Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014, Article ID 478270, 12 pages
http://dx.doi.org/10.1155/2014/478270
Research Article

Model Based Research of Dynamic Performance of Shaft-Bearing System in High-Speed Field

School of Manufacturing Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China

Received 12 May 2013; Revised 18 February 2014; Accepted 19 February 2014; Published 17 April 2014

Academic Editor: Valder Steffen

Copyright © 2014 Teng Hu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Palmgren, Ball and Roller Bearing Engineering, SKF industries, Burbank Philadelphia, 3rd edition, 1959.
  2. A. B. Jones, “Ball motion and sliding friction in ball bearings,” Journal of Basic Engineering, vol. 3, pp. 1–15, 1959. View at Google Scholar
  3. A. B. Jones, “A general theory for elastically constrained ball and radial roller bearings under arbitrary load and speed condition,” Journal of Basic Engineering, vol. 82, no. 2, pp. 309–320, 1960. View at Google Scholar
  4. T. A. Harris, Rolling Bearing Analysis, CRC Press, Florida, 5th edition, 2006.
  5. P. K. Gupta, Advanced Dynamics of Rolling Elements, Springer, New York, NY, USA, 1984.
  6. N. T. Liao and J. F. Lin, “A new method for the analysis of deformation and load in a ball bearing with variable contact angle,” Journal of Mechanical Design, Transactions of the ASME, vol. 123, no. 2, pp. 304–312, 2001. View at Google Scholar · View at Scopus
  7. I. Zverv, Y.-S. Pyoun, K.-B. Lee, J.-D. Kim, I. Jo, and A. Combs, “An elastic deformation model of high speed spindles built into ball bearings,” Journal of Materials Processing Technology, vol. 170, no. 3, pp. 570–578, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Kang, P.-C. Shen, C.-C. Huang, S.-S. Shyr, and Y.-P. Chang, “A modification of the Jones-Harris method for deep-groove ball bearings,” Tribology International, vol. 39, no. 11, pp. 1413–1420, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. Kang, C.-C. Huang, C.-S. Lin, P.-C. Shen, and Y.-P. Chang, “Stiffness determination of angular-contact ball bearings by using neural network,” Tribology International, vol. 39, no. 6, pp. 461–469, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Jedrzejewski and W. Kwasny, “Modelling of angular contact ball bearings and axial displacements for high-speed spindles,” CIRP Annals, Manufacturing Technology, vol. 59, no. 1, pp. 377–382, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. Guo and R. G. Parker, “Stiffness matrix calculation of rolling element bearings using a finite element/contact mechanics model,” Mechanism and Machine Theory, vol. 51, pp. 32–45, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. H. D. Nelson, “A finite rotating shaft element using Timoshenko Beam Theory,” Journal of mechanical design, vol. 102, no. 4, pp. 793–803, 1980. View at Google Scholar · View at Scopus
  13. C.-W. Lin, J. F. Tu, and J. Kamman, “An integrated thermo-mechanical-dynamic model to characterize motorized machine tool spindles during very high speed rotation,” International Journal of Machine Tools and Manufacture, vol. 43, no. 10, pp. 1035–1050, 2003. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Ertürk, H. N. Özgüven, and E. Budak, “Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF,” International Journal of Machine Tools and Manufacture, vol. 46, no. 15, pp. 1901–1912, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. T. L. Schmitz, M. A. Davies, and M. D. Kennedy, “Tool point frequency response prediction for high-speed machining by RCSA,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 123, no. 4, pp. 700–707, 2001. View at Google Scholar · View at Scopus
  16. S. Jiang and S. Zheng, “A modeling approach for analysis and improvement of spindle-drawbar-bearing assembly dynamics,” International Journal of Machine Tools and Manufacture, vol. 50, no. 1, pp. 131–142, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. J.-S. Chen and Y.-W. Hwang, “Centrifugal force induced dynamics of a motorized high-speed spindle,” International Journal of Advanced Manufacturing Technology, vol. 30, no. 1-2, pp. 10–19, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. E. Wang, B. Wu, Y. Hu et al., “Dynamic parameter identification of tool-spindle interface based on RCSA and Particle Swarm Optimization,” Shock and Vibration, vol. 20, no. 1, pp. 69–78, 2013. View at Publisher · View at Google Scholar
  19. J. H. Ginsberg, Mechanical and Structural Vibrations Theory and Applications, China Astronautic Publishing House, 2005.
  20. K.-J. Bathe, Finite Element Procedures, Prentice Hall, Upper Saddle River, New Jersey, NJ, USA, 1982.
  21. J. Vance, F. Zeidan, and B. Murphy, Machinery Vibration and Rotordynamics, John Wiley & Sons, New Jersey, NJ, USA, 2010.
  22. NSK, Super precision bearings, CAT. No.E1254f 2011 D-2 Printed in Japan NSK Ltd.2003, 2011.