compressor equipped with a hole pattern seal- measurement versus prediction taking into accound the operational boundary conditions,” in Proceedings of the 38th Turbomachinery Symposium, Turbomachinery Laboratory, pp. 251–259, Texas A&M University, College Station, Tex, USA, 2009.
  20. T. W. Dimond, A. A. Younan, and P. Allaire, “A system identification method for excitation-frequency dependent rotordynamic coefficients,” in Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, Copenhagen, Denmark, June 2012.
  21. T. W. Dimond, A. A. Younan, and P. Allaire, “The effect of tilting pad journal bearing dynamic models on the linear stability analysis of an 8-stage compressor,” Journal of Engineering for Gas Turbines and Power, vol. 134, no. 5, Article ID 052503, pp. 1–7, 2012. View at Publisher · View at Google Scholar · View at Scopus