Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014, Article ID 436156, 10 pages
http://dx.doi.org/10.1155/2014/436156
Research Article

Development of a Numerical Model for an Expanding Tube with Linear Explosive Using AUTODYN

1Department of Aerospace Engineering, Chonbuk National University, 567 Baeje-daero, Deokjin-gu, Jeonju 561-756, Republic of Korea
2LANL-CBNU Engineering Institute Korea, Chonbuk National University, 567 Baeje-daero, Deokjin-gu, Jeonju 561-756, Republic of Korea
3Department of Mechatronics Engineering, Chonbuk National University, 567 Baeje-daero, Deokjin-gu, Jeonju 561-756, Republic of Korea
4Structures and Material Department, Korea Aerospace Research Institute, Daejeon 305-333, Republic of Korea

Received 24 October 2012; Accepted 14 March 2013; Published 24 March 2014

Academic Editor: Gyuhae Park

Copyright © 2014 Mijin Choi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Y. Chang and D. L. Kern, Super*Zip (linear separation) shock characteristics, 1986, http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19870011172_1987011172.pdf.
  2. L. J. Bement and M. L. Schimmel, “A manual for pyrotechnic design, development and qualification,” NASA Technical Memerandum 110172, 1995. View at Google Scholar
  3. J. R. Lee, C. C. Chia, and C. W. Kong, “Review of pyroshock wave measurement and simulation for space systems,” Measurement: Journal of the International Measurement Confederation, vol. 45, no. 4, pp. 631–642, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Y. Chang, “Pyrotechnic devices, shock levels, and their applications,” in Proceedings of the Pyroshock Seminar, ICSV9, 2002.
  5. NASA, “Pyroshock test criteria,” NASA-STD-7003A, 2011.
  6. L. H. Richards, J. K. Vision, and D. J. Schorr, “Thrusting separation system,” US Patent, US5372071, 1993.
  7. W. C. Hoffman III, “Age life evaluation of space shuttle crew escape system pyrotechnic components loaded with hexanitrostilbene (HNS), NASA,” Technical Paper 3650, 1996. View at Google Scholar
  8. L. J. Bement and M. L. Schimmel, “Investigation of Super*Zip separation joint,” NASA Technical Memorandum 4031, 1988. View at Google Scholar
  9. M. Miyazawa and Y. Fukushima, “Development status of Japan’s new launch vehicle: H-II rocekt,” in Proceedings of the 40th Congress of the International Astronautical Federation, 1989.
  10. M. Quidot, “Some examples of energetic material modeling with LSDYNA,” in Proceedings of the 3rd European LS-DYNA Conference, 2001.
  11. G. E. Fairlie, “The numerical simulation of high explosives using AUTODYN-2D & 3D,” in Proceedings of the Institute of Explosive Engineers 4th Biannual Symposium (Explo '98), 1998.
  12. J. K. Chen, H. Ching, and F. A. Allahdadi, “Shock-induced detonation of high explosives by high velocity impact,” Journal of Mechanics of Materials and Structures, vol. 2, no. 9, pp. 1701–1721, 2007. View at Google Scholar · View at Scopus
  13. S. M. Muramatsu, “Numerical and experimental study of a pyroshock test set up for small spacecraft component,” Project Report, UPNA, 2010. View at Google Scholar
  14. J. Danyluk, Spall fracture of multi-material plates under explosive loading [M.S. thesis], Rensselaser Polytechnic Institute at Hartford, Hartford, Conn, USA, 2010.
  15. R. H. B. Bouma, A. E. D. M. van der Heijden, T. D. Sewell, and D. L. Thompson, “Chapter2. Simulations of deformation processes in energetic materials,” in Numerical Simulations of Physical and Engineering Processes, 2011. View at Google Scholar
  16. E. L. Lee, H. C. Hornig, and J. W. Kury, “Adiabatic expansion of high explosive detonation products,” Technical Report UCRL-50422, Lawrence Radiation Laboratory, University of California Livermore, Berkeley, Calif, USA, 1968. View at Google Scholar
  17. M. A. Meyers, Dynamic Behavior of Materials, Wiley, New York, NY, USA, 1994.
  18. D. J. Steinberg, S. G. Cochran, and M. W. Guinan, “A constitutive model for metals applicable at high-strain rate,” Journal of Applied Physics, vol. 51, no. 3, pp. 1498–1504, 1980. View at Publisher · View at Google Scholar · View at Scopus
  19. J. N. Johnson, “Dynamic fracture and spallation in ductile solids,” Journal of Applied Physics, vol. 52, no. 4, pp. 2812–2825, 1981. View at Publisher · View at Google Scholar · View at Scopus
  20. ANSYS, Workshop 7. Ship Blast, ANSYS Training Manual, ANSYS, Cecil Township, Pa, USA, 2010.
  21. ANSYS, Chapter 1. Introduction to AUTODYN, AUTODYN Training Manual, ANSYS, Cecil Township, Pa, USA, 2010.
  22. X. Quan, N. K. Birnbaum, M. S. Cowler, B. I. Gerber, R. A. Clegg, and C. J. Hayhurst, “Numerical simulation of structural deformation under shock and impact loads using a coupled multi-solver approach,” in Proceedings of the 5th Asia-Pacific Conference on Shock and Impact Loads on Structures, 2003.
  23. Century Dynamics, AUTODYN Theory Manual, Century Dynamics, Concord, Calif, USA, 2003.
  24. J. E. Shepherd, “Structural response of piping to internal gas detonation,” Journal of Pressure Vessel Technology, Transactions of the ASME, vol. 131, no. 3, pp. 0312041–03120413, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. J. Kanesky, J. Damazo, K. Chow-Yee, A. Rusinek, and J. E. Shepherd, “Plastic deformation due to reflected detonation,” International Journal of Solids and Structures, vol. 50, no. 1, pp. 97–110, 2013. View at Google Scholar
  26. A. J. Rosakis and G. Ravichandran, “Dynamic failure mechanics,” International Journal of Solids and Structures, vol. 37, no. 1-2, pp. 331–348, 2000. View at Google Scholar · View at Scopus
  27. S. Fordham, High Explosives and Propellants, Pergamon Press, Elmsford, NY, USA, 2nd edition, 1980.