Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015 (2015), Article ID 143254, 15 pages
http://dx.doi.org/10.1155/2015/143254
Research Article

Experimental Studies on Finite Element Model Updating for a Heated Beam-Like Structure

1State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2Shanghai Institute of Satellite Engineering, Shanghai 200240, China
3MOE Key Laboratory of Dynamics and Control of Flight Vehicle, School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China

Received 22 September 2014; Revised 6 December 2014; Accepted 11 December 2014

Academic Editor: Tony Murmu

Copyright © 2015 Kaipeng Sun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. A. Thornton, Thermal Structures for Aerospace Applications, AIAA, Reston, Va, USA, 1996.
  2. J. Avsec and M. Oblak, “Thermal vibrational analysis for simply supported beam and clamped beam,” Journal of Sound and Vibration, vol. 308, no. 3–5, pp. 514–525, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. J. D. Hios and S. D. Fassois, “Identification of a global model describing the temperature effects on the dynamics of a smart composite beam,” in Proceedings of the International Conference on Noise and Vibration Engineering (ISMA '06), pp. 3279–3293, Leuven, Belgium, September 2006. View at Scopus
  4. J. D. Hios and S. D. Fassois, “Stochastic identification of temperature effects on the dynamics of a smart composite beam: assessment of multi-model and global model approaches,” Smart Materials and Structures, vol. 18, no. 3, Article ID 035011, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Kazemirad, M. H. Ghayesh, and M. Amabili, “Thermal effects on nonlinear vibrations of an axially moving beam with an intermediate spring-mass support,” Shock and Vibration, vol. 20, no. 3, pp. 385–399, 2013. View at Publisher · View at Google Scholar
  6. H. Cheng, H. B. Li, R. H. Jin, Z. Q. Wu, and W. Zhang, “The review of the high temperature modal test for the hypersonic vehicle,” Structure & Environment Engineering, vol. 39, no. 3, pp. 52–59, 2012. View at Google Scholar
  7. L. F. Vosteen and K. E. Fuller, “Behavior of a cantilever plate under rapid heating conditions,” NACA RM L55E20, 1955. View at Google Scholar
  8. M. W. Kehoe and H. T. Snyder, “Thermoelastic vibration test techniques,” NASA Technical Memorandum 101742, 1991. View at Google Scholar
  9. R. R. McWithey and L. F. Vosteen, “Effects of transient heating on the vibration frequencies of a prototype of the X-15 wing,” NASA Technical Note D-362, 1960. View at Google Scholar
  10. A. M. Brown, “Temperature-dependent modal test/analysis correlation of X-34 FASTRAC composite rocket nozzle,” Journal of Propulsion and Power, vol. 18, no. 2, pp. 284–288, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. L. Garibaldi and S. Fassois, “MSSP special issue on the identification of time varying structures and systems,” Mechanical Systems and Signal Processing, vol. 47, no. 1-2, pp. 1–2, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. S.-D. Zhou, W. Heylen, P. Sas, and L. Liu, “Parametric modal identification of time-varying structures and the validation approach of modal parameters,” Mechanical Systems and Signal Processing, vol. 47, no. 1-2, pp. 94–119, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Bellino, S. Marchesiello, and L. Garibaldi, “Experimental dynamic analysis of nonlinear beams under moving loads,” Shock and Vibration, vol. 19, no. 5, pp. 969–978, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Yan and R. X. Gao, “Hilbert-huang transform-based vibration signal analysis for machine health monitoring,” IEEE Transactions on Instrumentation and Measurement, vol. 55, no. 6, pp. 2320–2329, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Liu and X. Sun, “System identification and model reduction for a single-link flexible manipulator,” Journal of Sound and Vibration, vol. 242, no. 5, pp. 867–891, 2001. View at Publisher · View at Google Scholar · View at Scopus
  16. C. S. Huang, S. L. Hung, W. C. Su, and C. L. Wu, “Identification of time-variant modal parameters using time-varying autoregressive with exogenous input and low-order polynomial function,” Computer-Aided Civil and Infrastructure Engineering, vol. 24, no. 7, pp. 470–491, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. W. C. Su, C. Y. Liu, and C. S. Huang, “Identification of instantaneous modal parameter of time-varying systems via a wavelet-based approach and its application,” Computer-Aided Civil and Infrastructure Engineering, vol. 29, no. 4, pp. 279–298, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. K. Yu, K. Yang, and Y. Bai, “Estimation of modal parameters using the sparse component analysis based underdetermined blind source separation,” Mechanical Systems and Signal Processing, vol. 45, no. 2, pp. 302–316, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. K. Yu, K. Yang, and Y. Bai, “Experimental investigation on the time-varying modal parameters of a trapezoidal plate in temperature-varying environments by subspace tracking-based method,” Journal of Vibration and Control, 2014. View at Publisher · View at Google Scholar
  20. J. E. Mottershead and M. I. Friswell, “Model updating in structural dynamics: a survey,” Journal of Sound and Vibration, vol. 167, no. 2, pp. 347–375, 1993. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Marwala, Finite-Element-Model Updating Using Computational Intelligence Techniques, Springer, London, UK, 2010.
  22. J. E. Mottershead, M. Link, and M. I. Friswell, “The sensitivity method in finite element model updating: a tutorial,” Mechanical Systems and Signal Processing, vol. 25, no. 7, pp. 2275–2296, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. T. Marwala, “Finite element model updating using wavelet data and genetic algorithm,” Journal of Aircraft, vol. 39, no. 4, pp. 709–711, 2002. View at Publisher · View at Google Scholar · View at Scopus
  24. R. Perera, S.-E. Fang, and A. Ruiz, “Application of particle swarm optimization and genetic algorithms to multiobjective damage identification inverse problems with modelling errors,” Meccanica, vol. 45, no. 5, pp. 723–734, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Luczak, S. Manzato, B. Peeters, K. Branner, P. Berring, and M. Kahsin, “Updating finite element model of a wind turbine blade section using experimental modal analysis results,” Shock and Vibration, vol. 2014, Article ID 684786, 12 pages, 2014. View at Publisher · View at Google Scholar
  26. T. W. Simpson, “Comparison of response surface and kriging models in the multidisciplinary design of an aerospike nozzle,” Tech. Rep. NASA/CR-1998-206935, 1998. View at Google Scholar
  27. K. P. Sun, H. Y. Hu, and Y. H. Zhao, “Identification of time-varying modal parameters for thermo-elastic structure subject to unsteady heating,” Transactions of Nanjing University of Aeronautics and Astronautics, vol. 31, no. 1, pp. 39–48, 2014. View at Google Scholar · View at Scopus
  28. K. Sun, Y. Zhao, and H. Hu, “Identification of temperature-dependent thermal—structural properties via finite element model updating and selection,” Mechanical Systems and Signal Processing, vol. 52-53, pp. 147–161, 2015. View at Publisher · View at Google Scholar
  29. M. Link, “Updating of analytical models—basic procedures and extensions,” in Modal Analysis and Testing, J. M. Silva and N. M. Maia, Eds., pp. 281–304, Springer, Dordrecht, The Netherlands, 1999. View at Google Scholar
  30. R. Eberhart and J. Kennedy, “A new optimizer using particle swarm theory,” in Proceedings of the 6th International Symposium on Micro Machine and Human Science, pp. 39–43, IEEE, Nagoya, Japan, October 1995. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. Shi and R. C. Eberhart, “A modified particle swarm optimizer,” in Proceedings of the IEEE World Congress on Computational Intelligence and the 1998 IEEE International Conference on Evolutionary Computation Proceedings, pp. 69–73, IEEE, Anchorage, Alaska, USA, May 1998. View at Publisher · View at Google Scholar
  32. T. Huang and A. S. Mohan, “A hybrid boundary condition for robust particle swarm optimization,” IEEE Antennas and Wireless Propagation Letters, vol. 4, no. 1, pp. 112–117, 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. R. C. Eberhart and Y. Shi, “Comparing inertia weights and constriction factors in particle swarm optimization,” in Proceedings of the 2000 Congress on Evolutionary Computation, IEEE, La Jolla, Calif, USA, 2000.
  34. G. Matheron, “Principles of geostatistics,” Economic Geology, vol. 58, no. 8, pp. 1246–1266, 1963. View at Publisher · View at Google Scholar · View at Scopus
  35. T. Goel, R. T. Hafkta, and W. Shyy, “Comparing error estimation measures for polynomial and kriging approximation of noise-free functions,” Structural and Multidisciplinary Optimization, vol. 38, no. 5, pp. 429–442, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. S. N. Lophaven, H. B. Nielsen, and J. Søndergaard, “DACE: A Matlab Kriging toolbox, version 2.0,” Tech. Rep. IMM-TR-2002-12, Technical University of Denmark, Kongens Lyngby, Denmark, 2002. View at Google Scholar
  37. COMSOL Multiphysics Corporation, “Structural Mechanics-Verification Models,” 2013.